Search the Community

Showing results for tags 'm2'.

Found 16 results

  1. High End Armament Technology Inc in Tulsa Oklahoma has a large assortment of some of the absolute best transferable machine guns available on the market today. HEAT INC, is an 07/SOT that specializes in NFA, Night Vision, Thermal Imaging, Optio-Electronics. All guns are zero round count since being manufactured or reworked by Mike at TSC, Ralph at RDTS, etc. All are new or like new and many come upgraded with some of the best accessories you can get. The best part, they are ready to E-Form today!! Let's start off with some of the following HK and UZI sub guns.... These host guns are all decked out. Turn key, ready to shoot, enjoy, or just collect. Registered Receiver MP5-SD2 by Pearl Manufacturing. Double Push Pin, Burst Lower KAC NAVY SD Suppressor. 47.5K Registered Receiver MP5(F) by Ballistics Inc. Double Push Pin, Burst Lower. 39K Registered Receiver MP5K by Fleming Firearms. Double Push Pin, Burst Lower. 39K RDTS MK5K-SD built off of factory new SP89. Includes RDTS MP5K-SD Suppressor and Non-Suppressed Sleeve. Burst Lower with S&H Sear. 43K S&H MP5SDA3 built using a HK94, S&H SD Suppressor, and Fleming Sear in a Burst Lower. 43K HK MP5K PDW on new SP89 built using all German Parts. Qualified Sear in Burst Lower. 39K HK MP5K PDW on new SP89 built using all German Parts. Fleming Sear in Burst Lower. 39K HK MP5K PDW Reverse Stretch on new SP89 built using all German Parts. TSC installed S&H Sear in a Burst Lower. 39K HK MP5A3 (F) RDTS Built from HK94 using a registered Lafrance SEF Trigger Frame. Factory German 3 Lug/Threaded Barrel. Vented Hand Guard. 39K Action Arms Micro Uzi marked Pistol with a LaFrance Registered Micro Bolt, Angled Trigger Guard, Rubber Coated Correct Micro Stock. 25K Vector Mini Uzi RR 19.5K Action Arms Mini Uzi with Group Industries Bolt installed. 19K Full Size Action Arms LTD Uzi with a Fleming Firearms Sear Installed. 15.5K On to the "long" guns.. Colt Registered Receiver M16 14.5" barrel. Gun was professionally refinished. Unfired Since. Had low round count to start. 27.5K Micro Galil on Action Arms Galil using a Qualified Manufacturing Sear. New Micro Galil parts used on the conversion. 35K Norico 56S with Qualified Manufacturing Sear. A near perfect Bin Laden Clone. Krinkov to the extreme! 37.5K Micro Galil Nickel Coated. Registered Receiver by Qualified Manufacturing on a Magnum Research receiver. 35K And some other things that may interest you... Stemple/High Standard M2HB with quick change barrel kit. Extra QC Barrel, Go/No-Go, Mount, Hardigg Deployment Case. 55K SACO Defense/Maremount M60E6. This one is special. One of the very few transferable M60"E3" marked trunions. Fully upgraded at US Ordnance to a Danish Style E6 Kit. Heavy Fluted Barrel. US Ord. Shipping Box, Spare Fluted Heavy Barrel as well. 80K Pics below are some of the listed items... Detailed pics available or see www.highendarms.com/machineguns for more info. Contact: sales@highendarms.com for purchase 1.918.505.GUNS (4867)
  2. This Plainfield Machine Transferable M2 .30 Carbine Machine Gun is currently in our inventory on a Form 3 Call or text for info @ (502) 909-6653 More pics on our gunbroker ad $9500
  3. M2HB "Ma Deuce" Browning .50 cal manufactured by E.R. Maples Co. Nashville, TN. Fully transferable and excellent condition. No accessories are included. Buyer pays shipping and insurance or makes pick up arrangements. Ready for e-form 3 to dealer. Asking price $29,995 Any seriously interested party who is experienced with the .50 cal and has ammunition, belts, tripod, etc., you are welcome to come to Little Rock and test fire. We can arrange the place. Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant.
  4. Ad retracted, decided to keep.
  5. Ad retracted.
  6. This is a pre-owned U.S. Postal Meter M2 Carbine fully-automatic rifle featuring an 18" Underwood barrel set in a wood stock. The barrel is import marked. The rifle is marked "M1" leading us to believe that the rifle was converted to full-auto. The rifle is in excellent condition and has been test fired. The rifle is currently on a form 4 but can be put on an e-file form 3 and shipped to your local dealer. We are asking $9995 for this item. Please refer to photographs for a more detailed look at the condition and please give us a call at 478-621-4148 with any questions you may have.
  7. New in the wax. $ALL SOLD Direct email only, please: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email.
  8. For your consideration, a rare original set of Unertl scope mount bases for the M1903 USMC sniper rifle, also used on the M1922 and M2 trainers. These are NOT reproductions. These are new old stock, beautiful blue finish with just a touch of patina. Bases are marked E and O on the bottom. Original screws are included, unused and unbuggered. Very hard to find originals, these are a must have for your authentic restoration or build. Sold as is, see pics of condition. $200 OBO shipped to US Prompt Paypal gift or + fees for payment No trades CROSSPOSTED Thank you for looking!!
  9. We are selling four Benelli M2 Entry Tactical Shotguns (Class 3) with a 14" Barrel that we got in a law enforcement trade. These guns are 12 gauge firearms that accepts 2 3/4" and 3" shells and have a cylinder bore. They have a 6-round capacity (5 + 1), a black synthetic stock and open sights. These firearms have an intertia driving system. You can find more information on the Benelli website - Item #11039. These are used guns. We are asking $2500.00 for all four firearms. I can provide plenty of photos. Only seriously interested inquiries please. All NFA Rules apply. These firearms will be transferred FFL to FFL only. This item will be shipped from John Norrell, Inc. Continental U.S. only. Acceptable payment will be in the form of either a cashier's check or a money order made to the order of JOHN NORRELL, INC. Buyer will pay estimated UPS shipping with insurance. Please enclose a copy of your personal identification containing your name and address. We would also like your phone number and email address and a description of the item being purchased in the envelope with your payment. We will ship to FFL in the continental US only. Please be aware that if your shipment is returned for inability to deliver, you will be expected to pay a second shipping charge to re-send. We require an adult signature on most shipments. If you are not satisfied with your purchase or if an error has been made, please contact us. We do all that we can to achieve customer satisfaction!
  10. i have 5 boxes of 20 rounds ea. of unopened .30 M2 APNON CORROSIVEAfter 62 years ammo looks brand new Highly Collectable $40 per box Shipping TBD!Steven404-725-2933 www.newmilitarysurplus.com
  11. I have several new in wax paper Winchester 15 round magazines that are stamped BW. These mags are in perfect condition. Price is $25.00 apiece shipped or $22.00 apiece for two or more. These are original WWII mags. Thanks, Steve Jenkins Automatic Arms
  12. M2HB vs M3 Parts

    So what SPECIFIC parts are different between the M2HB and the M3? I'm aware of the obvious...barrel, shroud, buffer. But what about the small parts like those in the recoil assembly, top cover, feed assembly, etc.? I've noticed some small variances in some parts that I can't tell if they're just minor design changes or if they are specifically for one gun or the other. Thanks!
  13. Looking for opinions, most likely stemming from experience I'd suppose, as to which parts are "must-have" spares when taking a M2HB to machinegun shoots...please share your thoughts. Direct email: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email. Thanks! Nick
  14. WTS M2 Carbine

    This is a very good condition M2 conversion done by Rock Island Armory (RIA) on an Underwood M1 carbine. The manufacturer is listed as RIA and the gun is stamped as well. I don't recall ever seeing one done by them? Very clean and nice wood. I will Include 12 magazines with this rifle. $7,000 shipped to your FFL in the 48.This rifle is on a form 3 in Kentucky. Please call or email me at rext269@aol.com or 859-361-9444 if you have any questions. Thanks for looking Rex Tyson Kentucky Firearms
  15. I have an excellent, as new TNW built M2 50 caliber semi. Gun was built on a hand select kit with many FN parts. Owners manual, head space gauge, 2 USGI barrels, vehicle cradle with ammo can holder, and a rare Ryland Fleet Acme Gadget Hand crank unit, also includes 500 links.I will not separate the package. $14,000 OBO
  16. I have a couple of Original Aimpoint 3X twist Mount Magnifiers as new, just handled, retail is 836.00 from Midway,,,575.00 each with ARD /Killflash complete. Also have as new a couple of Aimpoint Comp M4s with Killflash/ARD rail mount, 80,000 hour battery life, 450.00 ea. is best used when mounted behind an Aimpoint sight; this gives 3x magnification through the tube, while still having the Aimpoint's illumination visible. Different mounting options are also available for any firearm with a Picatinny-style rail using the Aimpoint TwistMount system, or with standard 30mm rings. Anodized aluminum with a rubber cover makes this magnifier waterproof up to 67 feet. Technical InformationEye relief: at 5 degrees field of view, 40-90mm - at full field of view, 60-65mmSurface finish: Anodized aluminum, rubber coveredMounting: 30mm tube, also has four screw holes in the bottom surface for alternate mountingLength: 110mm (4.3")Width/height: 44x41mm (1.7" x 1.6")Ring width: 30mmWeight: 7.1 oz