Search the Community

Showing results for tags 'mini'.

Found 4 results

  1. High End Armament Technology Inc in Tulsa Oklahoma has a large assortment of some of the absolute best transferable machine guns available on the market today. HEAT INC, is an 07/SOT that specializes in NFA, Night Vision, Thermal Imaging, Optio-Electronics. All guns are zero round count since being manufactured or reworked by Mike at TSC, Ralph at RDTS, etc. All are new or like new and many come upgraded with some of the best accessories you can get. The best part, they are ready to E-Form today!! Let's start off with some of the following HK and UZI sub guns.... These host guns are all decked out. Turn key, ready to shoot, enjoy, or just collect. Registered Receiver MP5-SD2 by Pearl Manufacturing. Double Push Pin, Burst Lower KAC NAVY SD Suppressor. 47.5K Registered Receiver MP5(F) by Ballistics Inc. Double Push Pin, Burst Lower. 39K Registered Receiver MP5K by Fleming Firearms. Double Push Pin, Burst Lower. 39K RDTS MK5K-SD built off of factory new SP89. Includes RDTS MP5K-SD Suppressor and Non-Suppressed Sleeve. Burst Lower with S&H Sear. 43K S&H MP5SDA3 built using a HK94, S&H SD Suppressor, and Fleming Sear in a Burst Lower. 43K HK MP5K PDW on new SP89 built using all German Parts. Qualified Sear in Burst Lower. 39K HK MP5K PDW on new SP89 built using all German Parts. Fleming Sear in Burst Lower. 39K HK MP5K PDW Reverse Stretch on new SP89 built using all German Parts. TSC installed S&H Sear in a Burst Lower. 39K HK MP5A3 (F) RDTS Built from HK94 using a registered Lafrance SEF Trigger Frame. Factory German 3 Lug/Threaded Barrel. Vented Hand Guard. 39K Action Arms Micro Uzi marked Pistol with a LaFrance Registered Micro Bolt, Angled Trigger Guard, Rubber Coated Correct Micro Stock. 25K Vector Mini Uzi RR 19.5K Action Arms Mini Uzi with Group Industries Bolt installed. 19K Full Size Action Arms LTD Uzi with a Fleming Firearms Sear Installed. 15.5K On to the "long" guns.. Colt Registered Receiver M16 14.5" barrel. Gun was professionally refinished. Unfired Since. Had low round count to start. 27.5K Micro Galil on Action Arms Galil using a Qualified Manufacturing Sear. New Micro Galil parts used on the conversion. 35K Norico 56S with Qualified Manufacturing Sear. A near perfect Bin Laden Clone. Krinkov to the extreme! 37.5K Micro Galil Nickel Coated. Registered Receiver by Qualified Manufacturing on a Magnum Research receiver. 35K And some other things that may interest you... Stemple/High Standard M2HB with quick change barrel kit. Extra QC Barrel, Go/No-Go, Mount, Hardigg Deployment Case. 55K SACO Defense/Maremount M60E6. This one is special. One of the very few transferable M60"E3" marked trunions. Fully upgraded at US Ordnance to a Danish Style E6 Kit. Heavy Fluted Barrel. US Ord. Shipping Box, Spare Fluted Heavy Barrel as well. 80K Pics below are some of the listed items... Detailed pics available or see www.highendarms.com/machineguns for more info. Contact: sales@highendarms.com for purchase 1.918.505.GUNS (4867)
  2. WTS: MINI UZI Pre-86 Dealer Sample $8750

    In stock, on a F3, nice clean Mini, especially the internals. Comes with one magazine. We use eForms for the quickest transfers and keep the customer informed every step of the process. Price includes Priority Mail shipping with a Tracking #
  3. SOLD AS A SET ONLY! $2500 Total FAMILY:IC Series • MODEL:IC-PDW SBR • TYPE:NFA - Short Barrel Rifle • ACTION:Semi-Auto • FINISH:OD Green • STOCK/FRAME:Collapsible / Folding Stock • STOCK/GRIPS:LWRC PDW 2-Position Adj. Stock • SPC FEATURE:Threaded Barrel Model • THREAD PATTERN:1/2-28 • CALIBER/GAUGE:223 Rem | 5.56 NATO • CAPACITY:30+1 • # OF MAGS:1 • MAGAZINE DESC:30 rd. • BARREL:8.5" • OVERALL LENGTH:25.00" • RATE-OF-TWIST:1-in-7" RH • CAN DISASSEMBLE:No • SIGHTS:LWRC Flip-Up Skirmish Sights • ADDL INFO:Patented Short Stroke Piston • ADDL INFO:Modular Railskins w/Hand Stop • ADDL INFO:LWRCI Modular 7" Rail System SOCOM Series Sound Suppressor (Silencer) Specifications Caliber 5.56 mm (.223 caliber) Length 5.3 inches Weight 14.6 ounces Diameter 1.5 inches Description SOCOM556-MINI MONSTER OPEN BOX, NEVER USED The SOCOM556-MINI MONSTER Fast-Attach® suppressor is identical to our SOCOM556-MINI suppressor, but has serrated teeth on the front plate for added bite if the situation demands it. The MINI and MINI MONSTER are both shorter, lighter versions of SureFire’s SOCOM556-RC, which was selected for the M4 and Mk18 carbines by US Special Operations Command after placing first in the most extensive and rigorous suppressor testing ever conducted, and which also received the USSOCOM official safety verification in support of fielding. With an overall length of just 5.3 inches, the SOCOM556-MINI MONSTER is extremely compact and lightweight. It features advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the operator. The new design also includes an integrated blast shield in the back section that increases durability. SureFire’s patent-pending front-plate design, along with proprietary improvements in gas-flow dynamics, nearly eliminates first-round flash, a true technological breakthrough in this area. It also attenuates noise and dust signatures to an unprecedented degree. A new indexing system means it mounts to a SureFire muzzle brake or flash hider even more solidly than our previous models and is easier to remove after extended firing since the index tab is in a low carbon-buildup area. Like all SureFire Fast-Attach models, the SOCOM556-MINI MONSTER produces minimal, consistent shift in point of impact compared with the unsuppressed weapon regardless of the number of attach-detach cycles. The SOCOM556-MINI MONSTER is constructed from advanced US mill-certified high-temperature alloys and heat-treated stainless steel, and features a tough, corrosion-resistant Ionbond coating on the Fast-Attach® lock ring and Cerakote™ ceramic finish on the suppressor body, in either Black or Dark Earth color. All SureFire SOCOM Series suppressors require a compatible, latest-model SureFire muzzle brake/adapter or flash hider/adapter for attachment to a firearm—see Parts and Accessories on this page. SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use. In fact, your SureFire suppressor should outlast your firearm barrel, depending on use. All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they reduce the weapon’s sound signature, concealing operator's position and protecting both the operator and team members against both permanent and temporary hearing loss, while enhancing situational awareness and communication; reduce or virtually eliminate muzzle flash, concealing operator's position and preserving night vision and unobstructed view; reduce dust signature, concealing operator’s position and maintaining unobstructed view; and reduce recoil, improving bullet impact observation and allowing for faster follow-up shots. NOTE: SureFire SOCOM Series Fast-Attach sound suppressors, muzzle brake/suppressor adapters, and flash hider/suppressor adapters are not compatible with previous generation SureFire Fast-Attach sound suppressors, muzzle brakes, or flash hiders. Features • Patented Fast-Attach® design provides rock-solid attachment and easy removal in seconds • Identical to the SureFire SOCOM556-MINI, but with serrated teeth on the front plate • Same revolutionary suppressor technology as SureFire’s SOCOM556-RC, winner of US Special Operations Command (USSOCOM) extensive and rigorous suppressor trials • Provides effective attenuation of sound and dust signatures • Minimal, consistent point-of-impact shift compared with unsuppressed weapon regardless of number of attach-detach cycles • Compact and lightweight for minimum overall weapon length and minimum impact on handling characteristics • Advanced core design to reduce back pressure, cyclic rate, and gas blowback • Patent-pending front-plate design and proprietary gas-flow improvements virtually eliminate first-round flash • Integrated blast shield increases durability • Constructed of advanced US mill-certified high-temperature alloys and stainless steel • Redundant-welded subcomponents eliminate parts loosening Tough, corrosion-resistant Ionbond and Cerakote™ finish in Black or Dark Earth color This will have to be shipped to a class 3 dealer if not in the state of Texas. Buyer pays all shipping costs. Bought as is: No Returns
  4. This gun comes with the box and only has had 40 rounds fired. Looks new, and pretty much is. Stainless steel, with black polymer stock. Weatherproof setup great for humid areas. No damage, no problems. Has the factory 5 round magazines included and stainless scope rings. Factory box included. Can send pics.