The Great 308

WTS:HK MSG90 Clone

Location: Ohio

4 posts in this topic

Bump price reduced to $3,400.00 $3,200.00 for rifle or $2,200.00  $2,000.00 for barreled receiver

Wanted to sell, HK MSG90 clone built by Jayson Cotter at IGF (Investment Grade Firearms):

· PTR 91 receiver
· HK MSG90 cocking handle
· US made BMP MSG90/PSG1 trunnion
· US made MSG90 barrel (Douglas xxx air gauged 24" MSG90 barrel)
· jdowney US made wood PSG1 grip (these are very nice!!). I have other pistol grips I could substitute if preferred and adjust the price.
· T profile receiver rails
· weld on ejection port buffer
· JFK made weld on picatinny receiver rail
· JFK made MSG90 cocking tube and front sight
· MAGPUL PRS2 stock with heavy two stage HK buffer (or will sell with Standard A2 Buttstock for $300 less)
· PTR hammer, sear, trigger: Williams Trigger Specialites SG1 set trigger with 4 to 4.5 pounds of pull on semi auto and 2 to 2.5 pounds of pull on set trigger. I have other trigger groups that I could substitute at a lower price.
· Cliped and pined trigger housing (I also have a US made SW Navy lower if you would prefer)
· paddle mag release
· HK PSG1/MSG90 forearm
· US made HK style flashhider
· New FMP bolt, bolt carrier, grip frame and FCG
· HK #9 40 degree locking piece, I will also include an additional 40 degree locking piece made by board member holescreek
· HK 1200m rear sight (or will sell with a standard HK Drum sight for $200 less)
· Harris bipod and adapter for forearm included. This is the swivel model with the locking notches on the legs, I will also include a pod lock with the bipod.
· Hard case, one 20rd steel HK mag finished to match rifle, four additional NIB 20rd mags and one Cetme 5rd mag included

This rifle was assembled from all new parts and has approximately 106 rounds fired to break in the barrel working from low power loads up. The rifle has a bolt gap of .018" with an HK #9, 40 degree locking piece and -2 rollers.

Price $3,800 Reduced to $3400  $3200.00 (I have over $4,500 in parts and labor in this rifle not including any shipping) shipping and insurance to your FFL included (your FFL must be willing to accept rifles from private individuals). I will only sell where legal, shipping to HI or AK will be $50 extra. Payment must be USPS money orders or certified check (Rifle will not ship until funds clear). Feel free to message me with any additional questions. This is also advertised on other boards.

I will sell the rifle in other configurations (price adjusted accordingly) or just the barreled upper ($2,200.00 $2,000.00 for barreled receiver). I can provide additional details and photos please feel free to contact me.

Thank you for looking, TG308

I will post some photos below. I can send additional photos to interested buyers. (Scope and mount not included)

IMG_0495%20Small_zpsvismy9tq.jpgIMG_0500%20Small_zpsgqt25tcu.jpgIMG_0501%20Small_zps5ywuucpk.jpgIMG_0499%20Small_zpsyphzrvok.jpgIMG_0503%20Small_zpsrsspbhay.jpgIMG_0505%20Small_zpsv0fvag4q.jpgIMG_0507%20Small_zps7yqjxbnw.jpgIMG_0508%20Small_zpsgsyayw2a.jpg1007288%20Small_zpsk1i3f9jc.jpg

Edited by The Great 308

Share this post


Link to post
Share on other sites

Bump price reduced to $3,400.00 for rifle or $2,200.00 for barreled receiver

Share this post


Link to post
Share on other sites

Bump: $3,400 for the rifle $2,200 for the Barreled reciever

I might be interested in any of the following or maybe a combination of a couple of them plus cash on your part: 

 

  1. Glock 21 Gen 3 or 4,
  2. possibly a Glock 22 Gen 3 or 4
  3. AK 47 Draco pistol with 12" barrel
  4. Possibly AK 47 rifle
  5. PTR 32, PTR 32K
  6. PTR K3P
  7. Kel Tec Sub 2000 in 9mm glock
  8. possibly Kel Tec Sub 2000 in 40sw glock
  9. possibly HK93 clone pistol with 12" barrel
  10. Remington 10 22 takedown model  

Thanks for looking, feel free to contact me with any questions

Edited by The Great 308

Share this post


Link to post
Share on other sites

Bump: $3,400 $3,200.00 for the rifle $2,200 $2,000.00 for the Barreled reciever

I might be interested in any of the following or maybe a combination of a couple of them plus cash on your part: 

 

  1. Glock 21 Gen 3 or 4,
  2. possibly a Glock 22 Gen 3 or 4
  3. AK 47 Draco pistol with 12" barrel
  4. Possibly AK 47 rifle
  5. PTR 32, PTR 32K
  6. PTR K3P
  7. Kel Tec Sub 2000 in 9mm glock
  8. possibly Kel Tec Sub 2000 in 40sw glock
  9. possibly HK93 clone pistol with 12" barrel
  10. Remington 10 22 takedown model  

Thanks for looking, feel free to contact me with any questions

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now