Search the Community

Showing results for tags 'dias'.

Found 6 results

  1. Immaculate Colt AR15 SMG in the RO635SD configuration with registered DIAS. Utilized by the DEA, a modified model 6450 with an integral suppressor made by John Norrell Arms. This suppressor model had a front sight post at the regular 635 sight-radius but had a modified M16A2 hand guard that shrouded the suppressor several inches past the sight post. The sear is manufactured by JCB, serial 1 and is not married to the weapon. This is a two stamp weapon on Form 4's. $35 shipping.
  2. * Brand New in the Box MAC 10/9mm, marked INGRAM M10A1, they are 9mm. These are Texas MAC's that were purchased at auction by SWD (same people who made the M11/9's) as unfinished receivers. SWD then completed these guns & properly TIG welded them together (unlike the Texas built guns that were only spot welded & have been know to come apart). These are great shooters as they do run slower that the M10 45's, M11 9's & M11/380's These guns are registered in 9mm & 45 ACP but are set up in 9mm. These guns come w/ all the factory accessories as pictured metal mags can be purchased from Jerry Prasser @ Recon Ord, $6995.00 http://www.dndguns.com/images/mac10-9.jpg * FN FNC-K, custom cut down FNC Paratrooper, comes as pictured w/ folding stock & MP5K K-grip. Gun runs good on PMC ammo. You cannot run a suppressor on this gun as it creates too much back pressure & breaks the hammer, call for details, priced accordingly $12,995.00 http://www.dndguns.com/fn-fnck.htm*Tippman 1919, Here a great little item that any 22lr or miniature collector would love to have. This is a 1/2 scale minature of the Browning 1919 machinegun. This gun was manufactured by Tippmann Arms Company back in the 80's it comes as pictured w/ hardwood transit case, 2 - 1/2 scale metal ammo cans, 1/2 scale tri-pod, pintle & T&E. It even has a miniature manual. gun is in beautiful condition, click on the pictures below for a closer look. These are getting VERY HARD to find now-a-days. If you have any questions let me know. $22,500.00 http://www.dndguns.com/tippman_1919.htm*Colt M16-A1 set up in 9mm w/ all Colt parts from a post sample Colt SMG (except for Hahn Machine mag block. Gun runs perfect & is in nice shape. Comes as pictured w/ Magpul stock & 1 factory Colt mag. $27,995.00 http://www.dndguns.com/colt_m16_9mm.htm Note deduct $1000.00 from price if you dont want the 9mm parts, just the complete Colt M16A1 223 lower* Colt M16-A2, “BURST” marked, excellent original condition, $30,995.00 , http://www.dndguns.com/colt_m16a2.htm * Wilson Arms Company AR15 / M16 DIAS (drop in auto sear) These are getting very hard to find now-a-days. These will make any of your AR15's select fire. This is one of the best made due toit's steel construction. $32,500 http://www.dndguns.com/ar15_dias.htmGeorge Denkins / D&D Guns304-562-7699www.dndguns.com
  3. MP5SD clone with TPM Suppressor and Transferable Fleming Sear SPF Registered in All Calibers so you can move to any host you want for this will be a one or two stamp transaction depending on state you live in buyer pays all fees shipping etc. The gun is registered as a pistol the HK Fleming Sear is on a form 3 and the TPM can is on a form 4. The gun will come with one HK German 30 round magazine and comes with the A3 stock and Navy SEF trigger group. The sear will transfer on a Electronic Form 3 which have supposedly been taking only a few weeks to clear. **A2 stock used for picture reference only.** The gun was only test fired a few rounds the Sear pack has only been test fired a few rounds and the TPM can has only had a few rounds tested through it the gun/sear/can are virtually brand new. There may be a few guys who will vouch for me on here What is included in this package: 1x Registered Fleming Sear Pack Registered in all calibers currently set up in 9mm Electronic Form 3 Transfer 1x SW MP5SD Pistol transfers immediately 1x TPM SD Suppressor Form 4 1x A3 Adjustable Stock 1x SEF Navy Housing 1x Full Auto Carrier and Bolt Group 1x 30 round HK German Curved mag
  4. I have an aluminum Broadhead Armory RDIAS on a form 4 in Utah that I am looking to sell to fund another project. I will also include the POF lower with all the F/A internals (Gieselle trigger and KNS antiwalk pins). Asking $30,000 Willing to take partial trade for Desert Tech rifles, lightning link, or other autos up to half the value of the RDIAS. I'll get some pictures up in a few. Please let me know if you need more information or have specific requests. Thanks Chris
  5. This is a JCB drop in auto sear. This is one of the hardest NFA pieces to get and they rarely come up for sale. This one is all steel, not aluminum. You can legally put this into nearly any AR15 style rifle and shoot full auto. This item is registered in KY on a form 4. The first transfer to your FFL/SOT will be paid on this end. This was purchased from Neal Smith a few years ago by me. It runs 100%. I will ship it to your FFL/SOT for $29,900. All NFA rules apply. You can contact me at rext269@aol.com or call me at 859-361-9444. Thanks for looking, Rex Tyson Kentucky Firearms FFL/SOT
  6. This is a JCB drop in auto sear and Colt 9mm host. You know what you are looking at. This is one of the hardest NFA pieces to get and they rarely come up for sale. This one is all steel, not aluminum. You can legally put this into nearly any AR15 style rifle and shoot full auto. This item is registered in KY on a form 4. The first transfer to your FFL/SOT will be paid on this end. As a bonus you will also receive a very nice Colt preban 9mm host. The scope pictured does not go with it. This rifle by itself is NOT an SBR and not subject to an NFA transfer but must ship with the DIAS installed. This package was purchased from Neal Smith a few years ago by me. It runs 100%. I will ship it to your FFL/SOT for $31,600. All NFA rules apply. You can contact me at rext269@aol.com or call me at 859-361-9444. Thanks for looking, Rex Tyson Kentucky Firearms FFL/SOT