Search the Community

Showing results for tags '.22'.

Found 9 results

  1. CMMG .22LR AR15 Conversion Kit I have several CMMG .22LR conversion kits for AR15 rifles available for sale. The kits were sales samples and as such are out of the wrapper, some may have had been test fired. Each kit will include a single 25 round CMMG .22LR magazine. These are highly reliable units that make for an easy and cheap alternative when shooting any standard .223/5.56 AR15. Simple remove the factory bolt carrier group, replace it with the CMMG conversion bolt, reassemble, and you are ready to shoot using the provided .22LR magazine. -Price: $150.00 each - Shipping: Actual Price - Contact: PM or email at bevisblack15NOSPAM@yahoo.com (remove NOSPAM) - Payment: Standard PayPal plus the fee or USPS money order
  2. Bring your favorite rimfire to life with this adapter ! This mount fits the rimfire rifles with grooved receivers and allows the use of modern scopes and rings. Both Weaver and Picatinny type scope rings will fit this mount which uses the military standard Picatinny rail. For more information and to order please visit www.stormwerkz.com Thanks for the boards Buddy !! Rimfire dovetail mount adapter
  3. StormWerkz scope mount for the Savage Rascal . The Savage Rascal is an excellent rifle to train the younger set. With the StormWerkz mount and a red dot in place, the loading port is visible to the trainer and trainee making for a very safe environment. Using a red dot is much simpler to use than iron sights or rifle scope as it is easy to line up on the target and no parallax to deal with. The mount isCNC machined from aerospace aluminum bar-stock and comes with mounting screws. $30 Visit our website www.stormwerkz.com for this and other StormWerkz products Thanks for the board Buddy !! Savage Rascal Mount
  4. StormWerkz scope mount for the Ruger Rimfire pistols. This StormWerkz scope mount fits all factory drilled and tapped Ruger MK I, MK II, MK III, MK IV, Government Model, Competition, and 22/45 rimfire pistols. No need to remove the rear sight. Sights are visible with mount installed. Both weaver and picatinny rings and adapters fit this mount. The mount is CNC machined from 6061-T651 aluminum bar stock, anodized matte black or clear aluminum color and comes with mounting screws. StormWerkz – Ruger MKIII Scope Mount (SM-MKIII-01) $30 Please visit our website at www.stormwerkz.com Ruger Scope Mount Thanks for the boards Buddy !
  5. Norrell 10/22 trigger pack gun This is an outstanding condition Ruger 10/22 with the highly desirable John Norell trigger pack installed. The pack features the lever type selector and is in close to new condition. This package also includes a Norrell .22 suppressor already mounted to the gun which is housed in a Nordic stock. One magazine is included. This is a great opportunity to pick up a full 2 stamp package that is ready for the range. Price: $16,500 SPF **Additional Images are available upon request** Local buyers are welcome to come and inspect firearm in person with an appointment. Upfront payment in full begins the paperwork. Please contact me either via PM or by email at: bevisblack15NOSPAM@yahoo.com (just remove “NOSPAM). Im happy to speak by phone to serious buyers. Shipping at actual cost.
  6. WTS: Gemtech Outback 2

    For sale is my Gemtech OutbackII. I am the original owner and have shot it about 500rds. It comes in the original box with the original owners manual. Its on a form 4 in Florida. Buyer pays all ATF fees and shipping. Asking $200.00 email me at jlaskowsky73@gmail.com or (813)545-3257 for pictures
  7. For sale is my Liberty Suppressor Kodiak TL .22cal suppressor. I am the second owner and never shot it. It comes with the original velcro case. Its on a form 4 in Florida. Buyer pays all ATF fees and shipping. Asking $200.00 email me at jlaskowsky73@gmail.com or (813)545-3257 for pictures
  8. This is sold pending funds. I've decided that it's time to get rid of my "fringe" toys that I rarely use, so it's time for the Razorback to go. What I'm selling is a Lakeside Machine X-1 Razorback 22LR beltfed upper with a whole pile of accessories. This upper was purchased from Eric Graetz (Lakeside Guns) at Knobb Creek the last year he attended as a vendor. I futzed with this upper for a long time and only had intermittant success getting it to run more than a couple rounds at a time. Eventually, I boxed the entire thing up (along with my M16) and shipped it to Eric asking him to just "make it run". You can see some shiny spots in the feed area where he polished parts of it. Unfortunately, shortly after it came back Sandy Hook happened and 22 ammo all but disappeared. These uppers are selective about the ammo they use in the first place, and it was tough getting ANY ammo. Since that time, the upper has stayed on one of my benches collecting dust - it just wasn't worth it to try and hunt down lots of different types of ammo during the panic to see what would work. As a result, there are probably less than 300 rounds fired through it. The upper comes with the following accessories: 1 standard buffer 1 super heavy buffer 2 short carbine buffer spacers - the original that came with it, and a second, slightly shorter one that came back with the upper from it's visit with Eric 1 long rifle buffer spacer 6 200-round belts 1 50-round belt 1 belt loading kit - When I ship the upper out, I'll remove the kit from the 2x4. It's just a piece of scrap wood. 2 metal feedboxes, created by ARFCOM member Southern_Raider. Note that the feedboxes are meant attach to the left side only. They'll attach to the right side, but there's nothing to lock them in place, and there's no real way to feed an empty belt into it reliably. 1 brass catcher, also created by Southern_Raider 1 Armorer's Block 1 aluminium charging handle in the upper along with 2 extra plastic charging handles, so 3 total (I swapped out the AL and a plastic handle for the pic) 1 Armorer's Block Bolt Stop 1 4'oclock hammer spring I also attached an FAL-style carry handle to the upper, as seen in the pics. A second barrel shroud, retaining nut, and threaded barrel collar. The barrel collar has the same thread as an uppper receiver assembly so that you can attach a standard rail. I bought that from Lakeside when I (very) briefly went through a phase wanting a rail on the gun, as seen in the below pic: I was on the waiting list for an advanced spare parts kit, and back in March Lakeside contacted me with some available, so I bought a spare parts kit for $225. The spare parts kit looks like a combination of both Razorback as well as a few other parts I can't identify (1919 miniature maybe?). Using this diagram, these are the parts I identified for certain: 1 Firing Pin 1 Extractor 1 Flipper Cam 1 Feed Lever 2 Feed Pawl Springs 1 Wave Washer 1 U-Clip 1 Plastic Charging Handle 1 4 O’ Clock Hammer Spring 1 Standard (?) Hammer Spring 1 Disconnector Spring 1 Feed Lever Screw 1 E-Clip 1 Flipper Cam Retaining Spring 1 Firing Pin Spring There are other parts I can't identify, but since Eric sent them I'm sure they fit in there somewhere. You can see for yourself what came in the kit with the following pics: The 4 O’ Clock Hammer Spring sitting beside the parts kit box is the one that originally came with the upper. I'm selling this as a package deal and will not sell the parts separately. If you'd like specific pics please don't hesitate to contact me. If you live local to me in NW Atlanta (or have a friend that does) and want to see it, contact me and we'll work something out. $1700 shipped & insured with delivery confirmation - this is less than I paid for the Razorback alone, not counting all the accessories and parts. I'll accept either Postal money orders or PayPal + 3.5% (no gift option). Thanks for looking, -bob
  9. Make your 10-22 look like an HKGG36 with this carbon fiber reinforced conversion stock. As new not in original package. I decided to go with a bullpup on my 10-22 and ended up not needing this one. It comes with 4 25 round magazines 3 of which are in their orig package, a factory Ruger barrel with attached 4 prong HK style flash hider, a folding vertical foregrip, a rail mounted red laser and 2 extra side rails. MSRP of the stock by itself is $209.75 and the mags retail for $31.75 ea. Just that adds up to a bit over $300 and you get everything listed for $200 plus actual shipping. Email me for pics at: lsabrestorations@NOSPAMgmail.com (just remove nospam). You can see the manufacturers pics and description/ specs at: http://promagindustries.com/ruger/42-archangel-nomad-conversion-stock-for-the-ruger-1022.html