Jump to content

WTS: 7.62x51 Ammunition Chute (over 6ft) for 4000 round drum


Recommended Posts

 This is original standard armament ammunition chute for for 7.62x51. This section is 6 and a half feet long and is in perfect condition. This was used on a 4,000 round drum to feed a minigun on a Cobra Attack Helicopter. This has the rare / specific connectors needed for the drum..It will work with any 7.62 gun as long as the gun has the correct brackets and adapters to mount it. The chute comes apart very easy so you can set this up any length you want. 

Price - $1,400

Aaron - Mohnton, Pa

Sales@BeltFeds.Com

8fHeCP4.jpg

KFOQsF6.jpg

W2Z7eYE.jpg

O0xze8W.jpg

Picture below for reference of the 4000 round drum this was on. I do not have any drums available. There is a board member here on Sturm that has one for sale (not advertised) ... will pass his info on to the buyer if interested .... also had somebody contact me that has the correct wiring harness for the drum to hook to the gun if anyone needs one. 

Usoled9.jpg

88pA592.jpg

Edited by Aaron in Mohnton Pa
Link to comment
Share on other sites

@74Detomaso , it is the exact same section of chute as in the photos on the drums... it consists of three specific connectors and 6.5 feet of chute. There is the drum end connector .. a connector mid chute to hold the ammo chute in position for proper feeding and then a gun end connector.

   The connectors and length of the chute was specific to this drum .. we took this section off a drum that came in. So it is as issued to the military 

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...