Search the Community

Showing results for tags 'imi'.

Found 19 results

  1. $1325/shipped, excellent condition. More Uzi pics in album here: crossposted on AKFiles and FALFiles
  2. WTS: IMI Israeli made, DE 50, brushed stainless, ported, includes 4 magazines, second 10 1/2 inch 50 DE barrel. $1995.
  3. High End Armament Technology Inc in Tulsa Oklahoma has a large assortment of some of the absolute best transferable machine guns available on the market today. HEAT INC, is an 07/SOT that specializes in NFA, Night Vision, Thermal Imaging, Optio-Electronics. All guns are zero round count since being manufactured or reworked by Mike at TSC, Ralph at RDTS, etc. All are new or like new and many come upgraded with some of the best accessories you can get. The best part, they are ready to E-Form today!! Let's start off with some of the following HK and UZI sub guns.... These host guns are all decked out. Turn key, ready to shoot, enjoy, or just collect. Registered Receiver MP5-SD2 by Pearl Manufacturing. Double Push Pin, Burst Lower KAC NAVY SD Suppressor. 47.5K Registered Receiver MP5(F) by Ballistics Inc. Double Push Pin, Burst Lower. 39K Registered Receiver MP5K by Fleming Firearms. Double Push Pin, Burst Lower. 39K RDTS MK5K-SD built off of factory new SP89. Includes RDTS MP5K-SD Suppressor and Non-Suppressed Sleeve. Burst Lower with S&H Sear. 43K S&H MP5SDA3 built using a HK94, S&H SD Suppressor, and Fleming Sear in a Burst Lower. 43K HK MP5K PDW on new SP89 built using all German Parts. Qualified Sear in Burst Lower. 39K HK MP5K PDW on new SP89 built using all German Parts. Fleming Sear in Burst Lower. 39K HK MP5K PDW Reverse Stretch on new SP89 built using all German Parts. TSC installed S&H Sear in a Burst Lower. 39K HK MP5A3 (F) RDTS Built from HK94 using a registered Lafrance SEF Trigger Frame. Factory German 3 Lug/Threaded Barrel. Vented Hand Guard. 39K Action Arms Micro Uzi marked Pistol with a LaFrance Registered Micro Bolt, Angled Trigger Guard, Rubber Coated Correct Micro Stock. 25K Vector Mini Uzi RR 19.5K Action Arms Mini Uzi with Group Industries Bolt installed. 19K Full Size Action Arms LTD Uzi with a Fleming Firearms Sear Installed. 15.5K On to the "long" guns.. Colt Registered Receiver M16 14.5" barrel. Gun was professionally refinished. Unfired Since. Had low round count to start. 27.5K Micro Galil on Action Arms Galil using a Qualified Manufacturing Sear. New Micro Galil parts used on the conversion. 35K Norico 56S with Qualified Manufacturing Sear. A near perfect Bin Laden Clone. Krinkov to the extreme! 37.5K Micro Galil Nickel Coated. Registered Receiver by Qualified Manufacturing on a Magnum Research receiver. 35K And some other things that may interest you... Stemple/High Standard M2HB with quick change barrel kit. Extra QC Barrel, Go/No-Go, Mount, Hardigg Deployment Case. 55K SACO Defense/Maremount M60E6. This one is special. One of the very few transferable M60"E3" marked trunions. Fully upgraded at US Ordnance to a Danish Style E6 Kit. Heavy Fluted Barrel. US Ord. Shipping Box, Spare Fluted Heavy Barrel as well. 80K Pics below are some of the listed items... Detailed pics available or see for more info. Contact: for purchase 1.918.505.GUNS (4867)
  4. Looking for a Action Arms registered receiver A or B with the blocking bar removed must be on a form 3 or form 4 in Arizona. C&R could be on F4 Let me know what you have and price please. (DO NOT REPLY ON THIS THREAD E-MAIL ONLY) Thanks
  5. *Gemtech Mossad II silencer not included* Selling a Weapon Specialties (Weapspec) registered bolt that has been treated with Robar NP3. Exceptionally smooth and reliable. Host receiver originally stamped as a .45 caliber. Excellent condition and runs like a champ. Comes with nine 32rd and one 25rd magazines. $11,995. $11,495. Located on a Form 4 in AZ. Please call me with any questions. 03/22/2019: SOLD! Thank you all for your interest!Cheers! Richard (520) 891-2132
  6. 4 Guns for Sale ELITE IRON Suppressor and Bipod Solutions of a Higher Caliber Please email questions to Thanks for looking, Kathy FFL/SOT in MT 406-244-0234 Guns are also listed on our website and have additional pictures. Pre May IMI UZI $7000 9MM Overall Very good + condition. Aftermarket threaded barrel. Original box with sling, manual, cleaning rod, and 1 magazine. Class 3 sales sample. No LE letter required. FN G1 Pre May $7000 FN G-1, 7.62mm NATO, PRE-MAY Sales Sample. In VG+ condition. Bore and Chamber in excellent condition. Wood stock has slight marring. Manufactured by: FN Liege Belgium IMP: Inter American IMP/EXP Co Class 3 sales sample. No LE letter required. IAC Model 1887 SBS $300 IAC Model 1887 Short Barrel Shotgun 15.5" Barrel 32.5" Overall Length. Condition: Like New with Original Box. Work done by ELITE IRON This NFA item will need to be shipped to Class 3 dealer in your state. Vector Arms PTR-91 SBR $1400 J.L.D. Ent. Model PTR-91 converted by Vector Arms. .308 Cal. “Sear” Ready. Barrel length 9″, overall length 31.5″. Condition: Excellent, 1 light scratch mark on trigger housing. 1 magazine included. This NFA item will need to be shipped to Class 3 dealer in your state.
  7. Brand new never been in a gun. Nice IMI manufactured, with chrome lining. .308 cal. $125 ea. plus shipping. USPMO only. Thanks, R.L.
  8. Looking to trade a Mint M11a1 large mag well Mac (Set up in 9mm) with a few uppers including a Side charger upper, few different stocks, Nib CFW-A Bolt (All tuned) a few mags and some misc. stuff for a Registered UZI Bolt. No host just a good FA Registered Bolt. Serious inquires only. I can provide pics of my gun. Thank you in advance.
  9. IMI MINI UZI MACHINE GUN WITH AGENDA SIX CAN, B&G BOLT GUN Excellent $18,900.00 Fully transferable machine gun to individuals. On 2 form 4's . Will ship to your dealer for actual cost plus insurance. Payment in full to start transfer Buyers pays 2 Tax stamps to start transfer. Class 3 dealer since 2001, gave up FFL 2015 Make sure this is legal in your location,and you will get NFA approval. All sales final no returns. ALL NFA RULES AND LAWS APPLY Like all things for sale they are in stock for immediate transfer to your FFL/SOT or if resident of Nevada direct to you on form 4. No refunds once paperwork starts, no transfer till paperwork is complete. Make sure you are BATF&E qualified. These fine weapons can be viewed in person, as flights to Las Vegas are fairly inexpensive. Class 3 FFL/SOT from 2001-2015 under Kymtec LLC. Thanks for looking. Contact Tom Mac Niece 970-946-4509
  10. The B&T USA / Brugger and Thomet KH9 was made in Switzerland and designed by Karl Brugger as Karl's Hobby 9mm which is a modernized Italian Sites Spectre M4 double/single action submachinegun with several design improvements. The KH9 has the option of feeding from either standard B&T magazines interchangeable with all of their firearms or includes a Finnish Soumi KP31/M31 magazine adapter to use coffin magazines. The recoil-springs operate on twin guides as opposed to the Spectre which is free floated and prone to binding. Receiver is a monolithic SCAR-type with quadrail and taken from the B&T GHM9. Barrel has an HK three-lug adapter. Controls are completely ambidextrous with magazine release and decocker on both sides. Charging handle was inspired by the Ingram M10 or IMI/IWI UZI, Pistol grip was based on the SIG SG550/STGW90, and the rear trunnion uses standard B&T MP9/TP9 stock/brace assemblies. Package includes hardcase, Soumi coffin magazine adapter, front/rear flip-up sights, two 30 round magazines, cleaning kit, manual, and hard-case. Photo is representative of another of my B&T KH9 examples. The firearm you will be receiving has not been fondled or touched. Made in Switzerland, this is 1 of 400 imported. Once gone, these will not be seen again. $2000 shipped.
  11. Real nice IMI Uzi conversion by Hard Times Armory, Kennesaw, GA. like new condition. Registered receiver (NOT a bolt gun). Unlike a bolt gun, all parts are interchangeable with SMG parts and can be replaced if needed (including bolt) and the gun can also be changed to other calibers such as 45acp, 22LR, .40sw, etc. with available caliber kits. Work done by Vector: Replaced bolt with new IMI bolt & recoil assembly Replaced top cover with new IMI ratcheting top cover Enlarged sear cut-outs to accept heavy duty sear. Replaced complete trigger assembly with new IMI assembly (ARS) Modified barrel trunion to SMG specs Replaced barrel with new IMI 10.25" Micro welded and engraved "UZI- SMG" in place of "UZI CARBINE" Replaced furniture with new IMI Aluminum oxide blasted and manganese phosphated (parkerized) Moly coated flat black baked finish The closest you can get to an original IMI SMG as all parts are IMI. Gun is in like new condition and runs great. Nice smooth finish (pics do not do it justice as camera flash is reflecting on oil residue). No dings or scratches. Normal wear on top cover. Only a few hundred rounds have been run since the work by Vector. Comes with 40rd magazine (not shown). Shipping to lower 48 states by USPS Registered Mail included (insurance extra) Please PM or email to with any questions. Thanks for looking, James 07FFL/SOT 864-430-4286
  12. Up for sale is an IMI Uzi Pistol chambered in 9mm and imported by Action Arms in PA. It is a semi automatic, MINT Condition Safe Queen. This is an AUTHENTIC, GENUINE IMI piece! They don't get any cleaner than this. $1150 + Actual cost of shipping - Priced for a QUICK sale. MARKET IS $1300-1600! Shipping includes Professional packing, Insurance, and requires an Adult Signature - everything you would expect when purchasing a high quality piece. I accept payment via cashier’s check, money order, or wire transfer. Please look for my other listings! I am liquidating a number of unique and NFA items that have been sitting in my safe for years. You can contact me on here with any questions, via my personal email (, or you can call my cell at (239) 825-53four8 - please leave a voicemail if I don't answer and I will call you back ASAP. If you have any concerns, references are available upon request. I am very reputable in both the firearms and NFA worlds. I am an FFL holder and I own a business based out of Naples, FL. We operate out of an 8,000 square foot building and specialize in buying and selling guns along with ammo and other accessories. We often sell at gun shows in the Fort Myers, Tampa, and Miami areas. This has been my profession for many years. If there is anything that you are looking for, or if you have any questions, please do not hesitate to ask! For the quickest response, you can reach my assistant by phone Monday through Friday between 8am and 4:30pm EST at (239) 434-0841.
  13. Exc condition IMI Israeli Mini Uzi Semi and a rare find. Pre ban Import Ready to SBR Has had over 20 years Plus shipping and Insurance $3700
  14. I have a few left. $125 plus shipping. No trades. USPMO "ONLY" please Thanks, R.Leyshion, Jr.
  15. Here's something you don't see often. Sure there's plenty of used surplus but I have for sale 1 NEW NEVER USED genuine IMI 9mm full auto UZI bolt. Still has a tiny bit of the Israeli acceptance stamp left on the front. Comes complete with new extractor and extractor pin. I've seen a few of these on gunbroker and they always go for over $100 plus shipping and that's usually for a stripped bolt. (no extractor or pin) You can get this one for $85.00 shipped CONUS. I accept PayPal (no fee for "friends and family" payment) or CC add 3% DM me for payment info.Reply to listing with any questions.
  16. I have for sale various small UZI parts as pictured. Included but not limited to a couple mod A front sights, 8mm push pin, 9mm sleeves for 8mm pushpin. several bolt safeties, 1 semi and 1 fa sear mounting nut and screw for metal stock.... ect ect. You get everything pictured for $30.00 shipped. I accept PayPal (no fee for "friends and family payment") or CC add 3% DM me for payment info.
  17. I have for sale 1 genuine IMI model B full size 9mm semi-auto UZI bolt. Want the best bolt possible for your full size semi? This is the one! NOT a reworked full auto bolt. Perfect for any model A or B full size UZI. In excellent cond and has been used very little. $265.00 Shipped CONUS via Priority Mail. Tracking info will be provided. I accept Postal MO, PayPal and CC. No extra fees. DM me for payment info. Reply here for any questions.
  18. For sale is a very, very nice and Near New IMI Action Arms imported Uzi Model B Carbine in 9mm. Gun looks New inside and out and only has a few handling marks on the exterior. It is in a solid 98% plus Condition. If it was shot, it was not much! Carbine comes with original and matching 16 inch barrel, IMI marked 32rd magazine, dummy barrel, original and Like New Uzi Sling and original factory manual. Manual shows some wear, but in Good Condition. Price is $1,695 plus $35 for shipping to your FFL via FedEx within lower 48 states. Ohio sales are subject to 7% sales tax. Sorry, no sales to where illegal. Please email or call with any questions. Please also know that we are always buying all types of firearms from pistols, rifles, and Registered Machine Guns. We even buy all types of gun parts and related items. Feel free to call me personally via the below phone number for an offer. Thanks, Trent Warncke President Inverse Technologies FFL/SOT (937) 470-7466 mobile
  19. WTB: Micro Galil

    Looking for a Post Sample Micro Galil