WTS: Vz58 Stock Adapters 5 Types $50

[StormWerkz Corp]

StormWerkz is proud to manufacture a series of stock adapters for the

Vz58.

-First is the Vz58 Stock Adapter, Factory Angle (SA-VZ58-01)
It allows the use of ar-15 type carbine stocks at the same angle as the

factory stock.
http://stormwerkz.com/stock-adapters/vz-58-stock-adapter-type-1-factor

y-angle/

-Second is the Vz58 Stock Adapter, Straight (SA-VZ58-02)
It allows the use of ar-15 type carbine stocks but is straight out from

the receiver, best to use with optics.
http://stormwerkz.com/stock-adapters/vz-58-stock-adapter-type-2-straig

ht/

-Third is the Vz58 Stock Adapter, Straight (SA-VZ58-03)
It allows the use of StormWerkz Stock Folding Mechanisms and

various other stock adapters.
Also ACE brand skeleton stocks will bolt directly on this model. Inline

configuration
http://stormwerkz.com/stock-adapters/vz-58-stock-adapter-type-3-straig

ht/

-Fourth is the Vz-58 Stock Adapter, Type 4, Factory Angle

(SA-VZ58-04)
It allows the use of StormWerkz Stock Folding Mechanisms and

various other stock adapters.
Also ACE brand skeleton stocks will bolt directly on this model. Follows

the factory stock angle.
http://stormwerkz.com/stock-adapters/vz-58-stock-adapter-type-4-factor

y-angle/

-Fifth is the Vz--58 Stock Adapter , Type 5 Straight , 1913 Picatinny

Interface
http://stormwerkz.com/stock-adapters/vz-58-stock-brace-adapter-type-5

-1913-interface/

CNC machined aluminum and anodized matte black, comes with all

mounting hardware.
No permanent alteration to the rifle.

$50 each
Please visit our website - www.stormwerkz.com

 

New Type 5 adapter

Edited March 8, 2019 by StormWerkz Corp

[StormWerkz Corp]

Bump !

[StormWerkz Corp]

bump