Search the Community

Showing results for tags 'suppressor'.

Found 50 results

  1. NFA paperwork shows this suppressor as registered as a model R-30 .308 suppressor and was manufactured by Blaylock Gun Works, Gun Barrel City, TX. It is 23" long and 1 5/8" diameter. This suppressor was in an NFA collection we acquired. We have no other information but if you have a Blaylock .308 suppressed rifle this could act as a very reasonably priced second suppressor for your rifle. It is available for $100 plus $30 UPS shipping. Stock # N-1200 Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant.
  2. WTS: Barrett QDL $2050

    New in box Barrett QDL .50 BMG Suppressor on Form 3. mmcc18@sbcglobal.net
  3. On offer I have one Dead Air Ghost .45 that was used as a dealer demo. Less than 100 rounds were fired through this unit. It comes with all components it did when new, including it's box and paperwork. I have also fitted it with a brand new factory wipe. The suppressor is a modular design, which allows you both a K can and full size can with one stamp. These units are very hard to come by right now and all of my distributors are sold out. Please note these units do not come with pistons from the factory. That said, I have a used M16x1LH (HK USP Tactical) piston that I will make available to the buyer below dealer cost. These are very nice .45 cans! This suppressor is in my inventory on Form 3 and transfers tax free to your local SOT. Payment is by PayPal F&F, Venmo or USPS Money Order. Dead Air Ghost .45 - $725 plus shipping
  4. Good Afternoon Folks, I have one brand new B&T QD 3-Lug MP5 suppressor for sale. I special ordered one of these and ended up with two - so take advantage of the price. SOLD
  5. The Gunner's Mate is a FFL/SOT Dealer located in Little Rock, Arkansas. Please correspond with us at iowdefend@gmail.com. I check my email more often than I do messages here. We have plenty of A+ ratings on Gunbroker, and our main website is defendwaifu.com if you are concerned about verifying us. We have about 20 .22 suppressors and a couple larger caliber suppressors up for sale. Due to the absolutely saturated market and our need to offload them, a hefty discount will be given. For every additional suppressor you purchase, get 10% taken off your entire order. Up to 50% off total the selling price. Payment can be made through money order or check. Shipping will be USPS $25 for an individual suppressor, though if you buy more than one I will combine shipping where possible. There are no full and partial refunds, or exchanges, all items sold as-is. I'm pretty confident most of the silencerss here are in new condition. As always, I only e-file Form 3's. We do not offer local pickup. Here is a list of the suppressors and SBR/suppressor combos we have up for grabs. I have a Google Drive folder with the photos of many of these suppressors here: https://drive.google.com/drive/folders/1ifm-1kfolXXssocMtUcCFHbcupRL0KNd There are no photos of the SBR combos, due to COVID-19 it may take me a day or two to get photos of them. Also in the folder are photos of Tactical Solution SBX barrels for the 10/22. If you are interested, make us an offer. Here's a couple photos of the suppressors up for grabs. Better quality images can be found in the Drive link.
  6. Rebel DFNDR 45 and Rebel 44 suppressors, both new in the box. They are in my inventory and available for quick e-file transfer to your dealer. DFNDR 45 - $275 Rebel 44 - $475 Shipping $15 Thanks for looking and feel free to contact me if you have any questions.
  7. The SWD M-11 includes one box, a manual, strap, cleaning rod, high cap magazine and magazine loader. Package also includes an original MAC (M-10) 9mm suppressor made by Military Armament Corp from Atlanta, GA. This is a full size M10 factory suppressor in excellent condition with wipes that look brand new. Will transfer on Form 3. Firearm and suppressor will be transferred on form 3e-form to a C-3 dealer. Price - $6995 plus $150 Fedex priority overnight shipping & insurance. Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant.
  8. Good Afternoon Folks, I'm looking for a new or used Gemtech Aurora first generation. Ideally, I'd like the can to be in a dealer inventory on a F3, but I'll consider one that is on a F4 if need be. I'm willing to purchase a can that already has it's wipes shot out, at the right price. Thanks,
  9. For sale is a new SRT Arms .22 LR Cheyenne XL Suppressor, with case. $250 shipped to your dealer. On my books. Will transfer tax free to your dealer. We do EFile for form 3. Insurance optional. WMEM,Inc. 07FFL/SOT wmeminc@gmail.com
  10. WTS Sionics suppressor

    SWD Sionics Suppressor on F4 in VA- $600 -Original M11/9 Suppressor -Recored with Titanium baffles
  11. I have for sale as shown in pics a Silencerco Specwar 5.56mm Suppressor. Suppressor is New in Box and includes a Custom Case. $300.00 + Shipping ( Will get you actual Shipping ) Thank you for looking, Murray over in Carolina
  12. This is an original HK German manufactured MP5-SD 9mm suppressor and not an aftermarket U.S. made product. Imported by HK Inc. Sterling, VA. This could be a good back up suppressor for someone with a pre-sample HK MP5-SD, someone wanting an authentic HK SD suppressor or a law enforcement agency wanting a back-up suppressor for their MP5-SD submachine guns. Since this was manufactured in Germany it is considered to be a pre-86 dealers sample but a keeper. Buyer pays $30 FedEx priority shipping and insurance. Ready to transfer to a class III dealer on an ATF e-form 3. Used condition. Does not require a law enforcement letter. Price - $250 Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant.
  13. This is an MP5-SD suppressor made by S&H Arms for their HK MP5-SD submachine guns. Be a nice inexpensive back-up for someone with an S&H SD. Looking down the suppressor with a light, it appears to never have been fired. Fully transferable. 12" long. Buyer pays $30 for FedEx priority shipping and insurance. Suppressor is ready to transfer to a class III dealer on a ATF e-form 3. Price - $400 Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant.
  14. never fired. Colt m16 A1 Unfired GEMTECH “Quick Mount” adapter, mounted on short upper. A NEW Beta-C 100rd Drum Magazine with OD Pouch, Loader & Graphite. Asking $25,000 or best offer over 24k Please call or text for any info Tony 443-201-3088 yupihearya@gmail.com
  15. This is an original MAC-10 9mm suppressor made by the original manufacturer, Military Armament Corp, Powder Springs, GA. It does not appear to have been shot. Will transfer on an ATF e-form 3 to class III dealer. Fully transferable. Buyer pays $35 FedEx priority shipping and insurance. Asking $495 Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant. Norrell321
  16. New Ruger 77/44 sent to SRT Arms in AZ for Bison integral Suppressor and optional Douglas 1:11 fast twist barrel conversion. All parts and gun are brand new only test fired by SRT. ------ Detailed info about SRT Bison Suppressor Here: srtarms.com/7744-tc-rifles/ --------- Current Lead time is 5-6 Months for SRT Builds. $1895 Shipping included. Please call or email Ryan @ JB Silencers, Note we don't check direct messages on here often for fastest response please email me directly. 720-459-2686 or ryan@jbsilencers
  17. Walther MPK 9mm submachine guns with free AWC suppressor. $6995. Pre-May sales sample made in West German from 1963 to 1985 and named the "Short Machine Pistol". This firearm is a keeper if a sole proprietor C-3 ever drops his FFL. One high capacity 32 round magazine included and an AWC ( Auto Weapons Co.) MK9 suppressor at no charge. Open bolt mode of fire with safe, semi and full auto selector. Caliber is common 9x19mm with 6.8" barrel with folding stock and fire rate of about 550 round per minute. Buyer pays $100 Fedex shipping and insurance. Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third party sales. Firearm in this ad will be transferred to a class III dealer on an ATF form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell Inc. When a party offers the full advertised amount, they are automatically the official buyer and any other ongoing negotiations or conversations with other parties are no longer relevant. Norrell321
  18. Heckler and Koch HK45C Tactical factory threaded barrel, thread pitch 16x1 LH, exc+ condition cosmetically, mint bore, perfect threads, complete with barrel O-ring and knurled thread protector, $185 shipped, contact Bob at xanthus@asia.com. Thanks for looking.
  19. Unsolicited feedback from three very happy customers in the last few days... http://suppressortools.com --- ---
  20. New from Warren Innovative Technologies, LLC: The new and improved Omega 9K Wrench, which now has a three-lug spanner, which will work for both long and short three-lug mounts. Now everything you need for your Omega 9K is in one place! $35 for the first one and $25 for each additional. See the rest of our product line here: http://suppressortools.com See the YouTube review of our products by The Wound Channel here: https://youtu.be/PeE4en9jmZ0
  21. New by customer request from Warren Innovative Technologies, LLC: The improved Rugged Obsidian Super Wrench, now with added spanner for 3-lug mounts. It's four tools in one! Features (Left to right): - Front Cap Tool - 3-Lug Spanner - Closed-End Mount Tool - Open-End Mount Tool (for torqueing mounts to barrels with left-handed threads and allowing tool removal from around the barrel) From our customer who requested it: "I keep my wrench in my back pocket at the range and want to have everything in one place without needing a separate 3-lug adapter that's easy to lose. Can you add that to your already great product?" See our complete product line here: suppressortools.com
  22. I have just received 4 of the last Gemtech Viper 45 Suppressors that Gemtech will ever make and they are available for sale now. These are only available because I personally wrangled for weeks with S&W to get the last inventory of Vipers released to the public and once they're gone, they're gone, as S&W has confirmed that they won't be making any more. These Viper 45s are brand new in box and include the locking collar mount for your MAC and in my opinion are the best looking and functioning suppressor for the M10. They will transfer to your dealer on a Form 3 and I eFile, my transfers have recently been getting approved in ~48 hours. Asking price for each Gemtech Viper 45 is SOLD.
  23. I sold off my M11 A1 to a form member here, so its time to get the suppressor sold. I realize my only real market is here in OKLAHOMA where the suppressor lives, and that the stamp is worth more than the suppressor. If you're looking for an era-appropriate suppressor for your Mac 11 in .380 with the correct threads, this is your lucky day! SWD inc / Cobray .380 Form 4 in Oklahoma City $150 OBO. Happy to sell out of state but obviously that'll require two stamps...
  24. WTS : New Full Auto Rated Suppressors Elite Iron has been a premier designer and manufacturer of professional grade firearms equipment and accessories for 15 years. We are especially well known for our professional grade sound suppressors that are designed to provide enhanced accuracy and superior sound reduction for calibers ranging from .17 HMR through .50 BMG, which includes all favorite hunting calibers and wildcat cartridges. The CQC1 was designed with HRT, ERT, SWAT, and military personnel in mind to provide them with a compact and lightweight unit. The CQC1 is rated for .223/5.56. The CQC1 includes the CQC1 tactical brake for rifle attachment $620 normally $775 ___________________________________________________________________ The BATTLEDOG was designed to supply the tactical world with a small effective .30 cal suppressor. There has been increased demand for more knockdown power in close quarter situations and the BATTLEDOG is an excellent choice. This suppressor also works excellent on the 7.62×39, 5.56×45 and .300 Blackout short barrel rifles and greatly reduces the breech blow back on these systems. The 3 piece system includes the BRAVO 1 tactical brake for rifle attachment. $620 normally $775 ___________________________________________________________________ The BRAVO 1 was originally designed for the .308 ARMALITE AR-10 Gas Rifle. This model remains very popular due to its ability to handle a variety of different calibers and applications, including bolt action rifles. The BRAVO 1 uses the BRAVO 1 tactical brake to attach to the rifle, making swapping the suppressor to other weapons a breeze. The multi-caliber ability allows use of .300 Blackout, 6.5, .30-06 and .223/5.56 calibers Breech blowback on semi-automatic rifles is greatly reduced by this suppressor. $636 normally $795 ___________________________________________________________________ The DELTA MOD2 is a direct thread suppressor designed for .223/5.56 rifles only. This more compact design is ideal for close quarters or tight spaces. $576 normally $720 ___________________________________________________________________ Elite Iron strives to help our customers have all the information needed to make the best suppressor choice. Please feel free to call us at 406-244-0234 to ask any questions you might have. Class 3 Dealers: Email Kathy at info@EliteIron.com and mention our ad on Sturmgewehr.com to receive dealer pricing information. Thanks for looking, Kathy FFL/SOT in MT 406-244-0234 www.EliteIron.com
  25. What's going on, If you are a Virginia resident, and are trying to sell one of your suppressors, I'm the gent you want to meet. I'll buy the suppressors in the following categories in the following brands - QD cans in either 5.56 or 7.62 made by Surefire, AAC, Silencerco, or KAC. Hit me up with a message or email, and make me an offer! To reiterate, Virginia residents ONLY! You must be a private individual, not a dealer. Regards