Jump to content

WTS-Incomplete MAG58/M240 Side Plates


Recommended Posts

For sale are unfinished MAG 58 or M240 right side plates.

Material is AISI 4340. All external machining is done, all internal pcokets are machined as well. No holes are drilled except the front pintle hole.

These will require some fitting to your parts because the parts they were based off did not seem to agree dimensionally in some ways. A specific example is the keyway for the front trunion.

The left plate had the keyway cut to one dimension, but the trunion had a wider key on it and didnt fit the plate. In that case, we used the narrower dimension from the factory plate to allow it to be fit in case your trunion is wider. In all cases, we left more material to allow it to be fit properly.

 

2 Chrome plates available  SPF

 

Non-chrome plates - $500 plus actual shipping from 35216

Chromed plates- $700 plus shipping

MAG Plates.jpg

Edited by notso
Updated SPF
Link to comment
Share on other sites

  • 5 weeks later...
  • 2 months later...
  • 5 months later...
  • 1 month later...
  • 2 weeks later...
  • 3 months later...
  • 5 weeks later...
  • 1 month later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...