Jump to content

ATTN AK BUILDERS: WTS NEW Russian Saiga SBR or Pistol Project **PICS** PRICE DROP


Recommended Posts

ALL PARTS NEW

I have for sale one unfinished project Russian Saiga barreled receiver chambered in 7.62x39.

This started out as a complete 16" barrel rifle.

I bought this new, never fired it, started it as a SBR/ pistol build and never finished it.

Included is the complete receiver minus the FCG, with a 9 1/8 inch chrome lined, 11 degree target crowned and 24x1LH threaded barrel.

Also included are the original manuals, cleaning rod, safety selector, bolt head, bolt carrier with piston, recoil assembly, hammer spring, front sight parts, "krink" gas piston, unknown new reg length gas piston, 4 gas piston rivets, 2 grip screws, 3 grip screw nuts, axis pin, various e clips and sight/ gas block pins.

The bolt and carrier are matched to the barreled receiver.

Includes everything pictured except the gas tube.

Gas tube pictured is not included.

A note about the "krink" piston:

Gas piston made for use with AK pistol builds.
This is made from machined stainless steel then heat treated.
Overall length from end to end is 2.48".
The length excluding the threads is 2.0"

WAS $500.00 plus $35.00 ship NOW $350.00 I'll do FTF in Kokomo, IN. If you want to come get it. Or ships FREE to your FFL. **Updated 12-7-2016**

I accept Postal MO, PayPal and CC. Add 3% for PayPal and CC.

No fee for PayPal "friends and family" payment.

20160215_022538_zpsb3zssbno.jpg20160215_022939_zpshrjiuxqk.jpg20160215_022552-1_zpssbfl9ths.jpg20160225_031412-1_zpsoaqmemqe.jpg

Damn cat hairs...

 

2016-02-08%2000.50.41_zps5eanixmw.jpg20160208_002617_zps5pmfilrx.jpg20160208_002703_zps1fq5uh6p.jpg20160208_002732_zps3mtiuta4.jpg20160208_002642-1_zpsu0tqc2tw.jpg

20160208_002756_zps5ahqr3sp.jpg20160208_002801_zpsuke1lcd2.jpg20160208_002930_zps7oyed9md.jpg20160208_003507_zpsbkrj5hyv.jpg20160208_003011_zpsuwdcj9az.jpg20160209_202527-1_zpsroyutxdl.jpg

20160208_003131-1_zpsy4vmyrxr.jpg20160208_003302-1_zpskljl0ij6.jpg20160208_003238-1_zps9jcc5tft.jpg20160208_002846-1_zpscp30bbkn.jpg20160208_003212-1_zps3xcgffa0.jpg

 

Edited by IGC
ginormous price reduction
Link to comment
Share on other sites

Just a few questions:

1] Let me get this right, the bbl is pinned in the trunnion AND just slid into the receiver NOT riveted in correct?

2] What is the barreled trunnion from, new/used?

3] Did you buy the Saiga Carbine riffle NEW....have the box?

Thanks,

Link to comment
Share on other sites

On 2/9/2016 at 7:13 AM, 3lug said:

Just a few questions:

1] Let me get this right, the bbl is pinned in the trunnion AND just slid into the receiver NOT riveted in correct?

2] What is the barreled trunnion from, new/used?

3] Did you buy the Saiga Carbine riffle NEW....have the box?

Thanks,

The barrel is pinned to the trunion and the rivit heads are no longer present. The barrel and trunion are from the same orig rifle as the receiver and the documentation will verify that the numbers on the trunion are from the original rifle. Yes, I bought the rifle new in 2009 and started this as a sbr project and never finished. Everything is new as I have not fired it. It was fired by the "tester" at Izmash as it says in the documentation. No, I do not have the orig box.

Edited by IGC
added info
Link to comment
Share on other sites

  • 9 months later...
  • 2 months later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...