Search the Community

Showing results for tags 'stg'.

Found 9 results

  1. Stemple 76/45 Takedown Gun (STG) Price Increase Announcement Effective March 1, 2019, STG machine gun prices will be increasing by $500 per gun. In 2003, the original inventor, John Stemple, collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. The STGs have earned an excellent reputation for reliability, durability, and versatility among class 3 collectors old and new. We are continually improving and expanding the options and accessories for these guns while providing excellent support and service to our longtime customers. We put a lot of thought into preserving the long-term value of the Stemple 76/45 machine guns in the STG parts design. The STG concept follows three basic design goals: 1) Protect the registered receiver from damage or wear so it doesn’t matter how much the gun is used. 2) Ensure any wear parts can be easily serviced and/or replaced when necessary. 3) Employ a flexible component design that is adaptive to alternative configurations, caliber conversions, and accessories. Since nothing is welded or hand-fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely-built and smooth-running submachine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. A special thank you to the class 3 collectors old and new who already own a Stemple Takedown Gun (STG). Without you, none of this would be possible. (Current Prices Listed Below) $14K $12.9K $12.9K STG U9 $13.5K STG 34k $12.9K JR Stemple Shoot 2018
  2. Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia - Fast E-Form Transfer to your FFL $12,900 In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. The Stemple STG M1A1/1928 is assembled from an original Stemple 76/45 machine gun receiver, newly made Stemple-compatible parts, and several original Thompson components. The Stemple 76/45 machine gun receiver inserts into a long receiver shroud. This holds the receiver in position with lower assembly and aligns the sear opening in the Stemple receiver with the new sear in the original Thompson fire control group. The bolt guide, bolt, barrel, mainspring, buffer, and guide rod assembly is a removable unit inserted through the front of the Stemple receiver. These main wear parts are easily repaired or replaced if necessary. The overall appearance of the STG M1A1/1928 is like that of an original M1A1, with the exception that the rectangular adapter housing for the Stemple 76/45 receiver tube is 3/16 in. taller and 3/4 in. longer than the original M1A1. Parts and Accessories Included With Each Gun:1 x 50 rd drum, 1 x 20rd mag, multi tool, wrench, vertical or horizontal foregrip, both picatinny rear sight & standard "L" sight, both barrels 10" M1A1 pattern barrel & 8" threaded barrel .578x28, and custom hard case with high density foam. Free Factory Training. 45 ACP Suppressor: add $425 STG M1A1/1928 Data Caliber: .45 acp Barrel Length: 10.5 in. M1 Pattern Barrel and 8 in. Threaded Barrel (.578-28) Magazine: Unmodified USGI M1A1/1928 Mags and Drums Rear Sight: Original M1A1 or "L" for 1928, and Picatinny Rail included Forend: vertical (reproduction) or horizontal (original) Cycle Rate: 750 rpm (Full-Auto/Safe only... no semi-auto function) Weight: 11 lbs (unloaded) Simple / DurableDesign: Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Easy-to-Replace Parts: There's nothing on these guns that cant be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back-and-forth. Available Service: If you need service, we are here to support our products. Shoot Cheap Ammo: We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Can't Get Too Hot: These are ideal for machine-gun shoots. The low-pressure 45ACP round cannot create enough heat in the barrel to damage the gun. There's no gas system to clog, and the open-bolt system negates any cook-off risk. Great Investment: Just ask someone who bought a transferable machine gun 10-20 years ago how they feel about their purchase. Most of them will say they wish they bought more. Also ask someone who sold a machine gun 10-20 year ago how they feel about the sale. Most of them will say they wish they never sold it. Since the ban on new registrations in 1986, the finite supply of transferable machine guns availble for individuals in the US has steadily appreciated in value. We put a lot of thought into preserving the Long-Term Value of these guns. They are designed for maximum durability and serviceability. The worst thing that can happen to a transferable machine gun is a damaged or broken receiver. The parts that can wear out in these STG configurations are not the registered parts. Further, the moving and impacted parts in the system are overbuilt for their function and easy to replace if necessary: minimal effort, zero fitting, and no need to send the gun to a specialist for repair. We stock plenty of spare parts and provide free service. These guns will outlast anything on the transferable market. To our customers: I’m a firm believer in ‘try before you buy’. If you’d like to see and shoot some of our guns I’d encourage you to make a trip to our facility in GA. It would be our pleasure to host. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. We can also go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585 http://www.brpguns.com/stemple-76-45-takedown-gun-stg-m1a1-1928-setup/
  3. BRP stg Stemple

    up for sale like new brp/stemple stg 76/45 comes with both long and short barrel. long barrel has had one 30rnd magazine fire through it. the short barrel has never been used has minor blemeshes and can be refinished if desired comes with 2 magazines and one drum price-$9850.00 DJS Firearms LLc mike 203-217-2657
  4. Looking for most parts, including receiver... Direct email only, please: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email.
  5. $14,000 Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia U45/U9 Package This package is a subgunner's dream. All in one box you've got a complete package to shoot 45ACP with Grease Gun mags or 9mm with Suomi drums and one suppressor to work with both calibers. Switching calibers simply requires changing the bolt, barrel, and magazine housing. It features a simple, smooth-running blow-back system. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. This gun is also ideal for use with a suppressor. The extra bolt weigh drastically slows the initial bolt blow-back thereby significantly reducing port noise common in open-bolt / blow-back SMGs. The package includes the following parts: • Stemple (STG) U45 Machine Gun with Heavy Bolt System: Variable weight bolt system with hydraulic buffer that allows shooters to customize performance with a variety of different ammo as well as the 45 to 9mm caliber conversion. • 2 x M3 Grease Gun Magazines • U9 Converison (bolt, barrel, magazine housing) • 2 x Suomi Drums • 1 x Suomi Magazine • Custom Hard Case • 45 ACP suppressor for use with both 45 ACP and 9mm setups • foregrip, bipod, multi-tool, & barrel locknut/muzzle cap tool (sights not included) U45 Data Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering for slow M3 Grease-Gun-like shooting performance Magazine: M3 Grease Gun (unmodified) 30 rds Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 500-750 adjustable system with hydraulic buffer, Select Fire (safe-semi-full) Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28, to use common suppressor U9 (SF) Conversion Data: Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 550-800 adjustable Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28 to use common suppressor Transferable In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. They are ‘new’ Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers. Simple / Durable Design Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam. Customizable By using Picatinny rails (MIL-STD-1913) for sights and hand guards, shooters can add a variety of accessories and optics. The configurations with the Adjustable Bolt System use common AR pattern stocks and grips with hundreds of options currently available. Easy-to-Replace Parts There’s nothing on these guns that can’t be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back and forth. Available Service If you need service, we are here to support our products. Shoot Cheap Ammo We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Can't Get Too Hot These are ideal for machine-gun shoots. The low-pressure pistol ammo cannot create enough heat in the barrel to cause a malfunction or damage the gun. There's no gas system to clog, and the open-bolt system negates any cook-off risk. Spade Grip Setups Also Available: http://www.brpguns.com/stemple-stg-spade-grip-kit/ Linkup with our other customers via our Stemple STG Facebook Group: https://www.facebook.com/groups/110088872841613/ Please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585
  6. MP44 bnz parts kit with cut receiver. Many matching parts, some stamped, some penciled. No numbers stamped on barrel. Bought some years ago to build, just too many projects. $6500 OBO. Direct email only, please: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email.
  7. SOLD ............No Longer Available This STG M1928 was purchased new from BRP and is still in "like new" condition. The wood is from original Thompson M1928 thus had minor dings and scratches when this gun was purchased. Gun runs flawlessly. Has never had a "hickup". Actually runs better than an original Thompson 1928. Comes with a 30rd Thompson magazine and STG takedown tool (not shown). Thompson accessories like the "gangster" vertical grip will fit this gun. The overall appearance of the STG M1928 with finned barrel, Cutts compensator and detachable stock is like that of an original M1928. The exceptions being that the rectangular adapter housing for the Stemple 76/45 receiver tube is 3/16 in. taller and 3/4 in. longer than the original and the charging handle is on the side (like the Thompson M1A1) instead of the top. On form 4 in SC. $200 tax to SOT or SC resident is included in price. Price: $10,000.00 Shipped ($200 tax stamp included) Shipping to lower 48 states by USPS Registered Mail (insurance extra) Please email questions to gordonspcl@aol.com, PM, or call Thanks for looking, James History of Stemple 76/45 Takedown Guns (STG) Transferable Machine Guns In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. Built for performance and durability BRP Corp stocks plenty of high-quality spare parts, and provide excellent service. The Stemple STG M1928 is assembled from an original Stemple 76/45 machine gun receiver, newly made Stemple-compatible parts, and several original Thompson components. The Stemple 76/45 machine gun receiver inserts into a long receiver shroud. This holds the receiver in position with lower assembly and aligns the sear opening in the Stemple receiver with the new sear in the original Thompson fire control group. The bolt guide, bolt, barrel, mainspring, buffer, and guide rod assembly is a removable unit inserted through the front of the Stemple receiver. These main wear parts are easily repaired or replaced if necessary.
  8. Stemple Takedown Gun (STG) U9 two Suomi 72 Round drums, two coffin mags, folding stock, extra barrel, bipod, tools specific to firearm. Also comes with case. Has approximately 400 rounds through the weapon. Possibly 160 rounds through supressor. Firearm and suppressor currently on (separate) Form 3/dealer. Buyer pays transfer tax. Price includes shipping (USPS) and insurance. A fun (and cheap) gun to shoot.. Here is a link from manufacturer for informational purposes only - http://www.brpguns.com/stemple-takedown-gun-stg-u9/ References available upon request for prior sales. Call or text John at 575-921-7578.
  9. Looking for info on full-auto conversion of the .22 cal GSG STG-44? Anyone making the necessary part(s)? General experiences or thoughts-in-hindsight from those that have done it would also be appreciated. I can be contacted directly at nick.gorgenNOSPAM@gmail.com if you prefer. Remove NOSPAM from email. Thanks!