Search the Community

Showing results for tags 'm1a1'.

Found 19 results

  1. WTS/WTT: Thompson M1A1 Pre-May Dealer Sample

    Thompson, M1A1, Pre-May dealer sample, WWII, Auto Ordnance Corporation, Bridgeport, CT in Excellent Condition. $15,500. Will be at Knob Creek Machine Gun Shoot table C-12. Interested in any type of transferable MG. Davy Keith, Four Laws of Firearm Safety The gun is always loaded Never let the muzzle point at anything you are not willing to destroy Keep your booger hook off the trigger until your sights are on the target Always be sure of your target and what is behind it 418 Pittman Rd. Ellisville, MS 39437 (601)319-2675 (877)852-9532 Fax FFL 1-64-03368 Verify here: https://fflezcheck.atf.gov/fflezcheck/
  2. Transferable WWII C&R Savage manufactured M1 Thompson SMG. Most likely the first month production run of Savage made M1's in July 1942. Gun has been reparked and shows metal wear. The lower/trigger group frame has the proper Savage-produced "FULL AUTO" written in two lines, while on the Bridgeport lowers are marked in all on one line. Rear sight been updated to the later "protected" triangular guard winged rear L sight. Horizontal foregrip is Savage marked. Upper receiver stamped 'S' Stick-type fire control levers. Up graded reinforced cross-bolt in rear stock. Correct Savage stamped bright bolt. Two "GEG" civilian inspector Auto-Ordanace George E. Goll stamps, "R.L.B." Army inspector of Ordnance Colonel Ray L. Bowlin stamped and Crossed Cannon stamped. Paperwork shows manufacture as "SAVAGE". Serial # is 45925. I have owned this gun for 18 years. Just took it to the range, fired a couple hundred rounds, gun ran flawlessly. TSMG M1 comes with one 30 rd mag. 100% funds up front to start paperwork to your dealer. Buyer pays tax stamp out, shipping and insurance at actual cost. Can transfer to a Maryland resident directly with no dealer needed. All NFA rules apply. On form 4 in MD. $23K
  3. Ad retracted.
  4. Original U.S. WWII Thompson M1 SMG Parts Set https://www.ima-usa.com/products/original-u-s-wwii-thompson-m1-smg-parts-set-with-barrel?variant=25653154757 Paid extra at time of purchase to have the parts “hand picked” for the best quality ones they had in stock. -Complete Lower Frame Assembly -New 10.5 inch .45 ACP Barrel -Walnut horizontal fore grip and steel grip mount bar -Complete Walnut butt stock assembly (bolted on) -M1 Bolt Assembly with Bolt Handle -Internal Components- spring, spring guide, buffer, ejector, frame latch -Rear Battle Sight -Front Sight & Pin $2,200 + shipping Album: https://imgur.com/a/U1ImWp1
  5. Transferable WWII C&R Savage manufactured M1 Thompson SMG. Most likely the first month production run of Savage made M1's in July 1942. Gun has been reparked and shows metal wear. The lower/trigger group frame has the proper Savage-produced "FULL AUTO" written in two lines, while on the Bridgeport lowers are marked in all on one line. Rear sight been updated to the later "protected" triangular guard winged rear L sight. Horizontal fore grip is Savage marked. Upper receiver stamped 'S' Stick-type fire control levers. Up graded reinforced cross-bolt in rear stock. Correct Savage stamped bright bolt. Two "GEG" civilian inspector Auto-Ordanace George E. Goll stamps, "R.L.B." Army inspector of Ordnance Colonel Ray L. Bowlin stamped and Crossed Cannon stamped. Paperwork shows manufacture as "SAVAGE". Serial # is 45925. I have owned this gun for 18 years. Just took it to the range, fired a couple hundred rounds, gun ran flawlessly. TSMG M1 comes with one 30 rd mag. 100% funds up front to start paperwork to your dealer. Buyer pays tax stamp out, shipping and insurance at actual cost. Can transfer to a Maryland resident directly with no dealer needed. All NFA rules apply. On form 4 in MD. $25K
  6. Vintage drum. No sales where prohibited. When you email to inquire, include your zip code.
  7. Thompson M1A1 Bridgeport

    Thompson M1A1 BRIDGEPORT Collector grade gun in excellent condition. Comes with magazines shown in photos. Gun is on a Form 4 in Maryland $30,000.00 USD Contact Doug doug@fourseasonslandscaping.net 240-793-7739 ***serious inquiries only***
  8. I'm selling an early AOC M1 Thompson machine gun for $20000. It is on a Form 4 in Texas. I have my FFL/SOT, but this is a personal gun. This gun is a rewat that had its barrel replaced. It was refinished after that and looks great but there is some light pitting in the receiver. I believe the pictures show the condition of the gun. Shoots great also, but I don't enjoy shooting it as much as some more modern subguns, so off it goes! Please contact me with any questions. Thanks! Mit Matelske
  9. Stemple Thompson .45 ACP

    Stemple Thompson in excellent, like new condition. Likely this gun has less than one mag through it. Bought from original owner. Made with original M1928 parts kit not like the later ones with new made parts. Has the look and feel of original Auto Ordnance Thompson for a fraction of the price. Guaranteed to work flawlessly. 3 day inspection. Comes with one Thompson 30 rnd mag. On Gunbroker so this gun may go at any moment. Don't delay it's a great price for an excellent investment. $11,200 OBO. Shipping FedEx 2cd day $150. MS residents 7% sales tax. On form 3 can eform for fast dealer to dealer approval. References available upon request. IMG_1899 by IMG_1900 by IMG_1898 by IMG_1897 by IMG_1896 by IMG_1895 by Davy KeithIMG_1894 by
  10. This is an Auto Ordnance M1A1 that has the original box, manual, warranty card, and catalog! It shoots extremely well and is in perfect condition. This Thompson gun is papered C&R and was made in 1986. There were only 600 M1 made in West Hurley NY. Comes with 3 magazines and original sling from WW2. Barrel length 10.5" overall 32" . Buyer is responsible for all shipping and insurance costs. I will pay the first stamp. $22,000 Pictures here: https://imgur.com/a/5mtf1
  11. Pre May Sample Bridgeport M1A1 on a form 3 in FL It came out of a local police department on a trade, Import marked on the bottom of the trigger guard Law Enf Ord, Athens GA This SMG comes with an original GI issue 5 magazine canvas pouch, 5 - 20 round magazines (2 Seymour, 2 Auto Ordnance, 1 misc). Overall Condition: It is in 85% condition, with the original finish showing signs of wear in spots on the top receiver, but no pitting. Fires in full auto and semi auto modes flawlessly and has been enjoyed for 3 years here. Shipping and insurance will be $100. Credit card add 2% $11000 352-Three-Eight-Five-2767 Mark
  12. For your consideration, I have one NOS in grease wrap M1A1 Thompson SMG bolt. Savage mfg, still sealed in cosmoline. Perfect to keep your SMG running or to tuck away for a rainy day. $215 shipped to US First unconditional "I'll take it" posted in this thread gets it Prompt Paypal gft or + fees for payment No trades CROSSPOSTED Thank you for looking!!
  13. For your consideration, a very nice USGI M1A1 Thompson SMG rear receiver demil. Good amount of meat on it, nice rear sight. No rust or damage aside from the obvious. $50 OBO shipped to US First unconditional "I'll take it" posted in this thread gets it Prompt Paypal gift or + fees for payment No trades CROSSPOSTED Thank you for looking!!
  14. Have here an original bolt for Tommy gun made by Savage in excellent shape. With recoil spring and extractor. $300 shipped to you. [/URL
  15. I'm in the market to buy a USGI Thompson M1 or M1A1 or a M3 or M3A1 Grease Gun. Not looking for any rare museum quality pieces. This will be a shooter. I'd like to do a 50/50 payment and have plenty of references from dealers and other board members, as well as 100% positive feedback on other forums. Obviously I prefer a gun in state (FL) or on a form 3. Not interested in West Hurleys or Medea guns. Please e-mail me at matthewtroccoliesq (at) gmail (dot) com
  16. Available for your consideration, New Old Stock USGI M1A1 Thompson SMG bolts. These are new in grease wrap, Savage mfg. perfect for keeping your Thompson SMG running or to tuck away for a rainy day. $200ea **ALL SOLD PENDING FUNDS** $7 flat shipping Payment by prompt and discreet PayPal +fees or f/f gift, MO, check or cash Only a few available, first come first served IM or email with questions/offers Thank you for looking!
  17. WTB Thompson M1A1 stripped trigger frame. Please reply to this thread or email chad@midlanddisplay.com
  18. I'm searching for Thompson 1928 and M1A1 trigger frames for a project. If you have any available (complete or stripped) and are looking to sell them I'm interested. Please email with pics and pricing for fastest response. thanks in advance
  19. I have some NOS in wrap M1A1 Thompson bolts for your consideration. These are NOS Savage bolts still sealed in cosmoline wrap. Limited quantity available, these won't last long! $195 ea $7 sflat ship First "I'll take it" posted in this thread gets it Payment by discreet Paypal+fees(no gift), MO, check or cash No trades Thank you for looking!!