AirCav73 Posted July 28, 2019 Report Share Posted July 28, 2019 Looking for recommendations for an engraving machine for a small Class 2 shop. Will be used for suppressor tubes and SBR(s). I know "you get" what you pay for, but they only manufacture and engrave 20 to 30 items a year. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
AgamisuArms Posted October 15, 2019 Report Share Posted October 15, 2019 (edited) I am also a Class 2 SOT. I use the Ghost Gunner Defense Distributed's CNC machine to mill out 80% lowers. They provided another set of code to enable me to engrave my FFL information on the lowers to be compliant with marking regulations. This is a small machine and works very well on milling out the lowers, and with the proper bits, was able to engrave a pretty detailed logo for my company. Here is their link! https://ghostgunner.net/ Great product, but took a bit for mine to come in as they were in the middle of their lawsuits. I hope this helps, but regardless keep me informed which way you go... Chris Edited October 15, 2019 by AgamisuArms Quote Link to comment Share on other sites More sharing options...
Cannonman Posted May 15, 2020 Report Share Posted May 15, 2020 I have a new Hermes engraveograph that I use. It takes some skill but it gets the job done. You need to be able to fix and repair it. there's no parts made for these old machines anymore. Mike Quote Link to comment Share on other sites More sharing options...
mattnh Posted December 23, 2020 Report Share Posted December 23, 2020 Fiber laser machines ~3K are pretty awesome - might be a good new revenue stream for them... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.