Search the Community

Showing results for tags 'mp5'.

Found 83 results

  1. The B&T USA / Brugger and Thomet KH9 was made in Switzerland and designed by Karl Brugger as Karl's Hobby 9mm which is a modernized Italian Sites Spectre M4 double/single action submachinegun with several design improvements. The KH9 has the option of feeding from either standard B&T magazines interchangeable with all of their firearms or includes a Finnish Soumi KP31/M31 magazine adapter to use coffin magazines. The recoil-springs operate on twin guides as opposed to the Spectre which is free floated and prone to binding. Receiver is a monolithic SCAR-type with quadrail and taken from the B&T GHM9. Barrel has an HK three-lug adapter. Controls are completely ambidextrous with magazine release and decocker on both sides. Charging handle was inspired by the Ingram M10 or IMI/IWI UZI, Pistol grip was based on the SIG SG550/STGW90, and the rear trunnion uses standard B&T MP9/TP9 stock/brace assemblies. Package includes hardcase, Soumi coffin magazine adapter, front/rear flip-up sights, two 30 round magazines, cleaning kit, manual, and hard-case. Photo is representative of another of my B&T KH9 examples. The firearm you will be receiving has not been fondled or touched. Made in Switzerland, this is 1 of 400 imported. Once gone, these will not be seen again. $2000 shipped.
  2. Transferable Fleming Sear registered in 9, 223, and 308 installed in burst pack. Installation of sear was performed by Ralph at RDTS. This sear is currently on a Form 4 in Texas. Buyer is responsible for all transfer fee's. Shipping is $15 unless buyer requests insurance at their expense. $30,000. www.mlfirearms.com
  3. 30 Round Magazine - HK MP5 40/10 - $99.95Heckler & Koch30 Round Magazine - HK MP5 40/10 - USA - $49.95HK PARTSMagazine Follower For HK MP5 40/10 Mag - US - $9.95Magazine Body for 30 Round MP5 40/10- US - $29.95HKParts.netMagazine Spring For HK MP5 40, 10 - 30 Round - US - $4.95Magazine Release Lever Spring - MP5 40/10 - $9.95Heckler & KochMP5 40/10 Magazine Block - 10 Round - $9.95In stock and ready to ship today.HKPARTShttps://www.hkparts.net/(801) 987-3494
  4. Firing Pin - MP5, 94 & MP5K, SP89 - USA - $17.47HKParts.netMP5, 94 Wide Forearm - $23.95HKParts.netMP5 40, MP5 10mm Trunion - $139.95RCMHK34 Cocking Tube - USA - $139.95HKParts.netMP5K 40, MP5K 10mm - Bolt Group Complete - $499.95HKParts.netFull Auto Bolt Carrier - MP5K 40, 10mm - $149.95HK PARTSIn stock and ready to ship today.HKPARTShttps://www.hkparts.net/(801) 987-3494
  5. Universal Bore Cleaning Brush - 9mm,10mm40 S&W - $7.95USAHK MP5K 40/10 SEF Navy Style Push Pin Housing - $149.95Heckler & KochAR Buffer Tube Pistol Stabilizing Brace Complete- Dark Earth - $178.95SB TacticalMP5K, MP5 - B&T Folding Stock Section Only - $149.95B&T Brugger & ThometAntiVenom - XPLC - Aerosol Lubricant & Cleaner - $18.95Strike Industries3 Point Factory Sling HK German - Black - $69.95Heckler & KochIn stock and ready to ship today.HKPARTShttps://www.hkparts.net/(801) 987-3494
  6. WTS S&H Roller sear $34,495

    This is a S&H roller sear. Very rare low friction sear modeled after the newest factory HK sears with the roller tip. It will reside in a four position burst trigger group set up for an MP5 ready to shoot. Absolutely runs flawlessly now. This item is on a form 4 in Kentucky. The shipping and transfer to your FFL is included in the price. $34,495. If you have any questions please contact me at rext269@aol.com or 859-361-9444. Thank you for looking, Rex Tyson Kentucky Firearms
  7. -----------------Price: Price: $199.95-----------------Follow the link for more details and to order online. You can also order through the phone at (801) 987-3494https://www.hkparts.net/shop/pc/view...adminPreview=1-------------------------------------Click here for our complete inventory and kits available here at HK parts. https://www.hkparts.net/shop/pc/home...re
  8. MP5 & MP5K, SP5K 30 Round Magazine - German-----------------Price: Price: $74.95-----------------Follow the link for more details and to order online. You can also order through the phone at (801) 987-3494https://www.hkparts.net/shop/pc/MP5-...erman-5p86.htm-------------------------------------Click here for our complete inventory and kits available here at HK parts. https://www.hkparts.net/shop/pc/home...re
  9. Some wonderful parts for your MP5 40. All in stock and ready to ship! MP5K .40 3 Lug & Threaded Barrel - USAhttps://www.hkparts.net/shop/pc/MP5K...A-286p2318.htmPrice: $299.95HK Front Sight Blade - USAhttps://www.hkparts.net/shop/pc/HK-F...-346p17551.htmPrice: $3.95HK MP5, MP5K Cocking Handle - Extended Enhancedhttps://www.hkparts.net/shop/pc/HK-M...-287p18267.htmPrice: $39.95German MLI HK MP5, 94 & HK53 HKey Handguard - MRShttps://www.hkparts.net/shop/pc/Germ...S-92p17600.htmPrice: $499.95
  10. Our 100% U.S.A made, CNC machined, aircraft grade aluminum lower is a perfect way to stay 922R compliant while creating a unique, custom look to your roller lock firearm! The HK-AR lower grip frame allows your SEF style HK trigger pack to drop right in. Our new modular design allows the user to add any AR grip, AR trigger guard to make our own unique custom feel and setup. With literally hundreds of AR15 grips on the market this lower enables you to choose from a huge selection of AR grips to build a look and lower that is truly your own. As an added bonus this lower option will add 1 USA made part. Simply add a USA made pistol grip such as a Magpul, BCM, etc and you have will have a total of 2 USA compliant parts. Our lower system also features a built in QD attachment point on the rear of the lower for the ultimate in enhancement and usability.SPECIFICATIONS / SPECIAL FEATURES: Accepts all SEF style semi trigger packs Long axled SEF selector levers will fit and work properly Built in QD sling attachment point on the rear of the housing for slings Weight 7 ounces & cerakoted HK black Works will all HK registered SEF F/A trigger packs (NFA rules apply) Accepts any AR15 style pistol grip and trigger guard Lifetime Warranty! Finest, HK-AR grip on the market USA made and counts as 1 922R part with the option of adding a second 922 part with the addition of any USA made AR pistol grip Simply the finest HK-AR grip at the best price in the country! Fits all semi auto shelved in spec firearms such as: G3, 91, PTR, C308/CETME (with HK trigger pack & selector lever ) HK93,33,53, C93, C53 HKMP5, HK94, Omega, DTAC, TPM Clones or other custom builds Will not fit or work with push pin style lowers such as Zenith, POF or other swing down push pin firearms. -----------------Price: $149.95-----------------Follow the link for more details and to order online. You can also order through the phone at (801) 987-3494HK-AR SEF Lower-------------------------------------Click here for our complete inventory and kits available here at HK parts. https://www.hkparts.net/shop/pc/home...re
  11. Just in from Heckler & Koch, the new SP5K 9mm pistol. Brand new in the box with two 30 round H&K mags. Note, that the box is marked 10rd, but they are factory 30 round magazines. I do have more than one of these available. Part no. M750900-A5. Price is $2,395 Flat rate 2nd Day Air Shipping of $25 anywhere in the 48 states. Payment via certified funds or credit card with an extra 3% fee.
  12. HK MP5, 94, MP5K, SP89 & HK53 Front Sight Tower - US Made - BilletedNew US made from a solid billet of ordnance grade steel. Each front sight tower, triple frame set comes complete with a new HK diopter style replaceable front sight post & roll pin. This is the complete set made to the highest tolerances. No ugly castings or low quality inferior contact parts only the finest American billeted all steel front sight tower assembly. Simply the finest front sight tower at the best price anywhere!Each sight assembly includes: Billeted steel front sight tower Steel front sight blade Roll pin for sight blade Factory correct HK style front sight tower, triple frame for the following:HK MP5, 94HK MP5K, SP89, MP5K-NCustom HK builds & clonesHK53 factory correct height for builds-----------------Price: $34.87-----------------Follow the link for more details and to order online. You can also order through the phone at (801) 987-3494https://www.hkparts.net/shop/pc/Fron...US-5p17792.htm-------------------------------------Click here for our complete inventory and kits available here at HK parts. https://www.hkparts.net/shop/pc/home...re
  13. MP5 & MP5K, SP5K 30 Round Magazine - Germanhttps://www.hkparts.net/shop/pc/MP5-...rman-74p86.htmPrice: $74.95MP5, MP5K 30 Round Magazine - USAhttps://www.hkparts.net/shop/pc/MP5-...A-74p17250.htmPrice: $49.95MP5, MP5K - 38 Round Magazine - USAhttps://www.hkparts.net/shop/pc/MP5-...A-74p17394.htmPrice: $54.95MP5 & MP5K, SP5K 10 Round Magazine - German https://www.hkparts.net/shop/pc/MP5-...n-74p17872.htmPrice: $74.95
  14. All in stock and ready to ship! G3, 91 & PTR - US Made Trigger Pack - 4 U.S. 922 PartsPrice: $219.95https://www.hkparts.net/shop/pc/G3-9...-107p17949.htmZenith 9mm US Made Trigger Pack - 4 U.S. 922 PartsPrice: $249.95https://www.hkparts.net/shop/pc/Zeni...s-88p17878.htmHK German SEMI .308 Trigger Pack CompletePrice: $114.95https://www.hkparts.net/shop/pc/HK-G...te-107p217.htmAmbidextrous 9mm US Made Trigger Pack - 4 U.S. 922 PartsPrice: $299.95https://www.hkparts.net/shop/pc/Ambi...s-88p18269.htm
  15. Some of our MP5 and MP5K offerings. Click the link for more details.- MP5K-N 9mm PDW Threaded Barrel - 1/2 X 32 -https://www.hkparts.net/…/MP5K-N-9mm...ded-Barrel-1-…Price: $169.95- MP5 AR, M4 Adapter & Stock Complete -https://www.hkparts.net/…/MP5-AR-M4-...ock-Complete-…Price: $229.95- MP5 Navy Barrel - 3 Lug & Threaded 1/2 X 28 - USA -https://www.hkparts.net/…/MP5-Navy-B...g-Threaded-1-…Price: $129.95- MP5K, MP5 - B&T Folding Stock Section Only -https://www.hkparts.net/…/MP5K-MP5-B...-Stock-Sectio…Price: $149.95
  16. A CLEAN HK MP5 IN .40 S&W. THIS IS A POST 86 AND WILL REQUIRE A SOT AND LAW LETTER IN ORDER TO PURCHASE. PRICE IS $3,600 IF YOU HAVE ANY QUESTIONS, CONTACT ME AT WABRAMS@SGC-SCOTTSDALE.COM
  17. WTS: HK MP5 .40 S&W FIXED STOCK $3,500

    A CLEAN HK MP5 IN .40 S&W. THIS IS A POST 86 AND WILL REQUIRE A SOT AND LAW LETTER IN ORDER TO PURCHASE. PRICE IS $3,500 IF YOU HAVE ANY QUESTIONS, CONTACT ME AT WABRAMS@SGC-SCOTTSDALE.COM
  18. These are hard to find and the real deal. 100% Swiss & German HK Made. Fits all HK MP5, 94 and other full size or clones (NFA rules apply). This is a military grade stock. B&T Switzerland has supplied these to law enforcement and military units around the world. B&T is an HK-OEM manufacturer. Technical Information: Each stock uses the factory HK German UMP stock for a longer length of pull over the stock B&T folder. A rare combination and hard to find.* Weapon: HK MP5, HK94 & B&T BT96* Material: Polymer, Steel* Color: Black * Weight: 12.2 oz. * Mounting: Standard HK small push pin * No modifications on weapon housing required on IN SPEC firearms * B&T Description: B&T stock foldable polymer with adapter for HK MP5* Total length from middle of pin hole to end is 11"-----------------Price: $279.95-----------------Follow the link for more details and to order online. You can also order through the phone at (801) 987-3494https://www.hkparts.net/shop/pc/view...8&idcategory=0-------------------------------------Click here for our complete inventory and kits available here at HK parts. https://www.hkparts.net/shop/pc/home...re
  19. This is mint MP5 pushpin 9mm papered from Fleming Firearms, Collinsville OK converted from an HK94 It is restamped MP5, has the paddle mag release, and ambidextrous 3 round burst group installed but you can put any pushpin lower on it. Barrel 8.9" overall 26.8"and comes with one mag. Very nice gun that works flawlessly. More pictures available upon request. Shipping and insurance at buyer's expense. $36,000 Pictures here: https://imgur.com/a/xflCO
  20. HK 2nd Generation German MP5 & HK94 Factory A3 Retractable Stock The non F style German HK MP5 A3 stock is no longer in production and are quite hard to find as they have been replaced with the MP5 F style stock. Each offering is the second generation version with the polymer backplate and lever. Fits all: MP5, 94 MP5 clones & custom builds Please note: That with all HK German stocks the black finish may vary in the sheen and gloss used at the factory. This is totally normal and common on all new production stocks. No returns on cosmetic paint or handling marks as they come from the factory in most cases with these markings.-----------------Price: $497.95-----------------Follow the link for more details and to order online. You can also order through the phone at (801) 987-3494https://www.hkparts.net/shop/pc/Germ...tock-5p167.htm-------------------------------------Click here for our complete inventory and kits available here at HK parts. https://www.hkparts.net/shop/pc/home...re
  21. HK German MP5 9mm Used Parts Kit Complete(Minus Receiver Of Course).All MP5 Kits: 100% German Parts HK 3-Lug MP5 Barrel - cold hammer forged Cocking Tube Front Sight Tower Wide Fore arm - Black Bolt Group - MP5 Full Auto Push Pins - 1 Large and 2 Small 30 Round Curved Magazine - Genuine HK Rear Sight Assembly Armorer's Manual Receiver not included This Parts Kit: Includes: 4 Position Ambidextrous Trigger Group One of the following: 0, 1, 2, Full - Pictogram 0, 1, 3, Full - Pictogram A3 Retractable Stock Receiver not included. De-milled receiver per BATFE specifications. -----------------Price: $2,799.95-----------------Follow the link for more details and to order online. You can also order through the phone at (801) 987-3494https://www.hkparts.net/shop/pc/MP5-...er-86p1301.htm-------------------------------------Click here for our complete inventory and kits available here at HK parts. https://www.hkparts.net/shop/pc/home...re
  22. Pre May HK MP5 w/Silencer

    Pre May 86 Dealer Sample HK MP5 with Fisher Silencer. Comes with 6 Magazines. $15,900
  23. For sale is an original HK MP5 briefcase made in West Germany in the late 80's. It is a hard sided briefcase and has 2 locks. It is in brand new, never been used condition and comes with 2 keys in the original plastic bag. It is new old stock from HK storage in Germany. Asking $400 plus $40 shipping or will trade for nice optics. Payment via Paypal friends and family.
  24. Gun comes from Sheriff's Dept that switched to all SIG SAUER, shortly after taking delivery. This pre sample machine gun looks new and unfired with updated collapsible "F' stock, ambi/ picto lower and B&T tactical forearm. All parts on this gun are either Factory HK or Factory B&T. This would make an incredible keeper for when you give up your FFL, and is more updated that most any Dept. is currently fielding. $13900.00. Lots of really nice pre-samples for sale. Needing to part with a few duplicates! Please email me if you have questions or need additional pictures. Thanks! Tom