Search the Community

Showing results for tags 'thompson'.

Found 30 results

  1. This C&R, M1-A1 Thompson, serial number 635813, was made by Savage Arms in Utica, NY, under contract to Auto-Ordnance in Bridgeport, CT, and was likely manufactured during the Spring of 1943. The trigger frame serial number does not match the receiver serial number. The bolt is M1 parkerized and as such the "A1" part of the marking on the frame has been X out, the selector levers are pin-type, and the buttstock features the reinforcing cross-bolt. The buttstock is marked "MR" for Mount Rainier Ordnance Depot. The weapon has definitely been refinished. It features a very faint Ordnance wheel stamping, and is also acceptance stamped (twice) again very faint and very hard to see. Its military inspector stamp of "FJA" also very faint is from Colonel Frank J. Atwood, who was the Army Inspector of Ordnance for the Rochester, NY district beginning on June 15, 1942. Included in the sale is a reproduction Kerr sling, custom made discrete ballistic nylon case, 4 magazines and a copy of American Thunder II Second edition. Serious parties may view and test fire the gun in Wisconsin. Buyer pays all Taxes, fees and shipping. Jeff Whisler 262-623-7450 Jackson, WI
  2. Thompson M1A1 Bridgeport

    Thompson M1A1 BRIDGEPORT Collector grade gun in excellent condition. Comes with magazines shown in photos. Gun is on a Form 4 in Maryland $30,000.00 USD Contact Doug 240-793-7739 ***serious inquiries only***
  3. Thompson 1928 US Navy OS

    Thompson 1928 COLT US Navy Overstamp This is a collector grade gun in excellent condition. Comes with one 50-round drum. $50,000.00 USD Gun is on a Form 4 in Maryland. Buyer pays actual shipping cost. Contact Doug 240-793-7739 ***Serious inquiries only***
  4. I'm selling an early AOC M1 Thompson machine gun for $20000. It is on a Form 4 in Texas. I have my FFL/SOT, but this is a personal gun. This gun is a rewat that had its barrel replaced. It was refinished after that and looks great but there is some light pitting in the receiver. I believe the pictures show the condition of the gun. Shoots great also, but I don't enjoy shooting it as much as some more modern subguns, so off it goes! Please contact me with any questions. Thanks! Mit Matelske
  5. This is an Auto Ordnance M1A1 that has the original box, manual, warranty card, and catalog! It shoots extremely well and is in perfect condition. This Thompson gun is papered C&R and was made in 1986. There were only 600 M1 made in West Hurley NY. Comes with 3 magazines and original sling from WW2. Barrel length 10.5" overall 32" . Buyer is responsible for all shipping and insurance costs. I will pay the first stamp. $22,000 Pictures here:
  6. Two very nice Thompson British Lend Lease parts kits with barrels. The top one is a Thompson 1928A1/Sold the bottom one is a Thompson M1 (Still for Sale), barrel in very good condition. When the British got these guns they changed a few things they stippled the forearms and put the sling loops on the side of the forearm. They also moved the sling loop in the back to the top of the rear butt stock and filled in the bottom with a piece of wood. Some neat history on the Lend Lease guns hard to find in this condition. Can take more photos if someone needs them. $1900 each kit or $3400 for both. Everything that is pictured on small parts included. Shipping and insurance not included. Check or Money Order Only. I can provide references if needed. I can provide more pics if someone needs them
  7. SOLD ............No Longer Available This STG M1928 was purchased new from BRP and is still in "like new" condition. The wood is from original Thompson M1928 thus had minor dings and scratches when this gun was purchased. Gun runs flawlessly. Has never had a "hickup". Actually runs better than an original Thompson 1928. Comes with a 30rd Thompson magazine and STG takedown tool (not shown). Thompson accessories like the "gangster" vertical grip will fit this gun. The overall appearance of the STG M1928 with finned barrel, Cutts compensator and detachable stock is like that of an original M1928. The exceptions being that the rectangular adapter housing for the Stemple 76/45 receiver tube is 3/16 in. taller and 3/4 in. longer than the original and the charging handle is on the side (like the Thompson M1A1) instead of the top. On form 4 in SC. $200 tax to SOT or SC resident is included in price. Price: $10,000.00 Shipped ($200 tax stamp included) Shipping to lower 48 states by USPS Registered Mail (insurance extra) Please email questions to, PM, or call Thanks for looking, James History of Stemple 76/45 Takedown Guns (STG) Transferable Machine Guns In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. Built for performance and durability BRP Corp stocks plenty of high-quality spare parts, and provide excellent service. The Stemple STG M1928 is assembled from an original Stemple 76/45 machine gun receiver, newly made Stemple-compatible parts, and several original Thompson components. The Stemple 76/45 machine gun receiver inserts into a long receiver shroud. This holds the receiver in position with lower assembly and aligns the sear opening in the Stemple receiver with the new sear in the original Thompson fire control group. The bolt guide, bolt, barrel, mainspring, buffer, and guide rod assembly is a removable unit inserted through the front of the Stemple receiver. These main wear parts are easily repaired or replaced if necessary.
  8. WTS: 1928 Thompson SBR

    For sale is a Auto Ordinance / Kahr Arms 1928 Thompson SBR, New In Box. This is a semi auto short barrel rifle. NOT a machine gun!! Will accept 20 round & 30 round magazines & drums. Barrel length is 10 1/2 inches. Comes with one 30 round magazine. Looks just like a 1928 Thompson. (Gun is marked Model of 1927 A1) This is your chance to own a Thompson for a fraction of the cost of a full auto. This is a customers gun who decided that he did not want it and wants to move to something else. It is on my books and will transfer out on a Form 3 to your dealer. If you are in Arizona I can transfer it direct to you on a Form 4. All NFA Laws apply. Check you local laws. $2150 + shipping. White Mountain Exotic Machines, Inc., Lakeside, AZ
  9. Pre May Sample Bridgeport M1A1 on a form 3 in FL It came out of a local police department on a trade, Import marked on the bottom of the trigger guard Law Enf Ord, Athens GA This SMG comes with an original GI issue 5 magazine canvas pouch, 5 - 20 round magazines (2 Seymour, 2 Auto Ordnance, 1 misc). Overall Condition: It is in 85% condition, with the original finish showing signs of wear in spots on the top receiver, but no pitting. Fires in full auto and semi auto modes flawlessly and has been enjoyed for 3 years here. Shipping and insurance will be $100. Credit card add 2% $11000 352-Three-Eight-Five-2767 Mark
  10. ***SPF*****What you see is what you get. This is a receiver nose stub section that came off one of the Sportsman's Guide TSMG kits about 10 years ago. $50 shipped USPS MO ONLY. Will ship in a small box or padded envelope USPS snail mail.
  11. Let me know what you have and what you are asking. Email me: with pix to guns at eleyarms dot com.
  12. For your consideration, I have one NOS in grease wrap M1A1 Thompson SMG bolt. Savage mfg, still sealed in cosmoline. Perfect to keep your SMG running or to tuck away for a rainy day. $215 shipped to US First unconditional "I'll take it" posted in this thread gets it Prompt Paypal gft or + fees for payment No trades CROSSPOSTED Thank you for looking!!
  13. For your consideration, a very nice USGI M1A1 Thompson SMG rear receiver demil. Good amount of meat on it, nice rear sight. No rust or damage aside from the obvious. $50 OBO shipped to US First unconditional "I'll take it" posted in this thread gets it Prompt Paypal gift or + fees for payment No trades CROSSPOSTED Thank you for looking!!
  14. For your consideration, a nice original USGI Kerr Nobuckl rifle sling. Nice patina on metal, a couple spots of cleaned up rust on one clasp, minor edge wear on sling, no tears or major issues. Awesome original piece with some nice character. $40 shipped to US Prompt PayPal for payment CROSSPOSTED Thank you for looking!!
  15. I'm in the market to buy a USGI Thompson M1 or M1A1 or a M3 or M3A1 Grease Gun. Not looking for any rare museum quality pieces. This will be a shooter. I'd like to do a 50/50 payment and have plenty of references from dealers and other board members, as well as 100% positive feedback on other forums. Obviously I prefer a gun in state (FL) or on a form 3. Not interested in West Hurleys or Medea guns. Please e-mail me at matthewtroccoliesq (at) gmail (dot) com
  16. Available for your consideration, New Old Stock USGI M1A1 Thompson SMG bolts. These are new in grease wrap, Savage mfg. perfect for keeping your Thompson SMG running or to tuck away for a rainy day. $200ea **ALL SOLD PENDING FUNDS** $7 flat shipping Payment by prompt and discreet PayPal +fees or f/f gift, MO, check or cash Only a few available, first come first served IM or email with questions/offers Thank you for looking!
  17. TSMG Auto Ord receiver nose piece. $100 shipped. This came off one of the 45 kits sold several years ago. These were from TSMG's left in Stuart Light Tanks that the USA gave to Russia at the conclusion of WW2. Since the Russians didn't use 45ACP they stored these in a cave until the 2000's and sold them. USPS MO or paypal is OK. If you do paypal I'll send you an invoice. If you go ahead and pay me with paypal and gun words I'll ban your ass and never do business with you again.
  18. I have a nice Thompson kit, it is the M1 version ( bolt). The barrel and front end are in good condition as are all the other parts. There are no rear receiver sections in this kit. Wood is good with no cracks. These kits have become scare and I have a spare so I am selling this one. $725 delivered. Also for sale is an Aluminum receiver for a dummy gun. Excellent condition. $118.00 Del. 2 1928 receivers sections in 3 pieces. front end and barrel are not included. Pics show condition and potential. $168 for both, Del. USPS MO prefered. Will accept checks but will delay shipping until it clears. Also can process Visa MC AMX or DISC but adds 4% to total. Paypal 4%, Venmo is another payment option and it is free.
  19. WTK: Value of Saw Cut 1928 Thompson kit

    I'm selling a saw cut Auto Ordnance 1928 Thompson kit with US made barrel. Two USGI stick mags and 3 aftermarket drums. Receiver is cut per BATF spec. All parts on the kit look brand new. Cuts do not go through the branding on the top of receiver and ejection port is not cut through. All markings are intact. What is a value range for the kit? Sorry for no pics, I currently have it on consignment and am getting an offer of around $1700. As this is prime for a post sample build and getting harder to find I was thinking it worth closer to $2250. Any thoughts are appreciated. If someone is truly interested I'll pull the kit and send pics. Thanks.
  20. For sale is my Auto Ordnance M-1 .45acp SBR semi auto Thompson. I am the original owner and have shot 100rds through it. It comes with 13 30rd stick mags and 2 20rd stick mags along with an original WW2 oil bottle and wood stock and a reproduction Kerr sling. Its on a form 1 in Florida. Buyer pays all ATF fees and shipping. Asking $1200.00 email me at or (813)545-3257 for pictures
  21. I have the following parts I'd like to sell as a lot. Lot includes Sear & Sear Spring, Extractor, Ejector, Frame Latch, Hammer Pin, Magazine Catch Spring,Misc Spring. All parts in good condition. $40.00 Shipped
  22. This gun was amnesty registered by a local PD, and kept in inventory until a few years back. It has all Colt 1921 internals, and is in beautiful condition except for an engraved inventory number on the left side and bottom of the receiver. I tried to take pictures highlighting any defects. The wear spots are not as glaring as in the pictures, but I wanted to provide a clear representation of the firearm. Included with the sale are the original case, a 50rd New York drum, and 4 "patent date" mags. $35K Price includes shipping, Gun is in stock and will transfer out on a F3. You can contact me at "spgtech at comcast dot net", or call at 206-three hundred-2180. Thanks for looking! -Sean SPG Technologies
  23. Large Suppressor Sale all on Form 3's

    We are having a large suppressor sale until the items are gone from inventory. Shipping is $15 per suppressor. If you buy multiples we will combine shipping. Make Model Sale Price surefire ryder 22-s $355 surefire ryder 22-a $199 aac 300tm $920 aac sr7 $941 aac sr5 $941 silencerco saker 556 $832 thompson isis2 45acp $513 knights usp45 $1,143 aac prodigy $381 keystone situator Pink $165 silencerco salvo $970 All Shipping to Alaska, Hawaii, Guam and other outside the Continental US will the actual cost of Shipping.__________________________________MachineGunTours12550 W. Colfax Ave. Unit 103Lakewood, CO 80215303-993-8361 O 303-374-8042 F10-6 M-SAT 10-3 SUN
  24. This is a really clean West Hurley Thompson M1. The finish is very good with just a few small scratches. The wood is very nice as well. This came from a gentleman that said he was the first owner, I believe he was probably the second? Regardless, he had owned it since 1986. The action is smooth as butter. This gunwill not accept drums,howeverIt will come with10- 30 round magazines. I will include shipping to your FFL in the 48 states. This item ison a form 3 in Kentucky. $17,500shipped.Please call or email me at or 859-361-9444 if you have any questions. Thanks for looking Rex Tyson Kentucky Firearms