Search the Community

Showing results for tags 'smg'.

Found 55 results

  1. Up for sale is a like new Mk760 that is fully transferable. Comes with the original box, manual, and sling. Gun is on a form 3 and will be transferred to your FFL after payment is cleared. For any questions or specific pictures, please text 225-439-1818. $8000 OBO Buyer pays shipping/insurance.
  2. Spectre Pistol M4 SMG SBR Top Folding Ready To Install As Original IF YOU WANT TO SBR YOUR SPECTRE ---------- YOU NEED THIS STOCK KIT! Complete new LIMITED production SPECTRE folding stock kit WITH ALL Mounting Hardware and installation instructions! CNC'd parts include: Locking latch, all mounting hardware ...... heat treated rear pivot mounting point and butt plate machined out of solid blocks of steel. Stock is correct length as the original folded/extended and locks on top of receiver as original. Assembled with solid steel rivets for strength, durability and safety. Locking latch and rear pivot mount are tig welded in place for strength. Butt plate is riveted and fitted to heavy weight airsoft rails for smooth operation. Stock has the same weight, feel and function as the RARE original Spectre SMG M4 stock with only slight cosmetic differences. Includes: New production stock finished in black oxide, all mounting hardware and complete installation instructions. Note: Pictured -- Pistol, Foregrip and magazine are NOT included. This is as close to the original stock you will find! VERY LIMITED PRODUCTION ONLY A FEW LEFT TO SELL! Stock may require fitting as the original. If you opp to install the locking detents [included] as the original, two small holes will need to be drilled in the rear sight base for detent assembly. Installation should be done by a qualified gunsmith for proper function, fit and safety. All NFA RULES APPLY Stock Kit: $1,350 Shipping: $15.00 USPS priority mail, insurance extra Payment: Bank check, Postal money order, Company check, Discreet PayPal +4% Payment due 6 days after commit to buy or will be sold to next buyer!
  3. Sterling MK5 Machine Gun Sterling MK5 just received from Don's Guns in Ft. Meyers FL. This Sterling MK5 was built on a virgin Wilson Tube (HF-XXX). Test fired only. This firearm is available for inspection. This is as perfect as it gets! Lots of pictures available. This is a 2 stamp gun on Form 4's in Michigan. Form 4 to out of state dealers are taking around 2 months. 100% Funds to start paperwork. $18,999 + Shipping and Insurance Open to TRADES for Belt Fed or Water Cooled aaron_sadler1(nospam)@yahoo.com Two, Three, one - Two, Three , Three - Two, Seven, Zero, Seven
  4. For sale is a great example of a West Hurley M1A1 Thompson. This gun was refinished by John Andrewski with an original lower and an original Savage barrel. Those razor corners that are typical on a WH receiver have been finished to a WW2 spec and the gun blued for an authentic WW2 finish. The gun comes with a sling as well as 6 mags. $15,500 OBO. If full asking price is received, seller will pay for first transfer as well as shipping. Thanks for looking and if anybody has any questions or needs more photos please email at bdomitrovich@hotmail.com. You can also call or text at 814-490-2174
  5. Iconic "Commercial" Savage 1928 Thompson Machine gun. PD Marked "MPD" The Tom Davis Book has other examples as Pictured. William Douglas Firearms Museum states only 150 of this variation made. Serial 17738 ; low number since the last Colt was 15041. Commercially Finished Like the Colts and in many Cases with Colt parts. This one has a Colt "anchor" proofed Buttstock, Colt Fire Control Parts.There were six Savage 1928 and 1928a1 Variations and this is the first one and the rarest. It has the New York Address and Patent Numbers Just like the Colts.These Commercial Guns for the Most Part Did not See the Harsher Military Service of the 1928a1's Retains over 90% of the original Du Lite Finish. Both Upper and Lower Halves Matching Serial Numbers. This example is more rare than any of the 15,000 Colts.One 30 Round Magazine and 3 20 round pre war NY Mags , A great addition for the Advanced Collector. This is on a Form 3 And will be E-Filed for Immediate Transfer at $40,995!
  6. Excellent With 95% Plus Of The Parkerized/Blued Finish With Minor Light Edge And High Spot Wear Overall And Signs Of Light Firing. This is a scarce example of an originally unfinished WWII 1928A1 Thompson submachine gun initially manufactured by the Savage Arms Company under license from the Auto-Ordnance Company and then completed by the Numrich Arms Company. In the early 1970s, George Numrich acquired a huge amount of WWII spare parts and partially completed Thompson submachine receivers and barreled receiver from both the Auto-Ordnance and Savage companies and at the same time imported a large numbers of Thompsons from overseas. Using that stock pile of parts, he completed/assembled all the remaining stock of receivers and barreled receivers from the two companies into complete 1928 Thompson SMGs. He was required to remark the receivers he completed with his "NAC" serial numbering, hence the current serial number "S-527235 NAC", and sold them as commercial weapons. The receiver is marked with "MODEL OF 1928 A1/NO. S-527235 NAC" and farther back "THOMPSON SUBMACHINE GUN/CALIBRE .45 AUTOMATIC CARTRIDGE". It still retains its original late production short pattern 10 1/2 inch barrel without any cooling fins, a late commercial model Thompson/Auto-Ordnance "CUTTS" marked compensator, horizontal forend, fully adjustable Lyman rear sight, and a detachable buttstock. The underside of the lower trigger housing is correctly numbered and matching serial number (S-527235 NAC) to the receiver. It has a dark gray parkerized receiver and a matte blued trigger housing and barrel assembly. It is fitted with the correct walnut forend, pistol grip and buttstock. This Thompson SMG is complete with a 30 round stick magazines and one drum magazine.Way Better than a Wet Hurley at the same price. This is basically a New World War Two Thompson This is on a Form 3 And will be E-Filed for Immediate Transfer at $23,995! $ 22,995 $22500
  7. Factory new KRISS Vector SMG chambered in .45. Dealer will not be renewing his license therefore no law letter required for manufacturers. $7,020 shipped.
  8. Sterling MK4 built on Sterling DLO tube by Andrewski in excellent condition. Runs flawlessly. On Form 4 in Texas. Form 4 lists Douglas L. Oefinger, Stamford, CT as manufacturer and Sterling MK4 as the model. I don't have any documentation from Andrewski but I called him on 11 November 2010. He looked in his book and confirmed he made this DLO Sterling for a Class III dealer in Texas in 2003. Will include 3 as new mags and an Australian style canvas mag pouch with the sale. Price $17,500. 100% funds starts transfer paperwork. Buyer to pay NFA stamps, shipping & insurance.
  9. Your choice of 32 round or 40 round. 5 magazines, as pictured, for $300 shipped to where legal only. Sorry no discounts for quantity since these were on the "last boat"! You can pay with c.c. Message me with your contact info. for payment instructions. Thanks! Minimum order of five (5)
  10. LET ME KNOW WHAT YOU HAVE; QUANTITY, CONDITION, AND PRICE. THANKS!
  11. New in box fully transferable on an ATF e-form 3 to a C-3 dealer. 9mm caliber open bolt select fire semi and full auto sub-machine gun, one new high cap magazine, cleaning rod, strap, magazine loader. and collapsible stock. Made by SWD Inc, Atlanta, GA . Buyer pay $75 Fed-Ex shipping and Insurance. Asking price $6995 Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant. Norrell321
  12. Our customer is asking $18,999 German MP-40 Submachine Gun Transferable 9mm machine gun German parts kit built on Wilson Arms receiver tube Some numbers matching Used - please see photos Comes with 2 mags and manual Functions properly Bore in very good condition, bright, strong rifling Insured Shipping $179 to most locations add 3.5% CC payment. Trades considered. DKMAGS 443 Old Highway 8 nw #102 New Brighton, MN 55112 651-633-3624 / Sales@dkmags.com
  13. Fully transferable TEC-9 submachine gun made by Intratec. Open bolt 9mm with full auto only mode of fire, threaded barrel and one magazine. This particular model is called the TEC-9 Mini and has a 3.5'' barrel and 10 .5" overall length and was originally developed by the Swiss as an inexpensive subgun for the military. TEC-9s were made between 1985 and 2001. Factory information shows they made numerous types of high capacity magazines for this firearm, such as 10, 20, 32, 36, 50 round and 72 round drums. Search Youtube for numerous videos of TEC-9 submachine guns in action. Buyer pays $100 Fedex shipping and insurance. $6995 You may have seen this ad before... someone accidentally marked it as sold, so it's back and REDUCED!! Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third party sales. Firearm in this ad will be transferred to a class III dealer on an ATF form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money order payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell Inc. When a party offers the full advertised amount, they are automatically the official buyer and any other ongoing negotiations or conversations with other parties are no longer relevant.
  14. M-11 SWD 9mm submachine gun $7400. Fully transferable on an ATF form 3 to a C-3 dealer. 9mm caliber open bolt select fire semi-and full auto submachine gun, one new magazine, with front pistol grip (M-11K) and collapsible stock. Made by SWD Inc, Atlanta, GA Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third party sales. Firearm in this ad will be transferred to a class III dealer on an ATF form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell Inc. When a party offers the full advertised amount, they are automatically the official buyer and any other negotiations or conversations with other parties are no longer relevant.
  15. TEC-9 submachine gun made by Intratec. $ 8,000 Fully transferable TEC-9 submachine gun made by Intratec. Open bolt 9mm with full auto only mode of fire, threaded barrel and one magazine. This particular model is called the TEC-9 Mini and has a 3.5'' barrel and 10 .5" overall length and was originally developed by the Swiss as an inexpensive subgun for the military. TEC-9s were made between 1985 and 2001. Factory information shows they made numerous types of high capacity magazines for this firearm, such as 10, 20, 32, 36, 50 round and 72 round drums. Search Youtube for numerous videos of TEC-9 submachine guns in action. Buyer pays $100 Fedex shipping and insurance. Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third party sales. Firearm in this ad will be transferred to a class III dealer on an ATF form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell Inc. When a party offers the full advertised amount, they are automatically the official buyer and any other ongoing negotiations or conversations with other parties are no longer relevant.
  16. German WW2 MP40 Sling

    I have for sale as shown in pic an Original German WW2 MP40 Sling. Sold my MP40 sometime back and had forgotten i had the sling. Sling is Marked CX0 44 (Very Light,But its there). Leather is Soft and Flexible. Very serviceable Sling. $100.00 + Postage. Ill get you actual Postage. Ill Accept as payment US Postal Money Order or PayPal (Discreet as a Gift Only, Friends & Family) Thank you for looking, -Murray Over In Carolina
  17. *Gemtech Mossad II silencer not included* Selling a Weapon Specialties (Weapspec) registered bolt that has been treated with Robar NP3. Exceptionally smooth and reliable. Host receiver originally stamped as a .45 caliber. Excellent condition and runs like a champ. Comes with nine 32rd and one 25rd magazines. $11,995. $11,495. Located on a Form 4 in AZ. Please call me with any questions. 03/22/2019: SOLD! Thank you all for your interest!Cheers! Richard (520) 891-2132
  18. Outstanding condition with chromed bolt. Came from a police department (HPPD #92 engraved) and designated on stock. Three S&W factory 36rd magazines included. $11,995. $11,495. Located on a Form 4 in AZ. Please call me with any questions. 03/22/2019: SOLD! Thank you all for your interest! Cheers! Richard 520-891-2132
  19. $14,000 Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia U45/U9 Package This package is a subgunner's dream. All in one box you've got a complete package to shoot 45ACP with Grease Gun mags or 9mm with Suomi drums and one suppressor to work with both calibers. Switching calibers simply requires changing the bolt, barrel, and magazine housing. It features a simple, smooth-running blow-back system. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. This gun is also ideal for use with a suppressor. The extra bolt weigh drastically slows the initial bolt blow-back thereby significantly reducing port noise common in open-bolt / blow-back SMGs. The package includes the following parts: • Stemple (STG) U45 Machine Gun with Heavy Bolt System: Variable weight bolt system with hydraulic buffer that allows shooters to customize performance with a variety of different ammo as well as the 45 to 9mm caliber conversion. • 2 x M3 Grease Gun Magazines • U9 Converison (bolt, barrel, magazine housing) • 2 x Suomi Drums • 1 x Suomi Magazine • Custom Hard Case • 45 ACP suppressor for use with both 45 ACP and 9mm setups • foregrip, bipod, multi-tool, & barrel locknut/muzzle cap tool (sights not included) U45 Data Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering for slow M3 Grease-Gun-like shooting performance Magazine: M3 Grease Gun (unmodified) 30 rds Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 500-750 adjustable system with hydraulic buffer, Select Fire (safe-semi-full) Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28, to use common suppressor U9 (SF) Conversion Data: Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 550-800 adjustable Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28 to use common suppressor If you are going to buy a transferable machine gun for some serious shooting, you should consider the Stemple Takedown Guns for these reasons: 1) Best service and support in the industry. 2) Most reliable. 3) Most durable. 4) Most controllable. 5) Most versatile: We have alternate caliber and rate configurations. Picatinny rails on the top of the receiver and shroud provide a variety of accessory options. We also have several shroud and barrel options, grip options, and stock options. 6) No-compromise manufacturing: We always ask the question: "What is the best?" "What is the best material to use? What is the best process to make the part? What is the best metal finish?" etc. 7) Easy maintenance: Drop-on replacement parts in stock. 8) Less expensive than comparable machine guns. 9) Modern gun: No "old world craftsmanship" or hand-fitting. We adhere to strict quality control to ensure interchangeable parts. 10) Shoot cheap ammo: We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. 11) Free factory training for our users. 12) Great investment: Just ask someone who bought a transferable machine gun 15 years ago how they feel about their purchase. Most of them will say they wish they bought more. Our supply of these great transferable machine guns is dwindling, prices will be increasing, and there will not be any more due to the 1986 ban. Don’t miss out!
  20. FS: Sterling MK5 SALE PENDING

    Sterling MK5 just received from KGB Armament. This Sterling MK5 was built on a virgin Wilson Tube (HF-XXX) It was then sent to Andy for his MK5 conversion. Test fired only. This firearm is available for inspection. Upgrades are (2) sight posts, custom red dot mount and Engraving on magwell. This is as perfect as it gets! Lots of pictures available. This is a 2 stamp gun on Form 4's in Michigan. 100% Funds to start paperwork. Trades: I am interested in a Transferable HK Trigger pack. DLO or LaFrance $25K + Shipping and Insurance SALE PENDING 12/12/2018 Matt(nospam)Vandervest@yahoo.com 2, Three, one - five, one , Zero - Seven,seven Seven, 6
  21. I have 4 of these NOS Savage bolts. They are all blued. I'd like to sell them all in one lot. I'm asking $175 for the lot and I'll take care of the priority mail shipping. If you use PP goods, please add the 3%. Thank you.
  22. Offering for sale an original, full size Israeli manufactured Action Arms UZI submachine gun. Condition is excellent and is in Action Arms box with all original accessories. (Note: Box serial number tag is different from gun but is correct for make and model) UZI is registered as a pre-86 Dealer Sample so it can only be transferred to a current FFL/SOT but can be retained if FFL license is discontinued. Also included is a transferable Ciener UZI Silencer with matching ported barrel. Very quiet with subsonic ammo. Price for entire package is $6,995 and everything is in stock and ready to transfer on a Form 3. Interested parties please contact: sales@aresdefense.com Thank you.
  23. As the title reads... Direct email only, please: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email.
  24. Ad retracted...
  25. StormWerkz - Uzi stock/brace adapter for the Sig MCX/MPX stocks and braces for the full size receiver Uzi. Adjustable vertically for iron sights or optics. Part # SA-UZI-02 Will not fit the Mini or Micro No mods to the Uzi $50 +shipping Uzi / Sig MPX adapter