Search the Community

Looking for a M3A1 Grease Gun Pre Sample....Ready for eform 3.

WTS: M3 Grease Gun Magazines W/ Pouch - Excellent 6 total mags. These are in nearly new condition with some light rub marks / storage wear. They may have had a few rounds through them but it doesn’t show. A lightly used Korean War era shoulder pouch will be included. Perfect for display / use. Price: $220 Payment: Paypal gift / friends & family, Venmo, USPS Money Order, Check Shipping: Actual Cost Contact: PM or email at bevisblack15NOSPAM@yahoo.com (remove NOSPAM)

Lowered price and includes shipping $230. M3 Buffalo Arms WWII bolt. Stamped on rear ' 10-44 '. If interested,PM me for more pics or question. Thanks

Colt M3 M2 .50 caliber M2HB Springfield Browning This is a Colt manufactured M3 .50 cal model that is a Colt factory original M2 receiver. This is not a side plate receiver but original Colt factory complete M3/M2 firearm and it is fully transferable. It is marked "Manufactured by Colt M3 A.C. Basic" (see pictures) and is a Colt M2 receiver and parts so the cyclic rate is that of a M2 at approximately 600 rpm. Colt and Springfield worked together starting in 1937 to develop a faster shooting M2 they would call later a M3 to be used as an anti-aircraft machine gun. This firearm also has not been shot very much and may have only been test fired from looking at the internal parts and areas of the firearm. We test fired and it shot perfectly. Firearm comes with a M1919 .30 cal. bipod. We can provide more close-up pics as needed. Just describe to us what area of the firearm you want to see photos. Buyer pays actual shipping and insurance. Ready to transfer on a e-form 3. Asking $65,000 Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. We will not ship to Alaska, Hawaii or outside the US. All NFA rules apply. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money order payable to JOHN NORRELL, INC. Firearm will be shipped when payment clears the bank and the ATF eform transfer has completed. Should the bank put a hold on funds, the firearm will be held until that hold clears. Buyer will have 5 days to inspect firearm upon receipt by the FFL holder. Any issues or questions should be addressed during that time. This item is listed by, and the website and postings are monitored by Ann Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant. Stock no. N-1182

FOR SALE are six 30rd Grease Gun mags. Yes, they are not the prettiest girls on the block, but they perform. The price is $30 each + shipping cost. I can ship 1 to 6 mags for $15. Please post here how many you want and email me at 458socom@comcast.net for more info. Thanks, Dan

M10 Trigger Charging cable - I picked up this new in the package with USGI original part numbers etc in a parts lot some time ago. I was recently sorting through my collection of 50 items and wanted to see if anyone needs one. Please email or PM for quick response. Asking $25 shipped

Up for sale is a like new GG bolt M3a1, “FOUR” sets of GI Grease gun Drive springs and extractor drive tool. Springs and tool are all NOS!!!!! $250 for all shipped. Will not split.

Two new M3 Grease Gun Cocking Assy's that are still new in the cosmoline. After spending 1.5 hrs trying to remove the 50 yr old wax paper and Cosmoline I can see some discoloration. Still didn't try to remove all the Cosmoline from the insides of cocking assemblies. I took ten more pics showing w/o Cosmoline. You can see discoloration on one side and under one assembly. This is the best I can represent these. One (1) shipped for $130 or buy both shipped for $240. Thanks, Dave

Used 37mm AT gun barrel for MV project wanted. Condition of rifllng not to important, need sto ahve reasonable chamber or repairable. - main gun will likely never be shot. Dummy barrel not of interest. Cannon propellant for trade or cahs for trade.

SOLD For sale an M3A1 greasegun parts kit. Excellent condition Includes all parts except one sling loop. magazine catch shield is not shown, but is included. Thanks for looking, James

Hello fellow enthusiasts, I have 10 USGI Grease Gun Magazines for sale. They are 30 rounders I believe, 8 are: SPW GL C-153427 & 2 are: KL GL C153427 Obviously USGI Surplus Mags about 3 or 4 have pitting I think only 2 have large areas of it. 4 or 5 have one or two at most each, tiny dings in the sides and all have minor scratches. Couple of the pics the mags will look crappy because the grease had not been removed. I am trying to describe best I can so no one is dis illusioned thinking they are getting NEW Mags. You will NOT get new mags! As all you guys should know, these are THICK solid Mags. So any of the cosmetics will not have ANY effect on function. Which means they should all function as well as new ones. There is ONE that has rust on the top end and follower. So you will have to clean up, ( Sand), the follower and top end of the mag, before you can use it. Now, I only took the baseplate off of one. But inside it did look brand new! I need to get $20 each so that would be $200 for the lot plus $25 for Priority Mail Shipping!

Guide Lamp M3 Grease Gun pre-may dealer sample. I never fired it. The dealer I bought it from said he never fired it and that was the same thing the person he bought it from stated. Whether it has or has not, I can't be certain but I am certain this is likely the finest example with an original finish outside of a museum. Excellent, mint like new with only a few small handling marks. $11,500 plus shipping. Trade interests. Any transferable machine guns. Terms This weapon is only available to current FFL/SOT holders. This is not a restricted sample that requires a LEO demo letter. It is a pre May sales sample that any FFL/SOT holder can retain ownership of after you surrender or let your SOT go. I will accept half down and half due upon BATFE approval but full payment required before shipment. Business or personal checks require a 7 day hold to clear. Wire transfer and USPS Money Order ship same or next day after BATFE approval. Guaranteed satisfaction. If for any reason you are not satisfied, I will refund all shipping fee to and from. I'm a longstand FFL/SOT with perfect feedback. I also have many references available upon request. Davy Keith, Four Laws of Firearm Safety The gun is always loaded Never let the muzzle point at anything you are not willing to destroy Keep your booger hook off the trigger until your sights are on the target Always be sure of your target and what is behind it 418 Pittman Rd. Ellisville, MS 39437 (601)319-2675 (877)852-9532 Fax FFL 1-64-03368 Verify here: https://fflezcheck.atf.gov/fflezcheck/

Needed, info on anyone who has one for sale or might sell also appreciated.

Ad retracted.

I’m interested in selling my British lendlease C&R greasegun. I will also accept other machine guns plus cash, however they will have to be on form 4 in Florida or on a form 3. add- I also have two spare barrels to go with the gun. One of those is threaded 5/8x24 Price drop to $23k Beau 4106933036

Ad retracted.

I have a good amount of original GM retaining clips. They came from original open packages. I've attached a photo of the original package. I'm selling them at 20 pieces for $20 shipped. I believe this is pretty cheap compared to other places I've checked. They do have cosmoline on them. I have cleaned some off to save you the mess. If you prefer to have them uncleaned just let me know. Thanks for looking.

WTS: M3 Grease Gun Parts Kits I have several very hard to find USGI M3 Grease Gun parts kits available for sale. The kits have been de-milled via torch cut and are in uncleaned condition. Each includes overlapping sections making these ideal for display / dummy gun builds. Each kit is as pictured. I have both Ithaca as well as Guidelamp examples available. Price: $400.00 each **Bulk pricing available for multiple kits / components** - Shipping: Actual Price - Contact: PM or email at bevisblack15NOSPAM@yahoo.com (remove NOSPAM) Payment: Standard PayPal plus the fee or USPS money order

M3 kit. Thought I needed it for a build but didn't.

Looking for a decent M3a1 Grease Gun Bolt. Ty in advance.

Looking for an excellent or better condition M3A1 bolt.

A UNIQUE M3 GREASE GUN. THIS IS A POST 86 AND WILL REQUIRE A SOT AND LAW LETTER IN ORDER TO PURCHASE. PRICE IS $5,800 IF YOU HAVE ANY QUESTIONS, CONTACT ME AT WABRAMS@SGC-SCOTTSDALE.COM

What's the story on this grease gun mag conversion..? Small block welded to back and modified feed lips. Thanks!

I have three hard to find USGI M3 Grease Gun parts kits available for sale. As you can see in the photos the kits have been de-milled and are in uncleaned condition. Each includes overlapping grip and receiver sections that make these ideal for display / dummy gun builds. There are a variety of markings visible on the parts including ordnance acceptance stamps and GE Guidelamp marks. -Price: $300.00 each -Shipping: Actual price -Payment: Paypal plus the fee or USPS money order -Contact: PM or email me at bevisblack15NOSPAM@yahoo.com (remove NOSPAM)

Very nice heavy duty Naval Pintle for Gunboat sides, riverboat mounts, stand up pedestal mount, should bolt easily into nice diameter pipe/tube to make a great stand up mounting for range shooting for firing lines. or off the deck of your house! 225.00 plus 18.00 shipping, This is complete with bottom bolt, and capture push button cross pin. Also available a set of exc. to mint M2HB tripod pintle and T&E with new type capture push button pin for the M3 Tripod, All GI Not foreign junk! 150.00 for the set!!! Also have ots of small new M2HB Parts available. enquire, Paypal or M.O. ok. GPrue8@aol.com is best and quickest or text / call 828-773-1938 Greg