Jump to content

Uzi B model question


kwbiker

Recommended Posts

Having trouble removing folding stock. Removed allen bolt and for some reason stock will not come off. Had A model in past and no problems. Wanting to replace with wood stock to comply with state requirement. Also considering SBR. Any advice will be appreciated.

Link to comment
Share on other sites

Put the stock bolt back in 2-3 turns and tap it in the receiver with a rubber hammer. The stock is probably tight on the rear nut. But tapping it with the bolt out/disassembled the whole unit should come off with ease.

Edited by eMGunslinger
Link to comment
Share on other sites

Thank you very much, worked like a charm. Hate to be a pest but the quick release wood stock fighting attachment. on the underside of receiver there is some kind of lever inside under the hole that the nub on the stock fits into. I don't remember this feature on the A model. 

MISSION ACCOMPLISHED!!!!

Edited by kwbiker
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...