mbell556

Lieutenant
  • Content count

    55
  • Joined

  • Last visited

  • Country

    United States

Community Reputation

4 Neutral

About mbell556

  • Rank
    Active Duty

Personal Information

  • City and State Morehead City NC
  1. This is an excellent condition MM23E . This rifle has been fired exactly 290 rounds and you can see it fire every one of those rounds. I loaded 3 belts of 30 rounds and 4 belts of 50 rounds and a friend of mine took his video camera out when we test fired this gun. It functioned perfectly as you can see in this video. https://www.youtube.com/watch?v=DwZnz-Ki5_g I took the rifle home cleaned it and put in on the vault wall where it has been since.I have a registered receiver German HK23E and lots of other hosts for my registered HK sear so this rifle has remained unfired since it's test firing.I am retired and just thinning out some of my redundant items. It comes with an extra heavy barrel and light barrel plus the light barrel it came with. The extra light barrel is unfired.The original light barrel and the heavy barrel were used in the test firing. I added a German 23E belt guide seen in the pictures. Please look at the pictures closely for condition. This MM23E is not so much used as it is vetted so you can know there are no manufacturing or functioning issues with this semi-auto belt fed host. It comes with the original SEF housing and a four position housing if you have a registered sear in a four position pack. This is a semi-auto only rifle and transferes as such to your local FFL dealer. Other extras include an adapter and 200 round SAW ammo box and 500 M27 clean used links. The price is $12,000 for the MM23E, 2 extra barrels, HK23E belt guide, SAW adapter, 200 round SAW box, 500 M27 links and the 4 position housing if you have a 4 position trigger pack. Shipping and insurance is $100. The barrels are around $1,000 each now and the adapter is around $200.You are ready to rock and roll with this package with no waiting. This package would cost around $15,000 new. Payment by check is fine if you want to wait until it clears. Certified funds ship right away as long as I have your receiving FFL .
  2. To clarify, the full-auto springs and weights are in the carrier but the guide rods are in the stock. The rods in the stock are a different length for full-auto. Mis-match the springs, weights and guide rods and you have a safety issue. Buy a full-auto stock and bolt carrier group and you know you are safe. My Idea was to set this sear up to be as safe, reliable and close to factory specs as possible. Look at the difference in the original Flemming hammer machining and the Dyer hammer in my trigger pack(the last picture in the post). It is about precision and quality which equates to reliability and safety when it comes to firearms. I don't want to drag Bill Flemming through the mud, God knows the NFA branch has done that enough, but the original conversions out there are pretty crude.
  3. VDY. Looks like November 1997.
  4. Thanks for the clarification. I edited the wording to make it clearer. I think of the stock and BCG group together, that's my mistake. I bought the full-auto AUG as a kit for this conversion. I changed the barrel to the 16" because That was more fun to shoot to me. Thanks for helping me straighten the wording out. I am an M16 guy for the most part.
  5. Not associated with the serial number. Would there be a mark somewhere else on the receiver?
  6. This is a Capital Armory repair/replacement A2 receiver. I felt it was worth it to destroy the original A1 preban receiver used in the conversion so I could upgrade the rifle to the A2 configuration. I spent about $1,300 total doing this. My goal was to make this the ultimate select fire transferable AUG.
  7. They are both semi-auto trigger housings. Neither of those can be placed into a full-auto stock. They sold very fast which usually indicates they were undervalued for the current market. I saw both of those. There are not a lot for sell. IMHO my set up is better than a registered receiver AUG which is an A1 and cannot be replaced. This set up can be used with any full-auto stock and with any semi-auto receiver. We'll see. Offers will be considered. The NFA market can be hard to judge for those items that are not relatively common. I by no means want to gouge on the price but I do not want to short change myself either. I put a lot of time, money and effort in setting up this AUG with the best parts and best gunsmithing available. If you are interested make an offer. This AUG set up has a pretty much indefinite life span.
  8. http://www.machinegunpriceguide.com/html/german_mg_4.html
  9. I bought this full AUG as an original Bill Fleming conversion, which is his steel Fleming Firearms registered sear in a converted semi-auto STEYR AUG. There is always a question of the proper full-auto rods, springs and anti-bounce weights being installed in the converted semi-auto host. The semi-auto trigger housing the sear was originally installed in could not be placed in a full-auto stock. With this conversion you can get a new full-auto complete kit, put the machined cross pin in the new stock, use any A1 or A2 receiver and you are good to go . Another issue I had, the machining and timing work Fleming did on the trigger was crude. I sent the rifle to Terry Dyer and he did his conversion by placing the sear in a full-auto housing and timing a new hammer to the sear. He made an extra hammer included in this deal. I have included pictures of the Fleming hammer and the Dyer hammer so you can see the difference. This package includes:1) an all full-auto factory stock with modified take down cross pin, 2)a registered sear in a full-auto trigger housing that can be placed into any full auto stock (the modified take down pin would need to be installed into the new full-auto stock so the stock could be used with a semi-auto receiver), 3) A machined take down pin in the stock that allows the use of any A1 or A2 semi-auto receiver, 4) An A2 receiver with removable optics 5) A 16" factory STEYR barrel 6) The upgraded roller style factory full-auto bolt carrier group with a full-auto cocking piece and proper rods, springs and weights, 7) an upgraded 3 position selector pin 7) a spare hammer machined and timed by Terry Dyer 8) a spare full-auto cocking piece and 9) 3 factory magazines(2-30 rd and 1-42 rd) All gunsmithing work was done by Terry Dyer and all spare parts were purchased from Pete Athens. This trigger pack can be used with any factory full-auto stock and semi-auto A1 or A2 receiver by changing out the take down pin to the machined take down pin installed in the current stock. This registered sear is on a Form 4 in NC. Price of $34K includes the first tax to your dealer if you are out-of-state and also the shipping (CONUS) and insurance. This weapon will be shipped registered mail/fully insured. Inside NC transfers can be done directly and delivered directly. Please review the pictures and feel free to ask any questions. Thanks for looking! Mike, mbell556 on YouTube.
  10. WTB Transferable Steyr AUG machine gun

    email me and we can talk. I was just getting ready to list one from my collection this coming week.
  11. WTB Transferable Steyr AUG machine gun

    Still looking?
  12. Let me know how you want to complete the paperwork. Thanks.