Search the Community

Showing results for tags '5.56'.

Found 33 results

  1. Bushmaster ACR Pistol with Remington Defense components. $8900.00 (including shipping) Upper Receiver: Special ordered from Remington as a painted but unassembled receiver, as ACR pistols were not available in 2018. BFI, Ilion, NY markings. Internal Guide Rails: Remington Defense 4 piece rails. Rear bolt guide rails are steel with lightning cuts, forward actuator rails are hard anodized aluminum. Phosphate coated screws (Yes, even the screws were different on Rem. Def. ACR's.) Actuator: Remington Defense lightweight aluminum actuator and folding charging handle. Charging handle latch plates installed on both sides for LH / RH operation. Right side charging handle also included. Bolt Carrier Assembly: Remington Defense bolt carrier with internal buffer weights. Remington Defense 5.56 Nickel Boron coated bolt assembly (bolt, extractor, ejector, extractor pivot pin). Remington Defense Action Spring Assembly (aluminum guide rod and rear support). Trunnion: Remington Defense, made from aluminum instead of steel to reduce weight. It does not utilize the BFI quick change barrel. Barrel: Remington Defense 10.5" 5.56 NATO, FNC (nitrocarburized), 1-7 twist, hammer forged. Barrel is NOT marked BFI. Gas regulator with 'U' and 'S' markings. AAC 51T Flash Suppressor Handguard: Remington Defense aluminum with ACR PDW hand stop. Lower Receiver: Remington Defense lightweight magnesium lower with upgraded internal components: Nickel Boron coated bolt stop, extended bolt stop button, lightened magazine catch, stronger magazine catch spring, semi-auto ambidextrous selector with removable paddles, removable pistol grip, lightweight trigger guard. Trigger: Geissele 2-stage Rear Adapter / Endplate: Remington Defense side folding with AR receiver extension tube (1 of 3 known to exist). Currently equipped with an SB Tactical SBA3 brace. Remington Defense QD sling socket replaces the footman's loop. Sights: Magpul M-BUS (Tan ACR specific color) This is what the BFI ACR could have been. Personal sale. Must ship to an FFL. USPS MO, Check (held until cleared), and some online payment types accepted. Message for additional details.
  2. Premium Black Hills - Red Box - Factory New Production (Not to be confused with Factory Reloads - Blue box) .223 Remington 55 gr. Full Metal Jacket Ammunition. 1000 rounds case (20 boxes of 50 rounds each) at $419.00 Per Case + Actual Ground Shipping cost, 10 cases available. This ammunition sells on Brownells for $670/case when available. Safe for use in 5.56 NATO chambers. Superb all purpose ammunition produced by one of the best ammo manufactures in the country. Brass cases are boxer primed and re-loadable for additional value. Due to shipping constraints or state laws, I will not ship to CA, CT, AK, DC, HI, MA, NY, PR. Other restrictions may apply, please know your local laws and restrictions before purchasing. Ammunition sales are final. Adult Signature is required at time of delivery. Local pick-up may be arranged. I accept USPS and Western Union Money Orders, Apple Pay, Paypal (gift), Venmo. Money Orders from other issuers and checks are also accepted, orders will ship once funds clear bank. All orders ship within 1 business day of funds clearing.
  3. For sale - like new (<300 rounds) MM23E. Includes a new SEF lower (semi) and the pictured Navy lower (housing only.) This gun is semi-auto but can be used as a registered sear host. Will ship to your preferred FFL. Asking $13k shipped OBO (No trades.) I am not interested in parting out any of the accessories, please do not ask. Includes the following - -MM23E -2 x quick-disconnect barrels -Belt box -M249 ammo pouch (nutsack) adapter -4 x M249 ammo pouches -Spare barrel bag -Tri-pod mount adapter Please PM me with any questions. Thanks.
  4. Ares Shrike upper belt feed upper modified to work with an SWD AR15 Lightning Link by m60joe three years ago. $4200.00 shipped in hard case comes with nut sac adapter, buffer spring, manual 3 - 200 rnd ammo boxes. Fits on ar15 lower works on semi lower auto lower or a lower setup with lightning link (auto) quick detach barrel.
  5. 2 AWC Optima 5.56mm Suppressors on Form 3 $150 each Shipping - $50.00 This package contains Two AWC Systems Technology, Phoneix, AZ suppressors for 5.56mm caliber. These are the popular OPTIMA models. Threaded for 1/2"-28tpi (M-16 barrel thread). Firearm(s) in this ad are possessed by, titled to, and will be shipped by John Norrell Inc. These are not being brokered and are not third-party sales. Firearm in this ad will be transferred to a class III dealer on an ATF E-form 3. John Norrell has been a licensed manufacturer and dealer (C-2/C-3) for 35 years and is currently an officer of the U.S. Federal Court appointed in the role as a Special Master administrator to liquidate NFA firearms released directly to us by ATF under court order. All NFA rules apply. Acceptable payment will be in the form of either a cashier's check or a money payable to JOHN NORRELL, INC. This item is listed by, and the website and postings are monitored by E. A. Shelnutt of John Norrell, Inc. When a party offers the full advertised amount, they are automatically the official buyer and any ongoing negotiations or conversations with other parties are no longer relevant.
  6. For sale - Belgian manufacture FN Minimi squad automatic weapon like we used in Desert Storm, for $11,000 - OBO This was imported from Israel by Ohio Ordnance and sold to me in unused condition by them in the early 2000's, with 2 new straight handle FN mfg. barrels, plus 3 U.S. M249 spare barrels and other accessories included. I have fired a few thousand rounds out of it, but am no longer a class III dealer. This fun shooting, military, law enforcement machine gun is in very good condition, fully functional and comes with 3 interchangeable spare U.S. type M249 folding handle barrels, 4- 30 round magazines and numerous 5.56x45mm U.S. links and plastic ammo boxes, original to the gun. Links and spare barrels will NOT be sold separately. This FN Minimi is a POST 86 DEALER SAMPLE machine gun that requires a buyer to possess a current class 3 dealer's license with a law enforcement agency demonstration letter, or class II manufacturer's license. This FN Minimi Squad Automatic Weapon as pictured is available for viewing and purchase by appointment at HAMILTON & SONS FIREARMS in Cottonwood, Arizona, to whom it is registered. For information, please call IDAN GREENBERG at 602-327-2863, or Dan Hamilton at 923-300-4561. THANKS FOR LOOKING!
  7. Up for sale is a fully transferable FNC sear installed in a paratrooper host. Functions flawlessly, burst cam is in perfect shape. Stormwerkz picatinny rail included with the host. The host itself is in nice shape, barrel has been cut to 13.1" and gas tuned for the shorter length. Will run PMAG or aluminum mags, and fires both steel case and brass fine. Price is $13,500 Sear is on a form 4 out of Louisiana and will be transferred to your dealer. Buyer pays tax stamps.
  8. I have for sale as shown in pics a Silencerco Specwar 5.56mm Suppressor. Suppressor is New in Box and includes a Custom Case. $300.00 + Shipping ( Will get you actual Shipping ) Thank you for looking, Murray over in Carolina
  9. FN M249 Saw barrels. Paratrooper and long barrels. 11 paratrooper barrels. Complete with gas block, front sight, carry handle and flash hider. 5 long barrels. Complete with gas block, front sight, carry handle, and flash hider. 10 heat shields for barrels. All look to be in good shape. Have been shot but still very shootable mil surp. Asking $1400 for the lot. Thats $75 per barrel and $20 per heat shield. I prefer PayPal pick up on the way to Knob creek or buyer to pay shipping.
  10. Nice transferable colt 614 this is a FACTORY MG made by COLT not a conversion such as an sp1... Now comes as pictured in modern configuration (less the eotch and the suppressor mount) also comes with all original parts as well! Specs for modern parts setup: Geissele SSF trigger group KNS Pins LMT sopmod stock KAC free float rail Daniel Defense Chrome Lined barrel KAC buffer magpul grip M16 bolt On form 4 in NC and ready for transfer Willing to use an SOT dealer as a middle man if the buyer prefers $22,000 OBO call or text 704- 999 - 3287 https://ibb.co/sWZJ0TK https://ibb.co/fCjqH7H https://ibb.co/Sv9rPyd
  11. AR-15 Full Auto Converted and Fully Transferable. Has the "Retro" Look of the Vietnam Era M16s. Outstanding Condition. Comes with 4 Colt Brand Magazines. Also Comes with a CMMG Radial Delayed Blowback 9mm Upper With a 30 Round Conversion Magazine that you can use with the original lower. No Alterations to the Magwell required for 9mm! Just install the Upper and Shoot 9mm with these Magazines. This is on a Form 3 And will be E-Filed for Immediate Transfer at $19,500!
  12. Original Armalite AR18 magazines, 20-rd, excellent condition with straight feed lips, no dings or dents, lightly used showing typical light cosmetic wear from mag well insertion, work in select fire AR18 rifles and original semi-auto AR180 rifles, lot of 3 mags for $225 plus $12 shipping via insured USPS Priority Mail, best to contact me directly at XANTHUS@ASIA.COM. Thanks for looking. Bob
  13. For Sale: FN FNC machinegun asking $15,700. Registered sear machine gun on form 4 in MD. In good condition, runs well, 5.56/.223 uses AR15 mags. $15,700 includes shipping and tax stamp for first transfer. Wire Transfer, or certified check (will wait for funds to clear before submitting transfer). No Paypal Includes: - 4 position trigger w/ 3 round burst - original FNC para folding stock - custom folding ACR stock (adjustable length and cheek rest) - StormWerkz AR stock adapter type 2 - Silencerco Saker Trifecta Flash Hider - original FNC Flash Hider - B&T Picatinny scope mount rail - spare green mountain barrel (new, never installed) Everything pictured included with sale: https://flic.kr/p/2e1BFDc https://www.youtube.com/watch?v=R6mNBR5ud1s
  14. I’m parting with one of my Stoner 63A’s and am offering it for sale or will consider trade for an excellent condition and original, transferable Maremont M60 plus cash. Item is a Pre-86 Dealer Sample Cadillac Gage Stoner 63A in excellent condition. Configuration is XM-207 with Right Hand feed and 20” Barrel. Includes correct Right Hand 100-Round ammo box with hanger. Weapon was manufactured by Cadillac Gage Co. in Warren, MI and was exported to NWM in Holland. It was then re-imported by Ed Kline prior to May 19, 1986 and is registered with the NFA Branch as a pre-86 Dealer Sample. As such, it can only be transferred to a FFL with current Special Occupational Tax stamp, but can be permanently retained upon giving up FFL/SOT. Gun runs great and is in stock and ready to transfer on an ATF Form 3. Price is $69,995 for complete weapon and I will include 2,500 brand new and original S63 links and an extra 100-round ammo box with purchase. Interested parties, please email to: sales@aresdefense.com Thank you.
  15. FS: Bushmaster M17s - VERY LOW Serial number # 00815 Caliber .223 - 5.56mm Barrel 21" (this is from memory - i can measure) Factory Gas Piston system Modified trigger assembly - I machined an aluminum carrier for a ball-bearing to make the trigger operation smoother. the ONLY one of its kind. Ambi mag release. Takes Pmags (not included) Very low round count. $950 OBO NOTE: This firearm is capable of loading a "high capacity" round magazine. I do not ship to: CA and all other firearm unfriendly cities, counties and states. I do not ship outside of the Continental US including US territories. BUYER IS RESPONSIBLE FOR ALL CITY/COUNTY/STATE FIREARM REGULATIONS CONCERNING THE LEGAL STATUS OF THIS FIREARM. PAYMENT: I accept VENMO, I can invoice through Quickbooks and accept ACH Transfer SHIPPING: $35.00. USPS Priority Mail with tracking to your FFL. Shipping insurance is not included.
  16. WTS : New Full Auto Rated Suppressors Elite Iron has been a premier designer and manufacturer of professional grade firearms equipment and accessories for 15 years. We are especially well known for our professional grade sound suppressors that are designed to provide enhanced accuracy and superior sound reduction for calibers ranging from .17 HMR through .50 BMG, which includes all favorite hunting calibers and wildcat cartridges. The CQC1 was designed with HRT, ERT, SWAT, and military personnel in mind to provide them with a compact and lightweight unit. The CQC1 is rated for .223/5.56. The CQC1 includes the CQC1 tactical brake for rifle attachment $620 normally $775 ___________________________________________________________________ The BATTLEDOG was designed to supply the tactical world with a small effective .30 cal suppressor. There has been increased demand for more knockdown power in close quarter situations and the BATTLEDOG is an excellent choice. This suppressor also works excellent on the 7.62×39, 5.56×45 and .300 Blackout short barrel rifles and greatly reduces the breech blow back on these systems. The 3 piece system includes the BRAVO 1 tactical brake for rifle attachment. $620 normally $775 ___________________________________________________________________ The BRAVO 1 was originally designed for the .308 ARMALITE AR-10 Gas Rifle. This model remains very popular due to its ability to handle a variety of different calibers and applications, including bolt action rifles. The BRAVO 1 uses the BRAVO 1 tactical brake to attach to the rifle, making swapping the suppressor to other weapons a breeze. The multi-caliber ability allows use of .300 Blackout, 6.5, .30-06 and .223/5.56 calibers Breech blowback on semi-automatic rifles is greatly reduced by this suppressor. $636 normally $795 ___________________________________________________________________ The DELTA MOD2 is a direct thread suppressor designed for .223/5.56 rifles only. This more compact design is ideal for close quarters or tight spaces. $576 normally $720 ___________________________________________________________________ Elite Iron strives to help our customers have all the information needed to make the best suppressor choice. Please feel free to call us at 406-244-0234 to ask any questions you might have. Class 3 Dealers: Email Kathy at info@EliteIron.com and mention our ad on Sturmgewehr.com to receive dealer pricing information. Thanks for looking, Kathy FFL/SOT in MT 406-244-0234 www.EliteIron.com
  17. Get a GREAT deal on this closeout SALE! QUANTITIES LIMITED ON SALE PRICES BELOW! No backorders or rainchecks, when they're gone, they're gone! DTI AR-15 16" Flat Top HEAVY PROFILE Complete Upper FLASH SALE $329.99 DTI AR-15 16" Mid Length Flat Top Complete Upper FLASH SALE $329.99 DTI 16'' M4 COMPLETE Rifle Kit FLASH SALE $374.99
  18. WTS: HK 53 $8,000

    A HK 53 CHAMBERED IN 5.56 IN GOOD CONDITION. THIS IS A POST 86 AND WILL REQUIRE A SOT AND LAW LETTER IN ORDER TO PURCHASE. PRICE IS $8,000 IF YOU HAVE ANY QUESTIONS, CONTACT ME AT WABRAMS@SGC-SCOTTSDALE.COM
  19. We have 4 Bushmaster M-16 parts kits with complete uppers for sale. Kits will come with everything needed to put on to your registered lower receiver and start shooting. Barrels are chrome lined 14" 1/9 twist, and all uppers will have an A.R.M.S #40 flip up sight. All uppers will also have surefire M500A hand guards. All items appear to be in good useable condition. Price is 650.00- SOLD!!
  20. WTT Links for brass

    I have a supply of 5.56 links (est 5000pcs), some 50 BMG (est 100 pcs)and some 7.62 links (est 1000 pcs)as well. Looking to trade for 9mm brass. I am looking for 9mm brass and as much as I can get. This could be an ongoing thing if it works out. Condition of links is VG + with dust on them and all have been sorted and hi-graded by hand to remove any rusty or damaged links. Not sure if this is the right place for this, but it is hand loading/ammo related I thought, so I posted here. If you are interested, please contact me at machineguntom4@yahoo.com
  21. M249, ARES Shrike and FN Minimi (or anything else using M27 disintegrating metal links) owners can easily and reliably link .223 and 5.56 ammo belts. This easy to use M27 linker: * holds 25 rounds * has extra space for a starter tab when using a nutsack * has a unique, rotary handle that causes zero friction on the palms while linking * is made from high-grade, durable 6061 T6 aluminum * key components are parkerized * easily transportable at just 18 pounds. * comes with four corner holes for screwing into a board or table. * 100% designed, machined and assembled in the USA FOR PURCHASES: We accept credit card (Visa, MasterCard, AMEX, Discover); PayPal, certified checks, money orders. 1) Call us at 303-819-9847 if using credit card. There is a 4% surcharge for credit card purchases; or 2) You can also send payment via PayPal: https://paypal.me/TMoviel; or 3) Certified Checks/Money Orders can be made out to: Kendall Ordnance, PO Box 4115, Copley, OH 44321 4) Shipping is: $25, via FedEx Ground, but we will accommodate other requests. We are open 9am-6pm EST Mon-Sat.
  22. M60, M134 and M240 owners using standard M13 disintegrating metal links now can easily and reliably link and delink .308 and 7.62x51 ammo belts. Have you tried other linkers that don't work very well? This one works great! Kendall Ordnance's new linker/delinker loads rounds perfectly every time and can be done with one hand. Do you have ammo belts that need to be delinked? Slide the lever forward, press the handle, and the rounds quickly extract. There is no need to change plates. This easy to use M13 linker/delinker: * holds 20 rounds * has extra space for a starter tab when using a nut sack * has a unique, rotary handle that causes zero friction on the palms while linking * is made from high-grade, durable 6061 T6 aluminum * key components are 1095 heat-treated * cartridge guides are heat-treated spring steel * easily transportable at just 15 pounds. * comes with four corner holes for screwing into a board or table. * 100% designed, machined and assembled in the USA Replacement parts are available for the cartridge guides and pusher. It is also available for M27 disintegrating metal links in .223 / 5.56. FOR PURCHASES: $549 + shipping. All questions/orders can be sent to kendallordnancellc@gmail.com. We accept Visa, MasterCard, AMEX, Discover, money orders, USPS and cashier's checks.
  23. Anderson MFG 16" 1/8 5.56 M4 UPPER NO BCG No Charging Handle [D74-A3] Price: $209.99 Anderson’s AOR upper FEATURES 16” M4 Profile Barrel 1-8 twist barrel Railed gas block 7075 T6 Forged Upper Receiver Black A2 Hand Guard A2 Flash Hider NO BCG NO CHARGING HANDLE $9.95 Flat Rate Shipping for as many items as you would like to order. This includes firearms, ammo, and all other products. TO ORDER: click the direct link: or call 866-523-2673 M-Sat 9A-5P EST Thank you, Teresa @ Cope’s 866-523-2673x203 teresa@copesdistributing.com Fax: 937-459-5434 I am available to assist you Tues-Fri 9A-5:15P.M. EST Office Hours/Retail Store Hours M-F 9A-5:30 P.M. Sat 9A-5P EST
  24. This is a brand new in box Adams Arms Tactical EVO 5.56mm AR-15 pistol. This has been upgraded with a Sig SBX arm brace and a Law Tactical folding adaptor. This will include Magpul BUIS sights and one 30 round magazine. Comes with a discrete carry bag. This new AR pistol was added to our piston driven lineup as the next generation of short-barreled options, ideal for close quarters shooting where a more compact platform is desired. This Pistol Includes: Mil-Spec Forged 7075-T6 Lower Receiver, Type III Class II Hard-coat anodized finish, beveled magwell, machined chevrons in front strap Mil-Spec Forged7075-T6 M-4 Upper Receiver, Type III Class II Hard-coat anodized finish, M4 feed ramps, 1913 Picatinny rail flat top with dry lube internal finish and laser engraved T-markings 7.5" Government Contour 4150 CM Melonited Barrel 1:7 twist, Chambered .223/5.56 x 45 mm NATO Pistol buffer tube without adjustable positions A2 Flash Hider 30 round GI Aluminum Magazine Samson free float light weight modular rail system Standard Adjustable Gas Block (3 settings - standard fire, suppressed fire, off) A2 Grip PRICE is $1,195 Shipping is included within the 48 states, payment via USPS money order or Visa/MasterCard with an extra 3% fee.
  25. WTS: DPMS Kitty Kat SBR

    For sale is my DPMS 7" Kitty Kat SBR semi-auto for either .223 or 5.56mm. It is new and never been fired. Its on a form 1 in Florida. Buyer pays all ATF fees and shipping. Asking $400.00 email me at jlaskowsky73@gmail.com or (813)545-3257 for pictures