kwbiker Posted May 11, 2018 Report Share Posted May 11, 2018 Having trouble removing folding stock. Removed allen bolt and for some reason stock will not come off. Had A model in past and no problems. Wanting to replace with wood stock to comply with state requirement. Also considering SBR. Any advice will be appreciated. Quote Link to comment Share on other sites More sharing options...
eMGunslinger Posted May 11, 2018 Report Share Posted May 11, 2018 (edited) Put the stock bolt back in 2-3 turns and tap it in the receiver with a rubber hammer. The stock is probably tight on the rear nut. But tapping it with the bolt out/disassembled the whole unit should come off with ease. Edited May 11, 2018 by eMGunslinger Quote Link to comment Share on other sites More sharing options...
kwbiker Posted May 11, 2018 Author Report Share Posted May 11, 2018 (edited) Thank you very much, worked like a charm. Hate to be a pest but the quick release wood stock fighting attachment. on the underside of receiver there is some kind of lever inside under the hole that the nub on the stock fits into. I don't remember this feature on the A model. MISSION ACCOMPLISHED!!!! Edited May 13, 2018 by kwbiker Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.