Search the Community

Showing results for tags 'mac10'.

Found 22 results

  1. WTB MAC-10 Upper

    Want to Buy a MAC upper barrel assembly for my refurbish project made by either Powder Springs, Marietta GA, or an early RPB. I have some rare MAC Walther MP9 mags and MAC accessories for trading or I can do money order or PayPal. Please only Profile Message me as I do not read posts.
  2. Powder Springs Mac 10

    Powder Springs Mac 10 Great condition early manufacture Powder Springs Mac 10 in 45acp. $7,500. 1972 manufacture. Three original Mac mags, large vented barrel shroud, wire stock, front strap and hanger, Mac mag loader, cleaning rod and instruction manual. Runs great. Looks great. Plenty of references available. PM me for pics, videos, proof of life, etc. On Form 4 in KY.
  3. The SWD M-11 includes one box, a manual, strap, cleaning rod, high cap magazine and magazine loader. Package also includes an original MAC (M-10) 9mm suppressor made by Military Armament Corp from Atlanta, GA. This is a full size M10 factory suppressor in excellent condition with wipes that look brand new. Will transfer on Form 3. Firearm and suppressor will be transferred on form 3e-form to a C-3 dealer. Price - $6995 plus $150 Fedex priority overnight shipping & insurance. Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant.
  4. NIB MAC-10 Powder Springs Parts Set

    NEW IN BOX, MINT MAC-10 POWDER SPRINGS PARTS SET 9MM - $ 3100.00 Transform your worn-out MAC into a blue-chip investment grade piece with this fantastically mint parts set. This parts set has been a safe queen for 40 plus years. Everything looks crisp, vibrant, and like it was made yesterday. This is about as rare as it gets. This parts set will fit your Powder Springs and early RPB MAC receivers. Newer MAC receivers may require minor gunsmith work. You should plan to have a gunsmith replace out all parts. No receiver included with parts set. Parts set will only work with NFA registered receivers. Parts set is totally complete, mint, and unused. All of these parts pictured were produced in the early 70’s. Powder Springs MAC’s are superior over later models because of the very expensive high temperature heat treating process given to the metal, making them more reliable and lasting longer. This was only done in the early 70’s for potential military contracts. Parts Set comes with one Powder Springs Walther MP9 mag. For an extra charge, I have 3 extra mags available. These are original MAC 9mm magazines from Powder Springs. Extremely hard to find. The original MAC Walther MP9 magazines retail on other sites for $250 each. Unlike later MAC magazines, original early 70’s production mags guarantee flawless feeding and functioning. Magazines shows slight wear to finish and are like new. CONTACT AND SHIPPING I will be happy to answer any questions and email more detailed pictures. ONLY use the profile message system for contact. DO NOT REPLY IN POSTS. Shipping for Powder Springs parts set is 85.00, which includes insurance, tracking, signature confirmation, and extra material for careful packing.
  5. I have a Transferable M101A1 in great condition with a folding stock. Comes with a Bowers CAC45 suppressor. Both items are on Form3's located in Louisiana. What you see is what you get, as is. $6,500.00 Plus actual shipping and Insurance.
  6. Hello fellow enthusiasts, I have 10 USGI Grease Gun Magazines for sale. They are 30 rounders I believe, 8 are: SPW GL C-153427 & 2 are: KL GL C153427 Obviously USGI Surplus Mags about 3 or 4 have pitting I think only 2 have large areas of it. 4 or 5 have one or two at most each, tiny dings in the sides and all have minor scratches. Couple of the pics the mags will look crappy because the grease had not been removed. I am trying to describe best I can so no one is dis illusioned thinking they are getting NEW Mags. You will NOT get new mags! As all you guys should know, these are THICK solid Mags. So any of the cosmetics will not have ANY effect on function. Which means they should all function as well as new ones. There is ONE that has rust on the top end and follower. So you will have to clean up, ( Sand), the follower and top end of the mag, before you can use it. Now, I only took the baseplate off of one. But inside it did look brand new! I need to get $20 each so that would be $200 for the lot plus $25 for Priority Mail Shipping!
  7. never fired Military Armament Corporation asking $6800 New, never fired, no box. Form 4 Tony call or text 443-201-3088
  8. This is an original MAC-10 9mm suppressor made by the original manufacturer, Military Armament Corp, Powder Springs, GA. It does not appear to have been shot. Will transfer on an ATF e-form 3 to class III dealer. Fully transferable. Buyer pays $35 FedEx priority shipping and insurance. Asking $495 Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant. Norrell321
  9. WTS 2 Mac 10's. each comes with 1 mag. The first is a RPB Overstamp Powder Springs gun. This has an enlarged rear site hole for use with a sling (sling not included or available). New barrel has been installed on this gun. The second is a Powder Springs factory gun that is in excellent condition. It appears to have been shot very little. Both guns were test fired by me and do run. I will sell both guns as a package deal or seperate. Price: RPB Overstamp $6500.00 Powder Springs gun $7400.00 I will sell both guns together as a package for $13,500.00 OBO cash shipped and insured to your dealer. Payment via USPS Money Orders or Wire Transfer to my bank. I am an FFL/SOT so these will E-File transfer to your FFL/SOT or if you are a Kentucky resident I can transfer the guns directly to you on a form 4. Kentucky buyers subject to 6% Kentucky sales tax. Both guns are in my business inventory and are ready for inspection by appointment. 100% payment due up front before I start transfer. If you have any questions feel free to give me a call or shoot me an email. Viking Arms - Charles Cox FFL/SOT 8112 US Route 60 Unit J Ashland, KY. 41102 Cell 606-922-8954 Email:
  10. As my friend Tom would say, the Mac 10 in 45 is one bad hombre!. Comes with an AWC suppressor and two greasegun mags. Perfect host gun to run in 9mm with a Lage Max 31 or blast away in 223 with one of upcoming tenko adapters. Both the machinegun and suppressor are on form 3 at my local dealer here in Florida. So quick free transfer if your out of state. $6500 All NFA rules apply. Beau 410-693-3036
  11. Unfired Military Armament Corporation out of Powder Springs, GA chambered in .45acp. Comes with one magazine and original box. Buyer responsible for shipping and stamps.
  12. Power Springs, Mac 10 for sale, on form 3 Cal 45ACP. With all accessories show: EXCEPT: No suppressor, and only 1 magazine $7000 shipped, if purchased by Dec 16 Price goes down $100 per week: Dec 23 $6900 Dec 30 $6800 Jan 6 2019 $6700 Jan 13 $6600 Jan 20 $6500 Jan 27 $6400 Feb 3 $6300 Feb 10 $6200 .
  13. I have a great condition transferable Powder Springs M10 in 45acp on a Form 3 here in Colorado. This gun come with a Lage Manufacturing Max-10 Upper. We will ship to your FFL/SOT. $ 10,500
  14. 1. LAGE MAX31, 9mm upper receiver /slow fire bolt package. Gen 1, fits Mac11/9mm, barely used, excellent condition, includes U.S. Machinegun Billet left folding stock, 5/72 rd suomi drum mags, 2/50 rd coffin mags, coffin mag loader, 2 piece LAGE grip, new vertical grip/ collapsible bipod,and manual. One coffin mag has a small hole drilled on one side, don't know why it was drilled, but it doesn't ruin the function of the mag. I am not breaking up the package. Because of the Hi cap mags I cant sell to CT,NY,NJ,MA unless your FLL or LEO. Looking for $1200, cash, USPS money order, or discrete PayPal +3% Shipping will be $20. Message me directly 2. LAGE MAX 10/45 upper receiver w/slow fire bolt package. Gen1 fits Mac10/.45 Used complete upper with all hardware and manual. The original front molded grip separated between the botton and front piece but was repaired with epoxy. Purchased a new K-grip from LAGE. Includes left folding LAGE stock, LAGE 2-piece molded grip w/thumb mag release, 4 different lower thumb mag release levers, and front vertical grip mono pod. Looking for $900. Shipping is $20. Cash, USPS money order, or discrete Paypal +3% message me directly
  15. A total of four USGI NIW grease gun mags for your consideration. Two were removed from the sealed wrap, but are still wrapped in the grease paper. I peeked in the top and those two are nicely blued. All mags came from the same lot, so all four should be blued. New USGI mags are becoming increasingly difficult to find. $160 for all four magazines delivered where allowed. Shipping via USPS Priority Mail is included with the price. Checks, Credit cards ok. Questions? 702-763-1269 after 8:00AM Pacific time. Email to
  16. The B&T USA / Brugger and Thomet KH9 was made in Switzerland and designed by Karl Brugger as Karl's Hobby 9mm which is a modernized Italian Sites Spectre M4 double/single action submachinegun with several design improvements. The KH9 has the option of feeding from either standard B&T magazines interchangeable with all of their firearms or includes a Finnish Soumi KP31/M31 magazine adapter to use coffin magazines. The recoil-springs operate on twin guides as opposed to the Spectre which is free floated and prone to binding. Receiver is a monolithic SCAR-type with quadrail and taken from the B&T GHM9. Barrel has an HK three-lug adapter. Controls are completely ambidextrous with magazine release and decocker on both sides. Charging handle was inspired by the Ingram M10 or IMI/IWI UZI, Pistol grip was based on the SIG SG550/STGW90, and the rear trunnion uses standard B&T MP9/TP9 stock/brace assemblies. Package includes hardcase, Soumi coffin magazine adapter, front/rear flip-up sights, two 30 round magazines, cleaning kit, manual, and hard-case. Photo is representative of another of my B&T KH9 examples. The firearm you will be receiving has not been fondled or touched. Made in Switzerland, this is 1 of 400 imported. Once gone, these will not be seen again. $2000 shipped.
  17. MAC RPB 10-A1 9mm Original Lage Grip and stock

    Selling to fund another MG. Beautiful all original Military Armament Corp, Marietta, GA overstamp RPB Industries, Inc MAC M10-A1 9mm sub machine gun. I've had this gun since 2012 and can count on one hand how many times I've shot it. Runs flawlessly. Original upper, hand strap, manual and soft case. Comes with three mag's. Once in exceptional condition, the other two work but have been painted by a previous owner (these were bought after this gun was purchased). It has a Lage grip (I also have the original that comes with it), AR-15 style stock (no modifications to the receiver whatsoever) and adjustable stock. I will also include the original wire stock. I also have a Lage upper that I would sell separately if the buyer or anyone else is interested. $7,200 plus shipping on form 3 ready for immediate transfer. IMG_0189 by Davy Keith, on Flickr IMG_0188 by Davy Keith, on FlickrIMG_0187 by Davy Keith, on FlickrIMG_0186 by Davy Keith, on FlickrIMG_0185 by Davy Keith, on FlickrIMG_0184 by Davy Keith, on FlickrIMG_0183 by Davy Keith, on FlickrIMG_0182 by Davy Keith, on FlickrIMG_0181 by Davy Keith, on FlickrIMG_0178 by Davy Keith, on FlickrIMG_0177 by Davy Keith, on FlickrIMG_0176 by Davy Keith, on FlickrIMG_0175 by Davy Keith, on FlickrIMG_0174 by Davy Keith, on FlickrIMG_0173 by Davy Keith, on FlickrIMG_0171 by Davy Keith, on Flickr
  18. Excellent condition Powder Springs M10/9mm, with Matching numbers Suppressor! Gun is on a Form 4 in Kentucky If you're out of state, I pay the first stamp for both the gun and suppressor! Only around 500 rounds through the gun since new. The gun is in fantastic condition; as you can see in the photos, external finish is 95% or better. Internally the gun is also in excellent condition; the bore looks like-new, fire control group parts look nearly new, bolt looks lightly used/near new, etc. The matching numbers suppressor utilizes a "Wipe" type design, and the end cap wipe appears to be new (see photos). We have not fired the gun with this suppressor installed. The external finish on the can shows either a paint run or some damage from a solvent (visible as a run in the photos). Gun will ship with one original magazine (Pictured) Payment: Half of sale price is due within within 10 business days of auction end, with the balance due upon shipping to your SOT. Shipping: Buyer pays shipping costs, USPS Registered mail insured for the full value of the firearm and accessors Buyer has the option to purchase a Coastal Guns M10/9mm suppressor with the gun for $200 extra; you'll need to pay both tax stamps on that one. Reasonable offers welcomed! I'm new to this forum but have a well established buying and selling history elsewhere, including NFA items. My username on Gunbroker, FalFiles, AKfiles, and are all the same as my username here.
  19. Very nice MAC10 9mm manufactured by Military Armament Corp Model M10A1A Submachinegun. Also included is a excellent condition complete 45 ACP parts kit. $6200 I tax paid to you or your dealer. Call or text 912-270-5788
  20. The major drawback of the SWD M-11/9 has always been it's very high rate of fire. It's little more than a bullet hose in OEM form. Over the years, various methods have been employed to reduce the ROF. These have ranged from dismal to very good. Unfortunately, rate of fire reduction has come at the expense of overall size... until now. The CF-W bolts are manufactured from heavy Tungsten alloy. While very close to the density of pure tungsten, heavy alloy provides a unique combination of corrosion resistance, density, mechanical strength, and machinability. This increases the bolt's original weight of 15.88 ounces up to 32 ounces, and reduces the ROF by over half. Easy singles are now possible while retaining the gun's original compact size.The reviews of the first run of 100 have been very positive and they sold out quickly. bolts are delivered pre-assembled and ready to drop into your OEM upper or side cocker. Cost for a completely assembled CF-W bolt is $750.00. We now offer $9.99 USPS Priority Mail shipping! Your package is fully insured, so an adult signature is required at time of delivery. Credit cards are cheerfully accepted but their use will add a 3.5% up charge.To order, please call 1-702-763-1269 from 9:00AM to 6:00PM Pacific Time, Monday through Saturday. For additional information please email Sorry, no Nevada sales at this time. We have every part needed for an OEM style bolt. These are in stock and ship via Priority Mail for a flat $3.00 charge.*Extra polyurethane buffers are available for $4.50 each. *I'd strongly suggest the purchase of an extra ejector rod for $11.00.*Recoil spring guide rods are available for $10.00 each. *Spare recoil springs $7.50 each. Two recoils springs, $13.25. *I have a few NOS original "hockey puck" style cocking knobs at $15.00 each. *Enhanced extractors are $9.50, extractor spring is $4.50. *OEM style firing pins, $20.00*Firing pin retainers $9.00.*Extractor roll pins, 2 for $2.00.*Recoil/back plates $7.50. Go from this... To this! *A 9mm CF-W bolt for the SWD M-11A1 .380acp buzz guns is now being sold. The future is tungsten!
  21. I have an Ingram M10 sub-machine gun for sale. It has full-auto and safe functions enabled. It originally came with an A1 stock and an M4 style hand guard. I installed a Lage slow-fire upper and a Lage folding stock. This comes with everything you see in the photos (except the optic), the original upper, stock, six steel magazines, the Lage upper and folding stock. It's currently on a Form 4 and is personally registered to me. I'm also an FFL/SOT, so I'll gladly transfer it to your FFL/SOT. Buyer pays ALL transfer fees and taxes. It's very clean and has always functioned well. I'll remove the inexpensive optic before shipping. $8,800 Bob Margolis or (860)778-1212
  22. We are selling a MAC10 machine gun, select fire, .45 ACP & 9MM that is registered in both calibers. This is a Model Ingram M10A1A, cal 9MM, .45 ACP, Military Armament Corp., Stephensville, TX, Lingleville, TX. Included in this package is an M-10 Suppressor with a Nomex sleeve. This is a .45 cal suppressor made by John Norrell Arms in 1995. The suppressor has been shot a bit and the buyer should plan to disassemble and clean it. This firearm has not been test-fired and will be purchased as is. There is an abundance of accessories that comes in this package. We are including: 1 mag adapter, 16- .45 30 round mags, 2 hi-cap 40 or 50 rd .45 mags, 10 modified Sten mags, 2 hi-cap 40 rd modified Sten mags, lots of small parts, extra upper receiversin 9mm and .45, a barrel removal tool, a magwell adapter to shoot 9MM, an original Cobray carry bag. We are asking $7000, plus actual shipping cost with insurance. Fully transferable, but we will ship to FFL only. This will be coming from John Norrell, Inc, Continental U.S. only.