Search the Community

Showing results for tags 'ump'.

Found 14 results

  1. I have a used Post-86 Dealer Sample HK UMP 45 with Gemtech UMP silencer. The HK is all factory with a 0-1-2 trigger pack. It is a registered machine gun but in its current state only has semi and 2RB settings. This is obviously solved with installation of a F/A trigger pack. When I got the silencer the quick detach mount did not correctly seat on the flange on the barrel. As such I contacted Gemtech. This is a known issue, as Gemtech said, due to the variations in the flange on the barrel. Gemtech had me send them the MG and silencer and they threaded the barrel .578 x 28 and modified their silencer to match the threads. They also added a thread protector. I have test fired the weapon and silencer and it works correctly without baffle strike. Comes with one factory magazine. I may have a few more but I have to make sure I have them before I say I do. Both are on a Form 3 in my inventory and will be e-Filed to you. PD Demo Letter is required for the MG. I am not looking to separate the items nor am I looking to cut them up into parts kits. Asking $2200 delivered UPS/FedEx Ground to lower 48. Can accept business check/certified funds via photo of check front/back, or via CC (Visa/MC/Amex) +3.5%. Buyer’s responsibility to obtain PD Letter. I will take pictures shortly and post. Any inquiries please contact me via email at spreadfirearmsREMOVETHIS@aol.com or post below. I will monitor this thread periodically so email is probably easiest way to get a hold of me. Spreadfire Arms FFL/SOT 03 Austin, TX
  2. HK German Used Factory UMP .40 S&W Barrel - $499.95 Heckler & Koch Barrel 9mm - Standard - HK UMP - $499.95 Michaels Machines Barrel 9mm 3 Lug Threaded - HK UMP - $399.95 HK PARTS Barrel 9mm - 16.5 Inch - HK UMP - $499.95 Michaels Machines UMP .40 Cal 3-Lug & Threaded Barrel - 9/16 X 24 - $299.95 HKParts.net UMP .45 Threaded-3 Lug Barrel - 16 x 1 Right Hand - $299.95 HK PARTS HK UMP 9mm - Threaded Barrel - $299.95 HK PARTS UMP .45 Threaded-3 Lug Barrel - 16 x 1 Left Hand - $299.95 HK PARTS In stock and ready to ship today. HKPARTS https://www.hkparts.net/ (801) 987-3494
  3. WTS: HK UMP/USC 45acp SBR conversion by HDPS

    *Price Reduced to Sale 8/16/2018* I am Selling 1 HK UMP/USC 45acp SBR's HDPS conversions. Each rifle comes with 5-25rd mags and the original HK 16 inch barrel. These guns run like flawlessly and the conversion done by HDPS is the best out there. All original HK parts used for the conversion. The original 16inch barrel is new and unfired. I also have additional magazines for sale if wanted. I am asking $3000.00 + $35.00 shipping each. I accept discreet payment via payal + 3% fee or postal money orders only. All NFA rules apply, I am an FFL/SOT, please contact me with any questions (intelboy1@gmail.com) Thank You
  4. HK UMP .40 Used German Parts Kit - German - $1494.95 Heckler & Koch HK UMP .45 German Parts Kit - Used - $1795 Heckler & Koch 9mm Conversion Kit - UMP 9mm Barrel - HK UMP - $889.95 Michaels Machines HK UMP 9mm - Threaded Barrel - $299.95 HK PARTS In stock and ready to ship today. HKPARTS https://www.hkparts.net/ (801) 987-3494
  5. In stock and shipping daily! Ejector Lever For All HK UMP, USC's - $39.95 Heckler & Koch German UMP .40 Bolt Group - $649.95 Heckler & Koch Bolt Catch Spring - HK UMP, USC - $7.95 Heckler & Koch USC, UMP .45 Extractor - USA - $39.95 USA German USC .45 Bolt Group- Incomplete - $699.95 Heckler & Koch Recoil Rod Assembly Complete - USA - UMP, USC - $29.95 HK PARTS Semi Auto Bolt Carrier - 9mm - USC, UMP - $349.95 USA Semi Auto Bolt Carrier - 45 - USC, UMP - $349.95 USA In stock and ready to ship today. HKPARTS https://www.hkparts.net/ (801) 987-3494
  6. Each trigger counts as one US made compliant part needed for builds & conversions for US compliance of 922R. Compared to a factory HK trigger this trigger will make the pull and feel much better than a stock factory trigger. A huge improvement over a stock HK trigger. Qualities & features of each enhanced trigger: Made from 6061 aluminum Enhanced dimensions for the very best pull possible Adds 1 X 922R USA made compliant part You can get those here: https://www.hkparts.net/shop/pc/shownewarrivals.asp or by calling 801-987-3494
  7. HK UMP 45 - Semi Auto Bolt Carrier Complete with Ejector Includes Extractor Includes Firing pin Retaining Pin Includes Ejector Marked .45 Auto just like the OEM carrier The semi auto bolt group is required for HK USC to HK UMP caliber conversions. You can get it here: https://www.hkparts.net/shop/pc/Semi...P-12p18588.htm Or by calling us at 801-987-3494
  8. 25 Round Magazine - HK - German - UMP .45 Cal - $79.95 Heckler & Koch 30 Round Magazine - German - HK UMP .40 - $79.95 Heckler & Koch 10 Round Magazine - German - HK USC .45 - $69.95 Heckler & Koch 10 Round Factory Magazine Body - HK USC .45 - $28.95 Heckler & Koch 30 Round Magazine - US - UMP .40 - $49.95 HK PARTS 15 Round Magazine - USA - UMP .45 - $49.95 HK PARTS 15 Round Magazine - USA - 9mm - UMP - $49.95 HK PARTS In stock and ready to ship today. HKPARTS https://www.hkparts.net/ (801) 987-3494
  9. Listed for sale is your choice of a BRAND NEW Type 1 (Long Foot) or Type 2 (Short Foot) HK416C Stock and Handguard Kit. These are all factory German HK416C parts and are extremely rare hard to find. This stock and handguard kit will fit any HK MR556 or HK416 rifle. Once they dry up, that’s it! This is the most complete kit being offered as it includes the incredibly rare short German HK416C Handguard with handstop and mounting bolt. Kit includes these NEW German HK416C Parts: (Type 1) or (Type 2) HK416C Stock HK416C Specific Bolt Carrier HK416C Specific Flat Wire Recoil Spring HK416C Handguard with Hand Stop and Bolt Be careful who you purchase German parts from, especially HK416C parts!! I am a registered importer and these are not “Grey Area” illegal imports. I only have a couple so once they’re gone, that’s it. Sale includes USPS Priority Shipping, Buyer pays for Insurance if requested. Payment by USPS Money Orders, Discreet PayPal Friends/Family, and Venmo. $2,450 Shipped - First Come First Serve! Email me at HKPartsGuy@yahoo.com Thanks for looking!
  10. HK German USC/UMP Cocking Handle Assembly- Used - $44.95 Heckler & Koch HK USC, UMP Firing Pin Spring - $9.95 Heckler & Koch Ejector Lever For All HK UMP, USC's - $39.95 Heckler & Koch HK USC, UMP Firing Pin Assembly Complete - German - $79.95 Heckler & Koch USC, UMP 9mm Semi Auto Bolt Carrier - $499.95 Michaels Machines German USC .45 Bolt Group- Incomplete - $699.95 Heckler & Koch In stock and ready to ship today. HKPARTS https://www.hkparts.net/ (801) 987-3494
  11. I have for sale three (3) used Gemtech UMP silencers. They are PD trade-in's with not too much wear on them. There are some handling marks as seen in the photos. The baffles were visually inspected with no baffle strikes. They do not look shot out. As you know these are no longer made by Gemtech but they will still service and fit the can do a factory UMP. These are in .45 ACP caliber so they will also suppress a .40 as well.Price is $750 each + $30 shipping UPS Ground/FedEx Ground/USPS Priority Mail to lower 48. AK/HI etc may cost more, so please contact me for a shipping quote beforehand (I will ship those USPS for lowest cost). Note this is an NFA Weapon and buyer, if not an SOT, is responsible for paying the ATF Tax Stamp as well as any transfer fees on your end.I will obviously need a copy of your receiving dealer's FFL/SOT and payment to start the ATF forms. TX residents can Form 4 direct from me and pick up in Austin, TX. TX buyers add 8.25% sales tax or provide appropriate sales tax exemption status.I only have three, you know these aren't made anymore, and hard to get. So get them while I still have them.Each comes with one manual and the factory serial numbered matching cardboard box.Not looking for trades. Terms are 100% up front to initiate paperwork for transfer. I would prefer certified funds as credit cards will incur +3.5% (V/MC/Discover). Any questions please email. The photos attached are of the actual item for sale. Spreadfire Arms Austin, TX FFL/SOT 03 email: spreadfirearmsREMOVETHIS@aol.com
  12. Have a few HK G36 IDZ stocks for sale. These are brand new factory German HK stocks. I have a couple concave and a couple convex stocks that I don't need anymore. First 2 buyers will receive a new German HK G36 stock roll pin included with the stock. Brand new and ready to mount to your SL8/G36 conversion or factory G36. $400 each shipped/insured, PayPal and USPS Money Orders are accepted. E-mail me at HKPartsGuy@yahoo.com if interested.
  13. I have two rare Heckler & Koch G3 post sample machine guns available. They are in good condition and 7.62x51mm is the caliber. These will transfer on a form 5. Price is $2,400.00 each. These require law letter and will not be cut for parts kits. I just got several HK UMP45's traded in. They are $1295.00 each. They are in good condition. Come with one mag. They require LE letter. They have the 2rd burst lower but I can get you a brand new Navy Lower for $225.00 if your interested. These are available to be cut for parts kits but you must buy a minimum of 5 guns.These won't last long so please contact me if you interested. I have included a list of others I have available currently.Other GunsRomanian RPK - $1500.00MG15 (reman)- $2500.00Reman. Beretta AR70 - $1700.00Jap 98 - $1800.00HK UMP 40 - $1695.00HK MP5/40- $2500.00 (A3 stock, 4 pos. trigger)HK G36E- $1600.00 HK G36C - $3100.00FN F2000 - $2000.00Any new FN machine gun- email for quote (if serious only.)Silencers (Hard to Find):B&T US MP7 Silencer(NIB)- $1500.00(Used) Gemtech UMP 45 Silencer- $599.00Transferable:Colt M16A2 (burst marked but set up full auto) - $29,999.00 - beautiful gun!If you would like to be added to my exclusive dealer list to get updates about incoming guns before anyone else send me an email at jpowers8340@sbcglobal.net Call or text 580-695-8340 if you have any questions or orders.Email us if you have a specific request for a certain machine gun.We also buy Transferable machine guns, pre may machine guns, and post dealer sample machine guns so please let us know what you have. Or any other PD trade such as optics, magazines, or other NFA item.
  14. All parts are factory german and are used in good to very good condition unless otherwise noted. Prices do not include shipping via USPS priority mail. Cashiers check, mo, or CC+3.5%. ALL NFA RULES APPLY UMP .40 Barrel - $315 UMP .45 Barrel - $425 UMP .40 BCG - $295 UMP .45 BCG - $425 UMP .40 BCG milled for USC - $340 UMP Ejector - $20 UMP Barrel Pin $10 UMP Rear Sight - $20 Ump cocking tube - $8 Ump Cocking handle and pin - $15 UMP .40 Conversion Kit (barrel/bcg/recoil rod,1x 30 round mag) - $650 - USC Version(BCG milled) -$700 UMP Navy Lower EX- $285, UMP Navy - VG Ump 0,1,2 Burst lower $290 UMP Rear Stub - $250 FBI UMP lower (0,1) semi - Ex/like new $295 Ump sling $33 Front stub $8 complete cocking assembly $22.50