Search the Community

Showing results for tags 'bar'.

Found 39 results

  1. Semi - auto Vickers

    Life is requiring some changes. For sale is a virgin, unfired semi-auto Vickers built by Midwest. I've had it a couple of years now and been just looking at it, never fired. No scratches, etc. Ships in it's original, great shape transit chest (interior is good, no busted blocks), tripod included in this sale and 16 cloth original Vickers belts. Everything is heavy, FTF is awesome will drive a couple hrs to make that happen. If it ships, honestly would prefer LTL I think and I'll build a crate for it. Vickers kits are now about $4K, tripods $2K+, belts $40+ each, build cost $2.5K plus the wait. Selling at $10,500 (plus shipping if applicable). Major bank cashier's check, cash during FTF or USPS MO only. Will sit here for a few days to a week then off to GB or RIA. Would rather sell here and give a kick-back to the site.
  2. I have an early OOW BAR designed and built by Bob Landies, out of Chardon, Ohio. I have never fired it and bought it from the original owner. It comes with sling, bipod, carrying handle, 7 magazines, take down tool, manual. The web belt is an original WW1, dated 6/18. This rifle will be shipped in a hardcase insured. It has an original U.S.G.I. HSA barrel dated 4-53. FFL to FFL Only. Shipping from NM $150.00 (It's heavy and will be in a hard case and packaged well). Cashiers check or Postal Money Orders only. $6,500 + Shipping FIRM
  3. Carry Handle used $50 Carry Handle (Unwrapped) NOS $60 Carry Handle (Still in Wrap) NOS $60 Early Bipod Complete $250 Early Bipod Head NOS $110 Carrier Assembly NOS $30 Magazine Loader $20 All plus shipping. Will sell separately or $500 for everything shown. PM me if interested.
  4. WTS: Magazines - Thompson, 1941 Johnson, M3 Grease Gun, Sten, MP40, BAR - Excellent I have several lots of magazines available for sale. They are all in excellent condition but may show light storage / general wear. See photos for condition. Contact with any questions. Price: As noted Payment: Paypal plus the fee or Venmo only Shipping: Actual Cost Contact: PM or email at bevisblack15NOSPAM@yahoo.com (remove NOSPAM) Thompson: 12 total mags, 10 Seymour, 2 Auto Ordnance. All of these are in excellent condition with only minor storage wear, most are like new. These are all military surplus and as such have the proper unmodified circular holes in the spine. These are almost impossible to upgrade, perfect for shooting or display. Price: $480 OBO - spf M3 Grease Gun: 5 total mags. These are in nearly new condition with some light rub marks / storage wear. They may have had a few rounds through them but it doesn’t show. Perfect for display / use. Price: $220 OBO - spf 1941 Johnson LMG Magazines: I have a pair of these available. They are 25 round mags in nice mechanical condition. The exterior finish shows some staining but they look to never have been used. Perfect shooter mags or very nice for display. Price: $100 OBO MP40, BAR, Sten This is a small mixed lot consisting of 1 each BAR, Sten, and MP40 mags. Both the Sten and BAR mags appear to be original GI issue, the MP40 looks aftermarket (no exterior markings). They are all in nice shape and would make perfect users. Price: $60 - SPF Cross Posted
  5. Machineguns for Sale

    I'm giving up my SOT and have several machine guns available. Email me at brian@freestateservices.com M3A1 (Keeper) $14K (new) MG34 (Keeper) $15K BAR (Keeper) $16K FN FAL (Keeper) $15K HK UMP40SD $6000 (Rare HK imported can) HK MP5 (2) $ Missing parts - No letter Post Sample MP5 Clone $3K No letter Post Sample MP40 (Keeper) $12K MPK (Keeper) $7K MPKL (Keeper) $7K Stemple w/can $8500 (Transferable) Stemple $8000 (Transferable) Mac 10 .45 w/can $12K (Transferable) NEW Steyr Aug $28K (Transferable) NEW H&K 51 $38K (Transferable) M16 - SENDRA $23K (Transferable) AK47 Under Folder $24K (Transferable) RDIAS Sear $1K Postie I also have some pistols with suppressor and more coming. Most are in my inventory on Form e's. I will e*File. Any questions, let me know.
  6. A beautiful piece of history. Developed and introduced in 1917, the 30-06 cal Browning Automatic Rifle is regarded as one of the best shoulder-fired automatic weapons of World War I. By original conception, the BAR was to be used by actively maneuvering infantry units, allowing them to provide their own suppressing fire while advancing across no-man's-land and still be capable of aimed single shots. American infantry doctrine did not embrace the "marching fire" concept, instead focusing on the "squad automatic" concept, favoring man-portable weapons firing from fixed positions in support of defense and maneuver, with later variants of the BAR, the 1918A1 and A2, adjusted to better accommodate this style of combat. A relative late-comer for World War I, the BAR made a good impression on users and allies. Retained in government arsenals following the war, the BAR remained a gold standard of small arms firepower, while also gaining infamy for it's desirability to criminals; famous outlaws Clyde Barrow and Bonnie Parker were among those who raided government stocks for the BAR and used them to great effect in altercations with the police. On entering World War II, the BAR was America's prime light machine gun, and BAR gunners were a key source of firepower for Army and Marine units. While eventually retired in favor of weapons designed explicitly for the Squad Automatic rifle, the BAR served with dignity for many decades, seeing U.S. use as late as the Korean War. Blade front and folding ladder rear sights, with a plain tubular flash hider threaded to the muzzle, "18" dated barrel, and "eagle head" and "flaming bomb" proofs on some components. The top of the receiver bears the 5-line Winchester nomenclature, with the early "F A S" pattern (semi/full/safe) selector mechanism with the spring loaded catch to keep the operator from accidentally putting the rifle on "SAFE" when switching to full-auto operation. Fitted with a deeply checkered forearm and a smooth pistol grip stock. Included with the lot are 3 magazines, original 1918 cupped ammo belt, BAR oiler and magazine loader. Very good condition. The rifle has been completely reworked by Stan Andrewski and functions flawlessly. The forearm bears a hairline crack and a safe ding on its right side. The stock is in excellent shape without any repairs. Mechanically excellent condition with original internal components bearing a “W” proof mark as shown in the attached photos. This item is restricted as a National Firearms Act (NFA) and is fully transferable. It is also classified as a "Curios or Relic" (C&R) as defined in 27 CFR, 478.11. Price; $49,500 plus shipping and insurance. First buyer to commit in writing, either by email or text, will have priority to purchase. Full purchase price due with order. The only trade considered is a transferable H&K MP5K-PDW. All NFA rules apply. Questions will be answered in writing via email or text. My email is “BAR at eley.us”. Text number is 614-537-3539.
  7. Item is a Rare, Bushmaster BAR-10 rifle chambered in .308 Win. This design has some very unique features and was ahead of its time with ambidextrous bolt release and some other clever design details. Perhaps most interesting is the use of economical and plentiful, steel FN-FAL magazines! Rifle is in excellent condition and comes with factory original hard case, manual and (2) FN-FAL magazines Price is $1,995 and is In Stock and Ready to Ship! Must ship to FFL. Interested parties please email sales@aresdefense.com Thank you. Geoffrey Herring
  8. I have the following transferable MG's for sale Vector Uzi in all 3 cal 12k Browning BAR 1918A2 Group Industries 27k MP40 Wilson 14K 1928 Thompson WH 16.5k FNC Sear Gun w/burst 14.5k All run ok and all on a form 4 in ohio, 3 mags per gun. All funds up front buyer pays shipping, email for pics or questions.
  9. WTS: Early Colt 1918 BMR

    I have an early C&R Colt 1918 Browning Machine Rifle that I'm looking to sell to fund another project. It has the very rare humpback stock and is British Stamped from WW1, serial # 19499. I have a FOIA on it and it was transferred to me on a Form 4. C&R OK ! Also have many accessories available as well. A very nice gun! 50/50 payments are OK. Buyer pays all transfer fees and shipping. Asking price is $49,900 DLRegisterNOSPAM@reagan.com for any questions.
  10. Looking to buy an Ohio Ordnance Works 1918A3 Semi-Auto BAR SLR. I'm mainly interested in one of the models with a wood stock over the Bakelite, but I'm still interested in both. Let me know if you've got one or know someone who's got one they'd be willing to part with. Thanks!
  11. WTB: Browning BAR

    Looking for BAR for sale
  12. This is a pre-may 86 dealer sample keeper. This gun is in excellent original condition, no rebuild marks in original finish with the original 10-43 barrel. The bore is beautiful, and the throat gauges almost as new in comparison to a new OOW barrel. Original BARs like this don't show up often, if you're looking this is a great example. My SOT is current so this will efile on a form 3. $11k delivered. steve at adcofirearms com
  13. Looking for demilled receivers, complete set or just pieces; also Philadelphia Ordnance 80% Receiver. Direct email only, please: nick.gorgenNOSPAM@gmail.com Remove NOSPAM from email
  14. WTS: Hand Select M1918A2 Browning BAR Parts Kit. Sold, but we have BAR and all other model Browning machine gun parts in stock: (775) 671-7500.
  15. This is the most reliable rifle I've ever owned. I got it from Kent Lomont many years ago and would take it out once every couple of years. It never fails to cycle and go bang. Nice New England Arms BAR with almost no wear on the operating parts, just marks on the take downs from me cleaning it, and rack wear from being banged around in the armory. One notable exception is the bullet hole through the foot of the bi-pod. Bet that hurt! This one is a keeper for when you give up your licenses.Call two zero eight three75-1800 or email.
  16. Very rare to find WWI Colt BAR M1918 extractor. 9.9 times out of 10 these extractors are WWII or post war NES or Royal Typewriter. This one is an original Colt with the C and arrow. It's in excellent like new condition. Correct your Colt BAR up with this one. It's not cheap but you won't find another one anytime soon. Well worth it for your original Colt BAR. $150 shipped.
  17. I have an original WWI Model M1918 BAR barrel. It's very rare to find an M1918 barrel, original from WWI period but even more rare to find one in this condition! Throat measures "0" and Muzzle erosion ".07" which is basically "0" but I round it to 1. How this barrel survived all these years without being shot out is a small miracle. This particular barrel is marked with an "M" which stands for Marlin. It's dated "7 18" which stands for July of 1918. It has the flaming bomb ordnance stamp between the M and date and again on the outside near the throat. Even more intriguing is the fact that this barrel came off a lend lease BAR to England. Markings of .30/062-494" BNP with crown Tons per square is marked near the throat on the outside of the barrel. This barrel is chambered for the original caliber of of the BAR which is 30-06. There are some tool marks where the barrel was installed or removed (most likely removed) at an arsenal somewhere (see last pic). I've seen these tool marks before on many BAR barrels. It's indicative of using a vice that was used to take the barrel off. It's not a huge gash but there are marks indicating such. Now for the best part. The bore is mirror finish. No erosion, cloudiness or frost. Strong lands and grooves which backs up the measurements of TE 0 and ME 1. I place this barrel at a 9 out of 10 ready for your original M1918 Marlin BAR. They aren't making these any more and finding one in this condition is rare as hen's teeth so buy it now before someone else does. I have a "best offer" button but don't insult with low ball offers as this is going to move close if not at the asking price. I'm very familiar with what BAR parts are commanding. Recently at Knob creek I spotted an original Marlin parts kit that the owner wanted $4,000 for. Get it now before it's too late. After all, your registered gun deserves it and it's worth it! Transferable BAR's are now worth north of $30,000! $950 shipped to anywhere in cont. US. Will accept, checks, money order, etc. 3% more for paypal or credit cards. I have many BAR parts large and small so email me what you need and I can let you know if I have it and how much.
  18. SELLING A WWII VINTAGE POST 86 DEALER SAMPLE M1918 A2 ROYAL TYPEWRITER COMPANY BAR FULL AUTO 30-06. THIS IS A POST 86 DEALER SAMPLE AND WILL REQUIRE A SOT AND LAW LETTER TO PURCHASE. PRICE IS $10,500. PLEASE CONTACT ME AT WABRAMS@SGC-SCOTTSDALE.COM FOR ANY QUESTIONS.
  19. WTB: 1918A2 BAR complete Gas Tube, Late Type, Single Notch, BAR. BAR Late Model, Single Notch, Gas Tube Assembly, with regulator and swivel. Condition: Worn out or serviceable US GI (complete) or bare if that's only what you have. WTB: 1928A2 BAR charging handle complete, new or used WTB: 1918A2 BAR barrel (worn out or serviceable) complete I am putting together a display replica non-firing 1918A2 BAR, so looking for reasonable parts that do not have to be serviceable, but complete to make a correct period replica display BAR. Your help is appreciated. Thank you. contact me at incountry1@yahoo.com please
  20. Browning BAR parts for sale ! ! ! I have all sorts of things from the mundane everyday item to rare one-ofs. Lots of spares to keep your BAR running, some NOS parts, accessories. Basically everything but the receiver (and I'm selling those too but cut up in little chunks!) Browse around at http://www.WWIIBARMAN.com and enter code STURM for 15% off any internal receiver part from this sub category: receiver Internals Stock up on hammers, bolts, springs, links, the unsexy internal parts that keep your machines plowing along year after year. These are part of my 20 year personal collection, I'm selling off everything down to one example of each part, everything is hand picked and accurately described, what you see is what you get. Thanks Buddy and David for keeping the site going!
  21. I have an excellent as new M1918 colt manufactured slim profile BAR barrel with date stamp 1 19, the bore is bright and shinny sharp lands and grooves, there is no throat wear and the crown is as factory new. $1350 shipped in CONT US, USPS money order, certified bank check, personal check (checks have to clear ) Insurance is extra....
  22. I am interested in Swedish BAR Kg m/21 and Kg m/37 parts & accessories.
  23. Looking to buy an original Marlin Rockwell 1918 BAR barrel.