Search the Community

Showing results for tags 'receiver'.

Found 11 results

  1. Here a a Philadelphia Ordnance 80% 1928A1 receiver. It is engraved on both sides., less patent numbers. not sure if this model had the patent numbers listed. Needs finish machining and a parts kit to match. $ 500.00 plus shipping.
  2. Mp5,Swede K and AK47 Receiver Pieces $65.00

    I have for sale as shown in Pic Several H&K Mp5 Receiver Pieces (Center Sections), a few Swede K Receiver Pieces and an AK47 Receiver Piece. These are all Original Receiver Pieces. Selling as a Lot only $65.00 plus Shipping I'll get you actual shipping Thank you for looking, Murray Over in Carolina
  3. WTS/WTT: Colt 6920 Upper-Receiver. Fired approximately 500 rounds. No bitmetal. Includes factory M4 handguards or Magpul MOE (your choice). Excellent condition. Reason for selling is want a lighter profile barrel. Interested in trades for Colt 6720 Upper-Receiver. $500+20 shipping. Thanx. SAMMY!
  4. For your consideration, a very nice USGI M1A1 Thompson SMG rear receiver demil. Good amount of meat on it, nice rear sight. No rust or damage aside from the obvious. $50 OBO shipped to US First unconditional "I'll take it" posted in this thread gets it Prompt Paypal gift or + fees for payment No trades CROSSPOSTED Thank you for looking!!
  5. WTB: USGI M1 Garand Stripped Receiver

    Looking for a nice condition, stripped, garand receiver. Not particular about mfg as long as its GI, just needs to be free of issues and able to be built into a shooter grade gun. Thanks
  6. WTS: Special sale until Christmas! 20% off the following prices from now to 12-25-2016. We have MG3/MG42/MG53 rear receiver repair sections normally $300 no FFL required. We also have ratchet plates $45 ( $70 with the charging handle slot cut). Full size and Mini Uzi repair sections $89 ea. No FFL required. Full size, Mini, and micro UZI striker assys. (full size $45, mini & micro $125ea) Buffer for full size Uzi $10 Buffer and spring assy for mini and micro Uzi $75 ea Full size and mini Uzi S/A feed ramps $25, Micro S/A feed ramp $30 Full size and mini F/A feed ramps $30 Ejector & rivet for full size, mini, or micro Uzi $15 per set Full size Uzi receiver shell (complete receiver without any welded parts) $90 (this is an FFL item and requires shipment to an FFL, no C&R) All the above prices will be discounted by the 20%. Shipping will be added to these prices. All shipments to Texas will require sales tax. No shipments outside the USA. You must be 21 years old to purchase. Do not order unless it is legal in your state. You are responsible for obeying all local, state, and federal laws. Contact us by email: globalmachine@embarqmail.com phone: 817-636-5606 fax: 817-636-5607 text 817-980-7537 We accept most credit cards. No Paypal. Thanks, Bill Nelson
  7. TSMG Auto Ord receiver nose piece. $100 shipped. This came off one of the Sportsmansguide.com 45 kits sold several years ago. These were from TSMG's left in Stuart Light Tanks that the USA gave to Russia at the conclusion of WW2. Since the Russians didn't use 45ACP they stored these in a cave until the 2000's and sold them. USPS MO or paypal is OK. If you do paypal I'll send you an invoice. If you go ahead and pay me with paypal and gun words I'll ban your ass and never do business with you again.
  8. Tapco AR-15 Stripped Lower Receiver [KM] Price: $59.99 Tapco AR-15 Stripped Lower Receiver Forged 7075 T-6 Aluminum Hard Cote Black Matte Finish Multi-Caliber Stripped Lower Receiver Attention! By Federal law, we can only ship firearms to an FFL licensed gun dealer Check all local laws and regulations before purchasing When purchasing a firearm Email a copy of your FFL with ORDER NUMBER to ffl@copesdistributing.com or fax a copy to 937 459 5434 At this time, we will not be shipping this product to the states of NY, CT, NJ or CA. $9.95 Flat Rate Shipping for as many items as you would like to order. This includes firearms, ammo, and all other products. TO ORDER: click the direct link: http://www.copesdistributing.com/tapco-stripped-lower-receiver-p-8589.htmlor call 866-523-2673 M-Sat 9A-5P EST
  9. I'm looking to buy demilled G36 receiver sections for a build. The longer the pieces, the better. I'm looking for front, center, and rear sections. The front and middle sections are normally disposed of as they typically are not used in builds. sweersalex@yahoo.com Thank you!
  10. We have for sale Full Size, Mini & Micro Uzi repair section 89.95. This is the best Uzi receiver repair section on the market. Build a dummy gun, a legal semi-auto, or if you have an 07/SOT you can build a legal post sample. No machining required, just grind and fit your front and rear section smooth and weld together(or cut repair section to proper length to fit your front and rear section). For legal semi auto a blocking bar must be welded in. This is not a receiver until front and rear sections are welded and no FFL is required. Please study all BATF and NFA rules before purchasing. These are in the white and may show some oxidation. These are approved by the BATFE as non-receivers. We sell the (Weld in parts) and cut receiver sections. FULL SIZE UZI 89.95 http://shop-usbarrelshrouds-com.3dcartstores.com/Uzi-Repair-Section-_p_210.html MINI UZI 89.95 http://shop-usbarrelshrouds-com.3dcartstores.com/Mini-Uzi-Repair-Section-_p_212.html MICRO/PISTOL UZI 89.95 http://shop-usbarrelshrouds-com.3dcartstores.com/Micro-Pistol-Uzi-Repair-Section-_p_213.html WELD IN PARTS http://shop-usbarrelshrouds-com.3dcartstores.com/Weld-Up-Parts_c_18.html CUT RECEIVER 63.00 http://shop-usbarrelshrouds-com.3dcartstores.com/Uzi-Cut-Receiver-_p_153.html Thank you for the board Buddy!!
  11. Gewehr Werks will be continuing our Blowout sale on G3/91 Receivers until 01/01/2016 or until we are sold out (we are not sold out as of 01/25/2016). We have had an overwhelming response and remaining stock is very limited. This sale will be ending very soon, and this is the last of the last. I cannot stress enough that the end is near, so if you intend to purchase one of these receivers, NOW IS THE TIME TO ACT! These receivers are a direct replacement for the G3 / HK91 / CETME style rifles. These receivers are the early German Military style profile. This early style profile was used by the German Bundeswehr and Portuguese Armed Forces. These receivers have been rolled, stenciled and serialized. This product is targeted towards the home builder; and manufacturers who don't have the tooling to reliably roll a flat. These parts were produced on original HK stamping dies, not on an aftermarket bending jig. Gewehr Werks has duplicated the nomenclature found on these early receivers. No welding has been done, no weldments are included. We have built a 100 rifles with these receivers and no issues, Actual product is pictured below. NOTE these receivers now accept collapsible stocks, without any modification. We must stress that these parts have been produced using a 500 ton MINSTER press and German stamping dies! This is the last time these early style receivers will be offered by Gewehr Werks, when these are gone that’s it! The quantity is limited, only 100 units were originally being offered at this blowout sale price. We are offering these parts at cost, at rock bottom, at 70% the cost of a flat. The price is $50.00 plus $15.00 shipping! NOTE: These are an FFL item, must be shipped to a FFL dealer If you are interested in purchasing a receiver you can email us at gewehrwerks@earthlink.net or call us at 937-667-4605 Feel free to visit our website: GewehrWerks.com Also G3/HK91 factory German kits are still available and on sale for $599 through HKPARTS.NET These kits come with a NEW CHF (Cold Hammer Forged) barrel manufactured by RCM, here is the link to the actual ad: http://www.hkparts.net/shop/pc/HK-G3-HK-91-PTR-Parts-Kit-CHF-Barrel-ON-SALE-126p16573.htm