Search the Community

Showing results for tags 'bushmaster'.

Found 10 results

  1. ACR parts for sale. Components are either Bushmaster (BFI) or Remington Defense (Rem Def). Condition is NOS unless otherwise specified. Shipping is $15. Barrels / Trunnion 14.5" 5.56 NATO with gas piston, spring, and gas regulator, painted Field Drab (30118), includes 51T AAC Flash Suppressor. Barrel nut is for Rem Def non-QD trunnion, but can be changed to QD throw lever to fit standard BFI trunnion - $1200 Lightweight Trunnion, Rem Def. Aluminum, non-QD barrel. - $450 Bolt Carrier Group 5.56 Bolt Assembly, Rem Def. (with Nickel Boron coated bolt, ejector, extractor, extractor pivot pin) - $800 5.56 Bolt Assembly, BFI - $590 Firing Pin, Titanium - $150 Firing Pin Spring- $20 Firing Pin Retainer w/ o-ring - $25 Cam Pin - $25 Action Spring Assembly, Rem Def (aluminum guide rod and rear support). - $300 Action Spring Assembly, BFI - $200 Semi-auto bolt carrier, BFI (slightly used) - $285 Bolt Carrier, Remington Defense Full-Auto (slightly used) - $2100 Stocks / Handguard FDE Side Folding buttstock (used) - $175 Black Side Folding buttstock - $400 BFI M-LOK Handguard - $350 Lower / Trigger Group Extended bolt catch button, Black, Rem Def. - $29 Extended bolt catch button, Field Drab (30118 color), Rem Def. - $29 Rem Def Lower Reciever / Trigger Group, Full-Auto, grey anodized aluminum - $2200 Accessories ACR UTM (Ultimate Training Munitions) Full-Auto Bolt Assembly (used), requires standard Action Spring Assy from original carrier. Includes new UTM AR Magazine - $1500
  2. Bushmaster ACR Pistol with Remington Defense components. $8900.00 (including shipping) Upper Receiver: Special ordered from Remington as a painted but unassembled receiver, as ACR pistols were not available in 2018. BFI, Ilion, NY markings. Internal Guide Rails: Remington Defense 4 piece rails. Rear bolt guide rails are steel with lightning cuts, forward actuator rails are hard anodized aluminum. Phosphate coated screws (Yes, even the screws were different on Rem. Def. ACR's.) Actuator: Remington Defense lightweight aluminum actuator and folding charging handle. Charging handle latch plates installed on both sides for LH / RH operation. Right side charging handle also included. Bolt Carrier Assembly: Remington Defense bolt carrier with internal buffer weights. Remington Defense 5.56 Nickel Boron coated bolt assembly (bolt, extractor, ejector, extractor pivot pin). Remington Defense Action Spring Assembly (aluminum guide rod and rear support). Trunnion: Remington Defense, made from aluminum instead of steel to reduce weight. It does not utilize the BFI quick change barrel. Barrel: Remington Defense 10.5" 5.56 NATO, FNC (nitrocarburized), 1-7 twist, hammer forged. Barrel is NOT marked BFI. Gas regulator with 'U' and 'S' markings. AAC 51T Flash Suppressor Handguard: Remington Defense aluminum with ACR PDW hand stop. Lower Receiver: Remington Defense lightweight magnesium lower with upgraded internal components: Nickel Boron coated bolt stop, extended bolt stop button, lightened magazine catch, stronger magazine catch spring, semi-auto ambidextrous selector with removable paddles, removable pistol grip, lightweight trigger guard. Trigger: Geissele 2-stage Rear Adapter / Endplate: Remington Defense side folding with AR receiver extension tube (1 of 3 known to exist). Currently equipped with an SB Tactical SBA3 brace. Remington Defense QD sling socket replaces the footman's loop. Sights: Magpul M-BUS (Tan ACR specific color) This is what the BFI ACR could have been. Personal sale. Must ship to an FFL. USPS MO, Check (held until cleared), and some online payment types accepted. Message for additional details.
  3. This is a transferable registered receiver M16. Bushmaster/BFI in Maine obtained EA J15 aluminum receivers from Essential Arms in Louisiana in the 80s and machined and registered them as select fire registered receiver M16s back when Bushmaster was making their own Gwinn Bushamster steel sheetmetal semi and select fire guns of their own design. It is very nicely milled and drilled by Bushmaster in the 80s even if the stamping of their name and address wasn't the prettiest. The pin holes are nice and tight, it was fired very, very little back in the 80s and just sat in the safe for 30 years. The gun has been here in Texas on a Form 3 for over 30 years but no longer have a FFL so it will transfer on a Form 4. The price is $18K SOLD.
  4. FS: Bushmaster M17s - VERY LOW Serial number # 00815 Caliber .223 - 5.56mm Barrel 21" (this is from memory - i can measure) Factory Gas Piston system Modified trigger assembly - I machined an aluminum carrier for a ball-bearing to make the trigger operation smoother. the ONLY one of its kind. Ambi mag release. Takes Pmags (not included) Very low round count. $950 OBO NOTE: This firearm is capable of loading a "high capacity" round magazine. I do not ship to: CA and all other firearm unfriendly cities, counties and states. I do not ship outside of the Continental US including US territories. BUYER IS RESPONSIBLE FOR ALL CITY/COUNTY/STATE FIREARM REGULATIONS CONCERNING THE LEGAL STATUS OF THIS FIREARM. PAYMENT: I accept VENMO, I can invoice through Quickbooks and accept ACH Transfer SHIPPING: $35.00. USPS Priority Mail with tracking to your FFL. Shipping insurance is not included.
  5. Condition is new, take off from factory build. Bushy test fires their uppers as might be witnessed by oil, but no brass marks on the deflector and has not been shot by a customer. This one fit tight. . e-mail me at or call . I will accept checks, pay pal, money orders, cash, CC payments over the phone. ITEM IS SOLD THANKS
  6. We have 4 Bushmaster M-16 parts kits with complete uppers for sale. Kits will come with everything needed to put on to your registered lower receiver and start shooting. Barrels are chrome lined 14" 1/9 twist, and all uppers will have an A.R.M.S #40 flip up sight. All uppers will also have surefire M500A hand guards. All items appear to be in good useable condition. Price is 650.00- SOLD!!
  7. NO LONGER AVAILABLE ACR 16.5" fluted barrel assembly. This barrel is new, but has been handled and is a nice fluted model.... not the ones Bushmaster made from standard M4 barrels Thanks for looking, James FFL in SC
  8. NO LONGER AVAILABLE Superb custom camo Cerakote finish. Includes: 16.2" custom fluted barrel, vertical grip/bipod, Magpul PTS BUS, P-Mag, single point sling mount & sling, and Bushmaster hard case. Shown with short barrel, but NOT included unless purchased as SBR. The custom finish on this piece is really nice, the colors blend together great. The camera flash made the tan and black jump out more, so picture is not a good representation of the actual look. Note: This has a nice custom fluted barrel, not like the like the original ones with the standard M4 contour barrel. Original factory barrel is available if desired. Shipping to Continental US (insurance extra). Cashier's check (preferred), company/personal check (held until cleared) . Thanks for looking, James FFL/SOT in SC
  9. NO LONGER AVAILABLE Custom camo Cerakote finish with custom 12.5" fluted barrel. Includes: custom 16.5" fluted barrel assembly ($550.00 value), vertical grip/bipod, Magpul PTS flip up sights, P-Mag, single point sling, and Bushmaster hard case. Original factory 16" M4 style barrel is also available. Payment by Cashier's check (Preferred), USPS money orders, company or personal checks. Shipping to Continental US (other destinations extra). Thanks for looking, James FFL/SOT in SC
  10. For sale is my Bushmaster SBR semi-auto Carbon-15. I am the original owner and converted it from a pistol. It comes with the original box, manual, and accessories from bushmaster along with all the original parts. Its on a form 1 in Florida. Buyer pays all ATF fees and shipping. Asking $400.00 email me at jlaskowsky73@gmail.com or (813)545-3257 for pictures