Search the Community

Showing results for tags 'm60e3'.

Found 10 results

  1. I have a nice hardly used VERY scarce to say the least, SACO built M60 Complete rear channel with bridge and all factory riveted and ready for a trunnion to build a post sample or rebuild a transferable M60. Incredible spare part for a rebuild now or in the future!! Has side mount factory holes on left side for mounting the feed tray bracket E3 stock and cocking handle parts not included but available, also have E3 grip/forend available 1650.00 plus shipping 828-773-1938 Email directly please GPrue8@aol.com
  2. M60 E3-E6 Commando Barrels Used depending on condition 1200.00 plus New in Wrap E3-E6 1200.00-2k New In Wrap Heavy Fluted 1800.00 Thanks Again, Chris Soles KJS Tactical Arms LLC 803-728-5484 We have a ton of other M60 parts in stock.
  3. WTS: M60e3 Bipods - NOS

    Gentlemen, I have 4-5 NOS M60e3 Bi-pods for sale. Immaculate condition just as they were when they left the Saco Defense Assembly line in the 1980s....These have always been the hardest part to find for the M60e3. I came across these and to be honest, they are likely the last that we will come across that are sold outside of a complete kit. Have just about everything in stock for the M60 if there is anything else you are looking for. We also accept credit cards. $450 each Aaron - Mohnton, Pa
  4. I have gotten quite a few questions regarding how to build a Predator Pack for an M60. That being said, I made a detailed video on how to build them in an effort to help people out. The video goes over each component you will need and then how to assemble. Hope this is helpful. Any questions, please ask. I have some of the components for sale, but no boxes or chute. Aaron - Mohnton, Pa M60.MachineGun@Aol.com
  5. Gentlemen, I have for sale some USGI M60 Channels. These are heat treated and ready to go. Any questions please ask. $250 each Aaron - Mohnton, Pa Sales@BeltFeds.Com
  6. Gentlemen, I have a good amount of M60 feed chute mounting plates for sale. These plates are a necessary part in order to use feed chute with your gun. $55 each Pictures below. Any questions please ask. Aaron - Mohnton, Pa Sales@BeltFeds.Com
  7. Gentlemen, I have for sale several more M60e3 Conversion Kits This is a USGI Surplus kit. Everything is in excellent condition.. Most parts are NOS and some have light use. Barrel is dated 1988... What you see pictured in the respective kits is what you will receive. I will send additional detailed photos upon request.This kit does not include an ammo hanger. These M60e3 kits are near impossible to find anymore.. The US Marine Corps and US Navy adopted the M60e3 in 1985. They were in service for around 10 years so the amount of parts out there is very limited. Even standard parts are drying up and they were in service for over 40 years ..Prices and Pictures below.... ** For information on the M60e3 kit and how to assemble it please visit my YouTube Channel here---> https://www.youtube.com/watch?v=2Kl_C7s2V18 Thanks, Aaron - Mohnton, Pa Sales@BeltFeds.Com - Long barrel kit- $4,200 - Commando Barrel Kit - $4,500 **BELOW PICTURES ARE FOR REFERENCE ONLY TO SHOW WHAT THE M60E3 LOOKS LIKE ASSEMBLED **
  8. Gentlemen, I still have some M60e3 Assault Boxes available. These boxes were made by Capco (Capawanna Company Las Vegas, NV), which began production in 1985. They are a hard plastic and will attach to the M60 standard, e3 , e4, or e6 feed hangers. They hold 100 Rounds of Linked ammo. Approximately 1,400 of these boxes were produced by Capco. They came out around the same time that the US Military was adopting the M240 and never secured a military contract. So they never went into mass production. They were featured in a May 1989 article of Soldier of Fortune which I have posted below. These have not been available for quite some time..... I have posted a video here to give a better review of these boxes --> https://www.youtube.com/watch?v=l6tTOUwYULU Soldier of Fortune Article ----> http://www.combatreform.org/pab.htm Boxes are $75 each....... All boxes will ship USPS Priority Mail. 4 Boxes fit in medium flat rate, 5 boxes fit in large flat rate. Buyer pays actual shipping. Aaron in Mohnton, Pa Sales@BeltFeds.Com
  9. WTB: M60e3 Forward Pistol Grips -Pic

    Gentlemen, . Looking for an M60e3 forward pistol grip. Preferably complete...will buy as many as you have for sale.. I have posted a picture below for all you guys that have these and don't know what they are.... Always looking to trade as well...have lots of M60 Parts. Aaron - Mohnton, Pa M60.MachineGun@aol.com
  10. Gentlemen, I have for sale TWO M60e3 conversion kits. For those of you who are not aware, these kits will convert your standard M60 into an M60e3. These kits were produced by Saco Defense. Individual kit conditions listed below with pictures. The kits pictured is what you will actually receive. I will send close up individuals photos of each component to serious buyers. **Any questions, Please Ask Thanks, Aaron - Mohnton, Pa - M60.MachineGun@Aol.Com KIT 1 - Used and in excellent condition. What you see in the photographs is what you will receive. Topcover is complete. $3,850 ** SPF SPF ** KIT 2 - I believe everything in this kit is NOS. It comes with a New / Never in a gun Commando barrel. What you see pictured is what you will receive. $4,500 SOLD SOLD SOLD **BELOW PICTURES ARE FOR REFERENCE ONLY TO SHOW WHAT THE M60E3 LOOKS LIKE ASSEMBLED**