x50plt Posted August 19, 2019 Report Share Posted August 19, 2019 Hi, I purchased a Wilson/Swedish K and would like to purchase a suppressor for it. I would like any information on buying one. The only thing I found was the Jim Burgess can for the S&W 76 I am not sure that will work on the Swedish K, any info. will be appreciated. Thanks Greg Quote Link to comment Share on other sites More sharing options...
XR Ordnance LLC Posted August 20, 2019 Report Share Posted August 20, 2019 One option would be to round yourself up a Suomi M31 barrel, it should drop in to your M/45 and can be threaded for your suppressor of choice. I use a Bowers Vers 9s on mine and it sounds great. Feel free to send me a message if you take that route and need help w/ the threading or setup. Quote Link to comment Share on other sites More sharing options...
mike todd Posted August 20, 2019 Report Share Posted August 20, 2019 GREG, you can get a standard female end for your AWC and have a SUOMI barrel threaded for it to screw on. I cant remember exactly but think industry 9mm standard is 9/16 " that always gives me trouble but it is standard and the "guys" will know for sure. it could be 5/8" make sure you only buy a STEEL end for your can and push back hard if need be. most shops push the alloy to keep it an easy make. the alloy ends threads are just too easily damaged going off and on the gun. another PLUS FOR THAT AWC! don't cha just love it? Quote Link to comment Share on other sites More sharing options...
x50plt Posted August 20, 2019 Author Report Share Posted August 20, 2019 Thanks for the reply's, I am looking for an integral suppressor. I should have been more clear, sorry. Quote Link to comment Share on other sites More sharing options...
mike todd Posted August 21, 2019 Report Share Posted August 21, 2019 INTEGRAL? custom project ! nothing too serious. I have never looked at a Wilson K tube gun and how they were built Quote Link to comment Share on other sites More sharing options...
Toad Posted August 21, 2019 Report Share Posted August 21, 2019 I believe Tom Denall in Oregon made integral suppressors for the Swedish K in the past. I don't think he has a website, but the last contact info I saw for him was: Tom Denall - T.D. Manufacturing LLC Specialties: Class 2 P.O.Box 7919 Bend, OR 97708 Phone: (541) 389-6054 E-mail: tdmfgREMOVETHISSPAMGARD@earthlink.net Quote Link to comment Share on other sites More sharing options...
x50plt Posted August 25, 2019 Author Report Share Posted August 25, 2019 Toad, thank you I will call Tom on Monday. The front end on this is the same as all Swedish k guns. Quote Link to comment Share on other sites More sharing options...
BDMERC Posted August 25, 2019 Report Share Posted August 25, 2019 (edited) Yes avoid "alloy" couplings at all costs. I had a set up for a Beretta 12S that used a SG9 suppressor and an expensive custom made "alloy" end cap. After about a year the threads were screwed up to where barrel alignment became a concern. Had to have a steel end cap machined for it, and because I couldn't find spare parts, ended up with a dedicated suppressor (i.e. Factory M12s end cap is now modified to accept suppressor). Nice setup, but now I can't shoot the gun without the suppressor. Edited January 26, 2021 by BDMERC 1 Quote Link to comment Share on other sites More sharing options...
x50plt Posted August 25, 2019 Author Report Share Posted August 25, 2019 Thanks for the information Tom. Quote Link to comment Share on other sites More sharing options...
riflejunky Posted August 26, 2019 Report Share Posted August 26, 2019 On 8/19/2019 at 6:33 PM, x50plt said: Hi, I purchased a Wilson/Swedish K and would like to purchase a suppressor for it. I would like any information on buying one. The only thing I found was the Jim Burgess can for the S&W 76 I am not sure that will work on the Swedish K, any info. will be appreciated. Thanks Greg Please keep this post updated as you search out you suppressor. I have the same Wilson K and would also be interested in a suppressor. Quote Link to comment Share on other sites More sharing options...
x50plt Posted August 26, 2019 Author Report Share Posted August 26, 2019 4 hours ago, riflejunky said: Please keep this post updated as you search out you suppressor. I have the same Wilson K and would also be interested in a suppressor. I will let you know when I find one. 1 Quote Link to comment Share on other sites More sharing options...
Arctic Arms Posted January 25, 2021 Report Share Posted January 25, 2021 Anybody mess with a Ciener SW76 can? I picked one up cheap was was looking to mod it to fit my Sweed if possible. Still waiting on the transfer so i don't have it in front of me. 1 Quote Link to comment Share on other sites More sharing options...
Got Uzi Posted January 25, 2021 Report Share Posted January 25, 2021 I’ve been working on a Swedish K suppressor design in my spare time (which hasn’t been much lately) looks like I need to bump this project up the list. Also have the prototype red dot mount ready for final fitting on my Swedish K too..... 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.