Search the Community

Showing results for tags 'ingram'.

Found 6 results

  1. WTS: M10A1, .45ACP (Reduced) $6500

    Military Armament Corp. Ingram M10a1 9mm / .45ACPLike new in factory box. Gun is set up in .45acp currently. $6500 In stock ready for transfer. This gun has been in a private collection since 1987. Buyer is responsible for shipping fees. Please contact me with any questions. Justin Bupp justin@athensgunclub.com 706-546-6111 115 Mill Center Blvd Athens, GA 30606
  2. Selling my RPB overstamp M10 w/ RPB suppressor package. The gun and suppressor is in .45, runs in excellent with any ammo you put in it. The gun has the LAGE oversize safety switch and a new aftermarket front strap recently added. The suppressor is a RPB ( non matching serial number to gun) stamped that has been upgraded by Tom Bowers to a wipless modern version and a grip-tastic was added for handling control. Included with the package is a rare Cobray camo travel bag, barrel extension, 2/30 rd mags, 1/35 rd mag, 1/10 rd mag, mag loader, reproduction manual, and the original safety switch. The gun is configured to Full Auto only per CT law. Currently on a Form 4 in CT. Looking for $7200 for the package. $6800 for just the gun and silencer. Stamps and shipping extra. 50/50 ok. I can not sell the hi capacity mags to instate CT residents unless your FFL or LEO. Serious inquiries, message me directly gtaforever88@yahoo.com. https://imgur.com/a/QR2f3r6
  3. The B&T USA / Brugger and Thomet KH9 was made in Switzerland and designed by Karl Brugger as Karl's Hobby 9mm which is a modernized Italian Sites Spectre M4 double/single action submachinegun with several design improvements. The KH9 has the option of feeding from either standard B&T magazines interchangeable with all of their firearms or includes a Finnish Soumi KP31/M31 magazine adapter to use coffin magazines. The recoil-springs operate on twin guides as opposed to the Spectre which is free floated and prone to binding. Receiver is a monolithic SCAR-type with quadrail and taken from the B&T GHM9. Barrel has an HK three-lug adapter. Controls are completely ambidextrous with magazine release and decocker on both sides. Charging handle was inspired by the Ingram M10 or IMI/IWI UZI, Pistol grip was based on the SIG SG550/STGW90, and the rear trunnion uses standard B&T MP9/TP9 stock/brace assemblies. Package includes hardcase, Soumi coffin magazine adapter, front/rear flip-up sights, two 30 round magazines, cleaning kit, manual, and hard-case. Photo is representative of another of my B&T KH9 examples. The firearm you will be receiving has not been fondled or touched. Made in Switzerland, this is 1 of 400 imported. Once gone, these will not be seen again. $2000 shipped.
  4. C&R Ingram m6 45 acp police version with very rare Federal Laboratories case, cleaning rod and 2 mags. Runs flawlessly. On form 4 in North Carolina. $8000.00 Text (336)671-1928 for questions or to request pics
  5. For sale is my Mac 10 by Ingram in Powder Springs GA. I am the second owner and have had it for several years. The original owner shot a few hundred rounds through it I have never shot it I bought it as an investment. Along with the sale price is all the accessories I have for it including 21 mags, 2 extra spare uppers (one complete 9mm upper and one upper only), 2 Colbray loaders, 2 slings, 11 buffers, a briefcase carry box, and the original cardboard box, and a registered homemade (form 1) Sonics suppressor. There will be 2 tax stamps required. The Mac 10 is on a form 4 the suppressor is on a form 1 both in Florida. Buyer pays all fees and shipping. Asking $6800.00 obo for all e-mail me at jlaskowsky73@gmail.com or (813)545-3257 for pictures.
  6. Ingram M6 Police Model .45 ACP submachine gun with rare Police Ordnance case $8495.00 SOLD This gun is in excellent shape and it comes with 3 original magazines, a modified Thompson magazine (not shown), cleaning rod, and rare Police Ordnance Co. case (only about 20 cases were made). Price includes insured shipping to FFL/SOT. Please contact me if you have any questions. Note: This gun is from my personal collection and was not transferred to my 07 FFL when the SOT on my 01 ran out. I am paying the SOT again on my 01, so I can transfer on Form 3 at the end of the month. It can transfer now on form 4 to non-SOT SC residents or for any SOT not wanting to wait a few weeks for me to submit form 3 and willing to pay the $200 tax. James GSA - 07FFL/SOT gordonspcl@aol.com (864) 430-4286 mobile A Little History: Gordon Ingram designed his first prototype submachine gun during late 1940s; soon after his first prototype he produced next design, known as Model 6 The Ingram Model 6 Submachine Gun was manufactured by the Police Ordnance Company in California, with the very first models made in El Monte, and subsequently, Los Angeles. Available references on the subject, which are listed on this page, indicate the company operated from 1948 to 1952, and saw some short-lived commercial success. Gordon Ingram was the designer, and his submachine gun designs later progressed into the MAC series of firearms. The Model 6 can be mistaken at a glance for a Thompson, particularly the Model 6 Police Model, which features a vertical foregrip. The main difference is that the Model 6 has a tubular receiver, and a sheet metal lower housing. The weapon was cheap to manufacture, and filled a niche for a new, easily procurable, inexpensive police submachine gun. In total, approximately 10,000 Model 6's were made between the Los Angeles and Peruvian manufacturing operations, with about 2000 made in L.A., and 8,000 in Peru. Police Ordnance Company inaccurately inflated their published production number of the Model 6 to 15,000 units. The Peruvian government was granted a license to manufacture the weapon for use by their military, and guns produced in Peru have a Peruvian crest roll marked on top of the receiver. Many of the US produced M6s were sold to Peru before production was established there. The weapon also reportedly saw service in Cuba, Puerto Rico, and Thailand. A very unique and desirable feature of the Model 6 is its progressive trigger, which produces semi-automatic fire with a short pull, and full automatic fire as the trigger is pulled further. The VERY early "Police" M6 and ALL "Military" models had progressive triggers, but no selectors. The selector, when in semi position, prevents the progressive trigger from engaging the full-auto mode.