Search the Community

Showing results for tags 'grease gun'.

Found 23 results

  1. WTS: M3 Grease Gun Magazines W/ Pouch - Excellent 6 total mags. These are in nearly new condition with some light rub marks / storage wear. They may have had a few rounds through them but it doesn’t show. A lightly used Korean War era shoulder pouch will be included. Perfect for display / use. Price: $220 Payment: Paypal gift / friends & family, Venmo, USPS Money Order, Check Shipping: Actual Cost Contact: PM or email at bevisblack15NOSPAM@yahoo.com (remove NOSPAM)
  2. Ithaca M3A1 Fully Automatic Sub Machine Gun - Machine Guns at GunBroker.com : 918445812 Seller would not show me FFL or Form3 until AFTER he received wire transfer Really do they think everyone is stupid? His grammar was a giveaway as well His ad says only to class III or higher. What is higher??
  3. FOR SALE are six 30rd Grease Gun mags. Yes, they are not the prettiest girls on the block, but they perform. The price is $30 each + shipping cost. I can ship 1 to 6 mags for $15. Please post here how many you want and email me at 458socom@comcast.net for more info. Thanks, Dan
  4. FOR SALE are two 10rd mags for the Grease Gun or MAC-10 45. These mags are parked in excellent condition. The price is $30 per mag + shipping cost. Please email me at 458socom@comcast.net for more info and pictures if needed.
  5. M3 bolt cocking unit complete was $75, now $50 + shipping cost. Please email me at 458socom@comcast.net for more info and pictures (if needed).
  6. M3 or M3A1 barrel and barrel nut complete for $200 + shipping cost. Barrel made by Marlin. Comes with a thread protector. Please email me at 458socom@comcast.net for more info and pictures (if needed).
  7. M3A1 bolt complete for $200 + shipping cost. Please reply to Dan at 458socom@comcast.net for additional info and pictures (if needed). This item is located in Jackson, MS.
  8. Up for sale is a like new GG bolt M3a1, “FOUR” sets of GI Grease gun Drive springs and extractor drive tool. Springs and tool are all NOS!!!!! $250 for all shipped. Will not split.
  9. WTS. 45acp 230gn (600rds) ammo.

    Up for sale is 600 rounds of 230 grain FMJ ammo. Brand new in boxs. 300 rounds of Winchester and 300 rounds of S&B ammo( not in picture) $420 shipped. Will not split. Ammo all brass cased and copper jacketed. Factory new fresh!!!
  10. I have for sale as shown in pic: A) Stevens Butt Plate $6.00 SOLD B) Browning Butt Plate $8.00 SOLD C) Colt (Marked Colt) 38 Super Mag, Excellent Condition $20.00 SOLD D) H&K Conversion Kit, Converts your Full Auto Friction-Sear Trigger Pack to a Smoother Roller Sear and Roller Sear Trip Set up. $40.00 SOLD E) M3A1 (Grease Gun) Mag Latch Assembly $6.00 SOLD F) Steyr Aug Saw Cut Receiver Pieces $50.00 SOLD ** THIS POST IS CROSS POSTED ** Shipping Extra ( I will get you actual Shipping) I will Accept as payment US Postal Money Order or PayPal (Discreet as a Gift Only, Friends and Family) First "Ill take it" in this thread gets it followed by a PM to ME WITH YOUR NAME AND MAILING ADDRESS. Caveats Don't Count Please any Questions or Comments PM Me. Thank you for looking, Murray Over in Carolina
  11. MAC-10 Cobray and Grease Gun M-3 Magazines Asking $425 The 15 magazines (.45 cal.) from left to right are: Five - 30 round M-3 grease gun magazines modified to fit a MAC-10 .45 (Military Armament, RPB, etc.) Six - 30 round M-3 Grease Gun magazines. Stamped SPW GL C-153427 Four - 40 rounds MAC-10 original Cobray magazines. Magazines are stamped with the Cobray emblem. $500 plus $30 shipping. Firearm(s) or accessories in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. Accessories will be shipped to buyer. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant.
  12. WTS:: M3A1 Grease Gun

    WTS: Medea M3A1 Grease Gun Fine shooting, quite rare, cal .45 piece. Very controllable rate of fire, excellent for close quarter action, or to fill that empty gun rack in your tank. Telescoping wire butt stock. Flash hider included. $21,000 + s/h, transfers tax-exempt Form 3 to your licensee/SOT or tax-paid Form 4 to non-prohibited individual in state of Arkansas (fully transferrable) Comes with three mags and GI canvas mag pouch.
  13. Beautiful Guide Lamp M3A1 Grease gun with SCRC integral suppressor. This gun is a Pre-May dealer sample, this is not transferable to individuals. Pre-May guns can be kept after you drop your SOT. This is a nice example of the war ear submachine gun. The gun includes the original GL barrel, 1 magazine, and the SCRC integral suppressor. Both are on our books and ready to transfer via E-File upon payment. $10,500 CC+3%
  14. barrel and barrel nut $185.00, Bolt complete with recoil rods and springs 175.00 WW2 era mags, in waxed wrapping 40 ea. Other era's available also new in appropriate marked original packaging wire stock 45.00
  15. WTS: M3 Grease Gun Parts Kits I have several very hard to find USGI M3 Grease Gun parts kits available for sale. The kits have been de-milled via torch cut and are in uncleaned condition. Each includes overlapping sections making these ideal for display / dummy gun builds. Each kit is as pictured. I have both Ithaca as well as Guidelamp examples available. Price: $400.00 each **Bulk pricing available for multiple kits / components** - Shipping: Actual Price - Contact: PM or email at bevisblack15NOSPAM@yahoo.com (remove NOSPAM) Payment: Standard PayPal plus the fee or USPS money order
  16. A total of four USGI NIW grease gun mags for your consideration. Two were removed from the sealed wrap, but are still wrapped in the grease paper. I peeked in the top and those two are nicely blued. All mags came from the same lot, so all four should be blued. New USGI mags are becoming increasingly difficult to find. $160 for all four magazines delivered where allowed. Shipping via USPS Priority Mail is included with the price. Checks, Credit cards ok. Questions? 702-763-1269 after 8:00AM Pacific time. Email to VegasSMG@gmail.com
  17. WTB M3a1 Grease Gun Bolt

    Looking for a decent M3a1 Grease Gun Bolt. Ty in advance.
  18. Looking for an excellent or better condition M3A1 bolt.
  19. This is a M3A1 Guide Lamp Grease gun dummy made from a real gun at one time. It has the piece that was cut out that goes with it also. The gun has a steel tube slid inside of it and welded in place to make it a non-gun. The door still opens and stock pulls out as originality did.The barrel has a dummy barrel made from a steel rod that has been drilled for about two inches to make it look real. This is a very nice item for a display or wall hanger for that gun shop, office, or man cave.Of course a SOT holder could make it a firearm again if he wants.Anyway this is a non gun for display or for parts use.Like I said it is a Guide Lamp Made. Price is 1200.00 shipped to you. Any questions please ask. Thanks for looking.
  20. I have three hard to find USGI M3 Grease Gun parts kits available for sale. As you can see in the photos the kits have been de-milled and are in uncleaned condition. Each includes overlapping grip and receiver sections that make these ideal for display / dummy gun builds. There are a variety of markings visible on the parts including ordnance acceptance stamps and GE Guidelamp marks. -Price: $300.00 each -Shipping: Actual price -Payment: Paypal plus the fee or USPS money order -Contact: PM or email me at bevisblack15NOSPAM@yahoo.com (remove NOSPAM)
  21. We are looking to sell a used but in great shape Guide Lamp M3 full auto grease gun 45 caliber. This is a post 86 dealer sample and will require the buyer to have a SOT and a law letter for purchase and transfer of this item. Please look at the pictures below we are asking $6,500. Feel free to contact us at wabrams@sgc-scottsdale.com or 480-688-7076.
  22. I'm in the market to buy a USGI Thompson M1 or M1A1 or a M3 or M3A1 Grease Gun. Not looking for any rare museum quality pieces. This will be a shooter. I'd like to do a 50/50 payment and have plenty of references from dealers and other board members, as well as 100% positive feedback on other forums. Obviously I prefer a gun in state (FL) or on a form 3. Not interested in West Hurleys or Medea guns. Please e-mail me at matthewtroccoliesq (at) gmail (dot) com
  23. Have 16 Grease Gun mags for sale. They all have spotty surface rust but function.