Aaron in Mohnton Pa Posted September 6, 2019 Report Share Posted September 6, 2019 (edited) This is original standard armament ammunition chute for for 7.62x51. This section is 6 and a half feet long and is in perfect condition. This was used on a 4,000 round drum to feed a minigun on a Cobra Attack Helicopter. This has the rare / specific connectors needed for the drum..It will work with any 7.62 gun as long as the gun has the correct brackets and adapters to mount it. The chute comes apart very easy so you can set this up any length you want. Price - $1,400 Aaron - Mohnton, Pa Sales@BeltFeds.Com Picture below for reference of the 4000 round drum this was on. I do not have any drums available. There is a board member here on Sturm that has one for sale (not advertised) ... will pass his info on to the buyer if interested .... also had somebody contact me that has the correct wiring harness for the drum to hook to the gun if anyone needs one. Edited September 6, 2019 by Aaron in Mohnton Pa Link to comment Share on other sites More sharing options...
74Detomaso Posted September 8, 2019 Report Share Posted September 8, 2019 If I may ask, is this the chute from the drum to the gun in the photo or the chute for the drum? Thanks Link to comment Share on other sites More sharing options...
Aaron in Mohnton Pa Posted September 8, 2019 Author Report Share Posted September 8, 2019 @74Detomaso , it is the exact same section of chute as in the photos on the drums... it consists of three specific connectors and 6.5 feet of chute. There is the drum end connector .. a connector mid chute to hold the ammo chute in position for proper feeding and then a gun end connector. The connectors and length of the chute was specific to this drum .. we took this section off a drum that came in. So it is as issued to the military Link to comment Share on other sites More sharing options...
johnsonlmg41 Posted September 8, 2019 Report Share Posted September 8, 2019 That chute is specific for those drums and while you can use the chute for other applications, separating them renders the drum nearly worthless. FWIW Link to comment Share on other sites More sharing options...
Aaron in Mohnton Pa Posted September 8, 2019 Author Report Share Posted September 8, 2019 @johnsonlmg41 , we are aware. This is being sold because we have other duplicates And this is an extra. There are a lot of drums out there without the proper chute, making this a unique item which is why we are selling it. Link to comment Share on other sites More sharing options...
74Detomaso Posted September 8, 2019 Report Share Posted September 8, 2019 Do you have the chute that goes from the drum to the gun? Thanks Link to comment Share on other sites More sharing options...
Aaron in Mohnton Pa Posted September 8, 2019 Author Report Share Posted September 8, 2019 @74Detomaso, this is the chute that goes from the drum to the gun. Unless I’m missing something? It has the m134 gun end on it Link to comment Share on other sites More sharing options...
74Detomaso Posted September 8, 2019 Report Share Posted September 8, 2019 Thank you, I was confused as johnsonlmg41 had me thinking it was the chute that came on the drum, not the chute from the drum to the gun.I will get back to you, thanks again. Link to comment Share on other sites More sharing options...
Aaron in Mohnton Pa Posted September 8, 2019 Author Report Share Posted September 8, 2019 @74Detomaso , sounds good. Yes this is the complete chute section and connectors to hook the drum up to a gun. Aaron Link to comment Share on other sites More sharing options...
Aaron in Mohnton Pa Posted September 10, 2019 Author Report Share Posted September 10, 2019 Chute is sold. Buddy I will mark sold as soon as I get to a desktop. Aaron - Mohnton, Pa Link to comment Share on other sites More sharing options...
Recommended Posts