Search the Community

Showing results for tags 'cobray'.

Found 21 results

  1. I sold off my M11 A1 to a form member here, so its time to get the suppressor sold. I realize my only real market is here in OKLAHOMA where the suppressor lives, and that the stamp is worth more than the suppressor. If you're looking for an era-appropriate suppressor for your Mac 11 in .380 with the correct threads, this is your lucky day! SWD inc / Cobray .380 Form 4 in Oklahoma City $150 OBO. Happy to sell out of state but obviously that'll require two stamps...
  2. WTS: SWD Cobray M11 NIB

    SWD Cobray M11 9mm NIB. These are consecutive serial number guns $7000 each. We are willing to sell them individually or as a set. In stock ready for transfer. These guns have been in a private collection since 1987. Buyer is responsible for shipping fees. Please contact me with any questions. Justin Bupp justin@athensgunclub.com 706-546-6111 115 Mill Center Blvd Athens, GA 30606
  3. Hatton Industries S-701-SMG. Jersey Arms Works Inc. .45ACP Like new in factory box. $6500 In stock ready for transfer. This gun has been in a private collection since 1987. Buyer is responsible for shipping fees. Please contact me with any questions. Justin Bupp justin@athensgunclub.com 706-546-6111 115 Mill Center Blvd Athens, GA 30606
  4. Selling my S.W.D. M11/9 in the box. It runs excellent, currently in F/A per CT law. Includes Cobray marked mag loader, 2/32 rd mags, barrel cleaner rod, LAGE extended safety switch, reproduction front strap and owners manual. I can't sell the hi-capacity mags to CT residents unless there FFL or LEO. Currently on a form 4 in CT, inspections and gun located in Tolland. Looking for $7500 +shipping+stamp. Not looking for trades. Serious inquiries message me gtaforever88@yahoo.com Also with popularity with LAGE uppers I could sell the gun without the upper receiver. Message me. https://imgur.com/a/V9HfcIk
  5. Selling my RPB overstamp M10 w/ RPB suppressor package. The gun and suppressor is in .45, runs in excellent with any ammo you put in it. The gun has the LAGE oversize safety switch and a new aftermarket front strap recently added. The suppressor is a RPB ( non matching serial number to gun) stamped that has been upgraded by Tom Bowers to a wipless modern version and a grip-tastic was added for handling control. Included with the package is a rare Cobray camo travel bag, barrel extension, 2/30 rd mags, 1/35 rd mag, 1/10 rd mag, mag loader, reproduction manual, and the original safety switch. The gun is configured to Full Auto only per CT law. Currently on a Form 4 in CT. Looking for $7200 for the package. $6800 for just the gun and silencer. Stamps and shipping extra. 50/50 ok. I can not sell the hi capacity mags to instate CT residents unless your FFL or LEO. Serious inquiries, message me directly gtaforever88@yahoo.com. https://imgur.com/a/QR2f3r6
  6. I'll probably regret selling this, but up for consideration is my SWD ( Cobray ) Mac M11-a1 chambered in .380 - LARGE MAGWELL Matching SWD (cobray) .380 Suppressor Each on a Form 4 in Oklahoma. This gun has been fired, but not abused. Low round count from me (less than 500). Accessories include: 1x FTF Industries: M-11 380 SMG Threaded Barrel (Improved Chamber) (installed in side-cocking upper) 1x Masterpiece Arms: 9mm Full Size Side Cocking Upper (trimmed to fit .380 lower) LAGE: Hardened Seer (not installed yet) LAGE: Improved Extractor (not installed yet) LAGE: internal safety slide (not installed yet) LAGE: 2-Piece Molded Grip with Thumb Activated Magazine Release (Large Magwell) INSTALLED 2x Original Magazines (i forgot to take pictures) 1x Shockwave 30-Round ZMAG for M-11/9 and SWD M-11A1 .380 ACP (From LAGE) 1 SET: Barrel Wrenches NOTES: Barrel is installed in side-cocking upper but has not been pinned yet. Sidecocking upper has a small gap at the rear of the bolt because of the larger ejection port for 9mm. Previously owned by "ROY" in Oklahoma (many of you know him from deals on STG). **** FULL LIST OF HIGH QUALITY IMAGES CLICK HERE **** $7,000 for all obo. **** FULL LIST OF HIGH QUALITY IMAGES CLICK HERE ****
  7. Selling for my friend who is a Class 3 dealer Transferable, PD trade-in gun, very small block lettered PD markings, overall VG+, likely not shot very much by the PD. Been in safe since 1990, test fired by me a few times over the years, but I haven't shot it much either. The white markings are just "white out", will come right off. Will come with one mag. $7500 plus shipping and insurance *Payment gets you promptly copy of transfer.
  8. 3 good condition factory 9mm 32rd cobray mac11 mags for $100 SOLD
  9. StormWerkz is now manufacturing scope mounts for the M11/9 Cobray pistols. Perfect for mounting red dot optics, works great with the StormWerkz M11/9 stock/brace adapter. No Permanent Alteration to Firearm! $70 For more information and to order please visit our website at www.stormwerkz.com Thanks for the boards Buddy!! Cobray Scope Mount
  10. StormWerkz is now manufacturing stock/brace adapters for the M11/9 Cobray pistols. -Any stock such as Manticore, ACE, Tromix, etc. may be bolted to the adapter with or without a hinge. -Ar-15 type hinges also bolt on allowing Ar-15 type stocks and pistol braces to be used. No Permanent Alteration to Firearm! $70 For more information and to order please visit our website at www.stormwerkz.com Thanks for the boards Buddy!! Cobray Brace Adapter
  11. If you're reading this then you already know what you're looking at. The KG-9 was only made in 1981-1982 with only around 2500 produced. It is blowback operated and operates from an open bolt position. This one is in GREAT shape with only light but typical handling marks. This is an INCREDIBLE package deal that includes FIVE magazines, an Interdynamic soft case, AND an original Interdynamic assault grip! FOR SALE: $2400 + $45 Shipping to your FFL dealer (local pickup is free) Shipping includes insurance and will require an adult signature upon delivery. PLEASE NOTE: INSTALLING THE GRIP WILL TURN THIS GUN INTO AN AOW WHICH REQUIRES A $5 TAX STAMP WITH APPROVAL FROM ATF. IT BECOMES AN NFA ITEM AND ALL NFA RULES WILL APPLY. Buyer agrees to release seller from all liability, whether criminal or civil, arising from the purchase, ownership, possession, use or misuse of this item. I am not interested in breaking up this set, please do not ask. This firearm is for sale in my store, First Pawn, in Naples, FL where you are more than welcome to stop by and see it in person if you wish. I can accept cashier's checks, money orders, a wire transfer, and even Visa or MasterCard. Please message me with any questions and I will get back to you ASAP. You can also call my assistant, Kendra, at (239) 434-08four1 Monday-Friday between 8:30am and 4:30pm EST.
  12. Looking for a New or Good condition derringer as in the title. Email what you have.
  13. Up for sale is a huge upper lot. You get a like new Usmachinegun Side Charging upper threaded in both 3/4 10 and 1/2 28, New CNC complete Bolt, Original Top Charging Cobray upper, Original Cast Bolt, Wire Stock with hardware, Cobray Front strap, Forward Steel barrel Grip, Front Reciever pin and some misc parts.(All parts pictured) Well over $700 in this!! Selling for $400 shipped. Will not split!! Ty for looking.
  14. Up for sale is (12) Rpb M10/9 smg mags. All are slightly used and the two in red tape might need tweaked! $480 shipped will not split.
  15. Up for sale are Three original small magwell M11/380 mags. They are in great condition. I have 3, all 3 shipped for $150. Will not split. Ty
  16. Cobray Mfg M10 open bolt upper kit, comes with everything pictured. $499 shipped conus. Postal money order or certified bank check please. Text if you need more pics at 702-481-1226, "ALL NFA RULES APPLY". Thanks, Lee Novak
  17. The major drawback of the SWD M-11/9 has always been it's very high rate of fire. It's little more than a bullet hose in OEM form. Over the years, various methods have been employed to reduce the ROF. These have ranged from dismal to very good. Unfortunately, rate of fire reduction has come at the expense of overall size... until now. The CF-W bolts are manufactured from heavy Tungsten alloy. While very close to the density of pure tungsten, heavy alloy provides a unique combination of corrosion resistance, density, mechanical strength, and machinability. This increases the bolt's original weight of 15.88 ounces up to 32 ounces, and reduces the ROF by over half. Easy singles are now possible while retaining the gun's original compact size.The reviews of the first run of 100 have been very positive and they sold out quickly. http://www.mac-11.info/review-cf.htmThe bolts are delivered pre-assembled and ready to drop into your OEM upper or side cocker. Cost for a completely assembled CF-W bolt is $750.00. We now offer $9.99 USPS Priority Mail shipping! Your package is fully insured, so an adult signature is required at time of delivery. Credit cards are cheerfully accepted but their use will add a 3.5% up charge.To order, please call 1-702-763-1269 from 9:00AM to 6:00PM Pacific Time, Monday through Saturday. For additional information please email VegasWbolts@gmail.com. Sorry, no Nevada sales at this time. We have every part needed for an OEM style bolt. These are in stock and ship via Priority Mail for a flat $3.00 charge.*Extra polyurethane buffers are available for $4.50 each. *I'd strongly suggest the purchase of an extra ejector rod for $11.00.*Recoil spring guide rods are available for $10.00 each. *Spare recoil springs $7.50 each. Two recoils springs, $13.25. *I have a few NOS original "hockey puck" style cocking knobs at $15.00 each. *Enhanced extractors are $9.50, extractor spring is $4.50. *OEM style firing pins, $20.00*Firing pin retainers $9.00.*Extractor roll pins, 2 for $2.00.*Recoil/back plates $7.50. Go from this... To this! *A 9mm CF-W bolt for the SWD M-11A1 .380acp buzz guns is now being sold. The future is tungsten!
  18. Looking to purchase an M11/9 SMG parts kit, please email or text me what you have. svtpuke@gmail.com 817-239-7003
  19. I have for sale 2 new receiver flats, one mag well/ trigger guard/ feed ramp, one rear sight and front receiver tab (from NOS "demilled" SWD sub gun). One flat is all ready for a sub build and the other is blank. (ALL NFA RULES APPLY) This is easily a $180.00 value and the receiver flats are very hard to find these days. Good ones like these 4130 steel flats that are spec thickness, are at least $60 ea when you can. Example: http://www.cobray.com/acc-32-cobray-frame-flat-details.aspx Example: http://www.ftfindustries.com/category/MCWP.html $109.00 SHIPPED Conus. I accept Postal MO, PayPal and CC. Add 3% for PayPal and CC. If you are paying via PayPal, give me your registered PayPal email and let me invoice you.
  20. I have for sale a complete new original parts kit for a full auto SWD Cobray M11/9 9mm sub gun. Includes everything but the lower receiver. All you need to replace every part, build a complete gun from a stripped receiver or replace every part of your FA M11/9. The only issue is that the included cocking knob will not fit the bolt due to a pin on the bolt. (see second to last pic) You will either have to remove the pin, drill a hole in the knob or get a replacement knob that already has the required hole. Includes all pictured items and a 2 piece receiver pin not pictured. Includes free original operators manual. See my other listing for a complete lower build set. (ALL NFA RULES APPLY) FTF wants $574.99 for this very same original parts set with CNC machined bolt. See here: http://www.ftfindustries.com/product/ET-SPM11KT-F.html Get mine for $400.00 shipped CONUS. OBO I accept Postal MO, PayPal and CC. Add 3% for Paypal and CC. If paying via PayPal let me invoice you to your registered Paypal email.
  21. I have 7 zytel magazines with a four pocket Cobray pouch that I would like to sell for $170. Thank you, Jack