Search the Community

Showing results for tags 'm1918'.

Found 13 results

  1. Excellent condition Browning BAR M1918 M1918A2 original IBM marked barrel dated 3 43. These once plentiful original war barrels are getting harder to find especially in this condition. Why hesitate when your registered machine gun is work $30K? It's a worthwhile investment for your guns future. Don't delay someone will buy this as they always go quickly. $800 shipped. Condition Muzzle measures 2.5 and throat 2 which is excellent condition and a perfect match for your IBM BAR. Finish is excellent. There are marks on the barrel where it was removed quite possibly in an arsenal somewhere as they weren't gentle and weren't concerned about marring the finish. Those area's are hard to see so I believe it's safe to say it was refinished as they aren't bare. Bore is nice, shiny strong grooves. No corrosion at all. I'd rate it a 10 out of 10 as it's mirror. Terms: USPS Money order, Paypal friends / family cc 3% more. Three day inspection if non fired non installed period if not satisfied will refund all but shipping cost to and from. IMG_3855 by Davy Keith, on Flickr IMG_3836 by Davy Keith, on Flickr IMG_3837 by Davy Keith, on Flickr IMG_3838 by Davy Keith, on Flickr IMG_3839 by Davy Keith, on Flickr IMG_3840 by Davy Keith, on Flickr IMG_3841 by Davy Keith, on Flickr IMG_3842 by Davy Keith, on Flickr IMG_3843 by Davy Keith, on Flickr IMG_3844 by Davy Keith, on Flickr IMG_3845 by Davy Keith, on Flickr IMG_3846 by Davy Keith, on Flickr IMG_3847 by Davy Keith, on Flickr IMG_3848 by Davy Keith, on Flickr IMG_3849 by Davy Keith, on Flickr IMG_3850 by Davy Keith, on Flickr IMG_3851 by Davy Keith, on Flickr IMG_3852 by Davy Keith, on Flickr IMG_3853 by Davy Keith, on Flickr IMG_3854 by Davy Keith, on Flickr
  2. Excellent condition Browning BAR barrel marked IBM 3 - 43. Throat measures 1.5 and muzzle 2 so it's basically like new. It's hard to find BAR barrels from WWII or earlier that aren't shot out. Bore is crisp and clean. Has some tooling marks when it was removed by someone at some point in history. I refinished it to give it a smooth appearance. $525 shipped. IMG_0879 IMG_0878 IMG_0880 IMG_0881IMG_0882IMG_0883 IMG_0884 IMG_0885
  3. Original complete Browning BAR M1918A2 buffer assembly. Includes everything you see buffer housing, recoil spring, actuator, actuator spring, buffer cones and plates, buffer, actuator sleeve with washer (washer not pictured but included). Condition is refinished in great condition. 100% guaranteed to operate as intended. $315 shipped USPS PM. Accept paypal, money order, bank and personal checks. I have many more Browning BAR M1918 parts available. Please check my website as I am updating it now. Also feel free to email me sales@rebelrifle.com IMG_0800 by Davy Keith, on FlickrIMG_0801 by Davy Keith, on FlickrIMG_0799 by Davy Keith, on Flickr
  4. Very rare to find WWI Colt BAR M1918 extractor. 9.9 times out of 10 these extractors are WWII or post war NES or Royal Typewriter. This one is an original Colt with the C and arrow. It's in excellent like new condition. Correct your Colt BAR up with this one. It's not cheap but you won't find another one anytime soon. Well worth it for your original Colt BAR. $150 shipped.
  5. I have an original WWI Model M1918 BAR barrel. It's very rare to find an M1918 barrel, original from WWI period but even more rare to find one in this condition! Throat measures "0" and Muzzle erosion ".07" which is basically "0" but I round it to 1. How this barrel survived all these years without being shot out is a small miracle. This particular barrel is marked with an "M" which stands for Marlin. It's dated "7 18" which stands for July of 1918. It has the flaming bomb ordnance stamp between the M and date and again on the outside near the throat. Even more intriguing is the fact that this barrel came off a lend lease BAR to England. Markings of .30/062-494" BNP with crown Tons per square is marked near the throat on the outside of the barrel. This barrel is chambered for the original caliber of of the BAR which is 30-06. There are some tool marks where the barrel was installed or removed (most likely removed) at an arsenal somewhere (see last pic). I've seen these tool marks before on many BAR barrels. It's indicative of using a vice that was used to take the barrel off. It's not a huge gash but there are marks indicating such. Now for the best part. The bore is mirror finish. No erosion, cloudiness or frost. Strong lands and grooves which backs up the measurements of TE 0 and ME 1. I place this barrel at a 9 out of 10 ready for your original M1918 Marlin BAR. They aren't making these any more and finding one in this condition is rare as hen's teeth so buy it now before someone else does. I have a "best offer" button but don't insult with low ball offers as this is going to move close if not at the asking price. I'm very familiar with what BAR parts are commanding. Recently at Knob creek I spotted an original Marlin parts kit that the owner wanted $4,000 for. Get it now before it's too late. After all, your registered gun deserves it and it's worth it! Transferable BAR's are now worth north of $30,000! $950 shipped to anywhere in cont. US. Will accept, checks, money order, etc. 3% more for paypal or credit cards. I have many BAR parts large and small so email me what you need and I can let you know if I have it and how much.
  6. I have an excellent as new M1918 colt manufactured slim profile BAR barrel with date stamp 1 19, the bore is bright and shinny sharp lands and grooves, there is no throat wear and the crown is as factory new. $1350 shipped in CONT US, USPS money order, certified bank check, personal check (checks have to clear ) Insurance is extra....
  7. Lots of BAR belts for sale to thin out the collection: WWI Belts: Long 10/11 1918 marked WWI Gunners belt, in unissued condtion. Some wear on the butt cup and some rust stains on the left rear pocked but overall a very nice belt $165 http://www.wwiibarman.com/collections/belts/products/wwi-gunners-belt 2nd assistant gunners belt, Marked Long 11-18. Beautiful unissued condition $250 http://www.wwiibarman.com/collections/belts/products/2nd-assistant-gunners-belt Issued WWI P.B. & Co 6/9 1918 2nd assistant gunners belt. Rust/blood stains on bottom of one pouch, I'd rate at 65% condition, see photos on link; Has unit badge! $165 http://www.wwiibarman.com/collections/belts/products/wwi-2nd-assistant-gunners-belt Issued WWI USMC 2nd assistant gunners belt with 4 BAR pouches and 4 M1903 clip pouches. Unmarked, this is the USMC Version of the hardest variation of all BAR belts. Used in good shape, some wear, see photos on link: $285 http://www.wwiibarman.com/collections/belts/products/wwi-usmc-2nd-assistant-gunners-belt 3rd assistant Riflemans belt, deep blue, just like a navy landing party would have worn. All WWI pattern (large buckles and early belt size adjustments). Name written on left inside (Baples?) and in 85% + condtion. Perfect for your Sand Pebbles tribute! $350 http://www.wwiibarman.com/collections/belts/products/navy-landing-party-riflemans-belt Unissued USMC M1918 Gunners belt, round taped flaps. You won't fine a nicer one! $235 http://www.wwiibarman.com/collections/belts/products/usmc-wwi-gunners-belt-unissued Mint unissued left side WWI Bandoleer. Marked P,B, & Co 7-1918. Rubber stamped ORD 22 and 79 cents on front. $115 http://www.wwiibarman.com/collections/belts/products/wwi-bandoleer-left-side-1 NOS packaged bandoleer, unfortunately it's been opened. Bandoleer is dated 7-18, packaging is dated 3/7/47 $165 http://www.wwiibarman.com/collections/belts/products/nos-bandoleer WWI USMC Left side bandoleer marked Long 5-18. Mint and un-issued but with small hole in front $99 http://www.wwiibarman.com/collections/belts/products/usmc-bandoleer-left-side WWI USMC right side Bandoleer with rounded flaps indicating Marine issue. Marked Long 4-18. Mint and unissued but there is a tear in one of the flap and the strap, see photo on link: $80 http://www.wwiibarman.com/collections/belts/products/usmc-bandoleer-right-side WWII Belts: PB&C khaki belt marked 9-18, upgraded to M1937 belt standards with the smaller buckles and later adjustable belt system. Rubber stamped M6190 on left side. Belt is in 70% condtion, one flap has been replaced, one of the pouches has a corner that has worn through and missing the drain hole grommet. A very interesting early WWII upgrade $115 http://www.wwiibarman.com/collections/belts/products/modified-2nd-assistant-riflemans-belt Unissued M1937 belt marked Boyt 1942. Flaps are slightly darker material. A rare belt in great shape! $195 http://www.wwiibarman.com/collections/belts/products/two-toned-m1937-belt left half of a M1937 modified gunners belt in fair conditon. All clasps work and no rips. This has been modified to the M1937 standard and has (paint? Blood?) splatter on the fabric $38 http://www.wwiibarman.com/collections/belts/products/wwi-belt-modified-to-m1937-specs-left-side-only Post WWII Left half of BAR belt: Post war dark olive 1/2 belt. Three pouches, repair on the front male clasp. $22 http://www.wwiibarman.com/collections/belts/products/left-half-of-a-m1937-belt M1937 Gunners belt, marked Concord 1951. This one is dark green and has no rips although one flap is frayed. Perfectly serviceable used mag belt $68 http://www.wwiibarman.com/collections/belts/products/m1937-2nd-assistant-riflemans-belt-2 Rare, hard to find in the US, a M1937 pattern gunners belt marked ROK (Republic of Korea). Used but in good condition $195 http://www.wwiibarman.com/collections/belts/products/rok-south-korean-m1937-belt 1970's US Belt; This is sort of a mystery belt. I've never found documentation of it but have seen this belt in the Tales of the Gun show in the Anniston Army Depot so this is a US issued belt. It's made of cotton and nylon and has a M1956 style pistol belt with three eyelets. It still holds 12 mags just like a M1937 belt $80 http://www.wwiibarman.com/collections/belts/products/latest-version-gunners-belt-1980s Thanks for looking all, and thanks to Dave and Buddy!
  8. Greetings all, George in NC here, I'm thinning out the BAR collection of over 20 years. I have all sorts of things from the mundane everyday item to rare one-ofs. Lots of spares to keep your BAR running, some NOS parts, accessories. Basically everything but the receiver (and I'm selling those too but cut up in little chunks!) Brouse around at http://www.WWIIBARMAN.com and enter code Sturm for free shipping on any order. I'm motivated to sell and once it's gone it's gone. This is 20 years of accumulated collecting that I'm getting rid of. Thanks Buddy and David for keeping the site going!
  9. Large lot of USGI BAR parts for sale including: Cylinder Gauge x 1 BAR Gas Tube Slide Assembly x 1 Gas Tube with gas tube regulator x 1 Flash Hider x 1 Front sight protector x 1 Forearm x 1 Carry Handle x1 Late War bipod x 1 Early war bipod x1 Early War Bakelite stock with monopod cutout (stripped )x 1 Late War Stock complete with buttplate and swivel ass. x 1 Stock retaining sleeve x 1 US WWI Model BAR Combination Wrench x1 BAR Combination tool, Reamer x 2 Brush, Set, BAR x 1 BAR Buffer Head x 3 BAR Buffer Assembly Cup x 12 BAR Buffer Assembly Actuator x 2 BAR Buffer Actuator Spring x 3 BAR Sear Release x 3 BAR Buffer Key x 3 BAR Buffer Assembly Cone x 12 $1000 shipped http:// http://
  10. Selling one Colt Monitor Parts set, demilled by torch cutting and missing the front half of the receiver. It appears like new in all other regards. I am unsure of it's history or serial number, I was told it came out of a widows closet post 86' and was torch cut on site. Most experts agree there were aprox 125-135 Monitors built and 90 went to the FBI. That leaves at most 45 out there in the wild. This is perhaps the rarest and most sought after production machine gun ever $12,500 http://www.wwiibarman.com/products/colt-monitor-parts-kit I am liquidating most of my personal BAR collections, look around the WWIIBARMAN site for more BAR goodies
  11. In stock in our store in McDonough, GA is a BEAUTIFUL Group Ind. M1918A2 BAR. This beautiful M1918A2 BAR is in impecable condition. Not pictured but included are a carry handle, bipod and one magazine. This is an execellent machinegun. Wood foregrip and black stock. The gun appears to me to be unfired. I hesitate to say that because I cannot provide proof, but it is incredibly clean and shows no typical signs of use around the chamber and ejection port. IF it has been fired, it wasn't much. The previous owner is deceased and therefore I am unable to ask about its firing schedule. In stock, ready to Form 3 to your dealer or Form 4 to a GA resident. Price is $30,000.00 cash or check. GA residents add 7% sales tax. More picture available here - M1918A2 at QRF Jake Hinton Quiet Riot Firearms 678-884-6700 jake@quietriotfirearms.com
  12. WTB: Demilled BAR Receiver

    Looking for a demilled BAR receiver. Email: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email. Thanks!