Age Verification

Thank you for your interest in Sturmgewehr.com  
Our site is for individuals at least 18 years old.

Jump to content

Spreadfire Arms

Airman
 View Profile  See their activity

  • Posts

    48

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Spreadfire Arms

  1. Spreadfire Arms
    I think I need to pay my membership dues before i can list....can someone point me in the right direction?
  2. Spreadfire Arms
    Any recent input on the value of these factory post samples? Both have factory box (I do not believe 18C has the manual), both to be about 1k rounds fired each. As the law letter and import process is getting more scrutinized I am wondering if this has affected the market in either direction. Thanks in advance.
  3. Spreadfire Arms
    I have a Post-86 Dealer Sample RPD made by DSA Inc. on a Polish Parts Kit. As you know these parts kits are now gone so getting a C2 to just make one is more difficult. I have attached photos of the actual machine gun. It was purchased in 2017 from DSA. It is overall in excellent condition as you can see. On a Form 3 in Texas. Weapon is registered to my SOT and in my possession. Will not be fired any more so what you see will be the same condition. As this is a Post-86 Machine Gun please note you will have to obtain a valid Law Letter signed by a CLEO of a LE Agency. Make/model for the letter is: "DS Arms Inc. RPD" and the caliber is 7.62 x 39. Overall length is 36.5" and the barrel length is 16.5." This uses non disintegrating belts. It will come with the following pictured accessories: five metal drums, one SAW nutsack, one sling, and eight belts. One belt is covered in cosmoline so unfortunately the new owner will have to clean that up. There are four starter tabs included as well. I also have the DSA factory manual. The machine gun itself has modern furniture (Magpul stock, SAW style grip, grip pod, and picatinny railed forend) and has a removable SAW box holder. Asking price is $8000.00. Shipping will be at actual cost and the buyer can provide a shipping label or they can pay the actual rate upon approval of ATF Form 3. I used to just say ground shipping but in light of the policy changes with UPS/FedEx/USPS I have been reading about it may be best to figure out shipment when the time comes. Payment terms are certified funds, discreet electronic funds transfer from your business account, or business check from your SOT. Visa/MC/Discover would incur +4%. Obviously you must have a FFL/SOT with a valid law letter to purchase. This is on the inexpensive side of belt feds and parts kits have dried up so this probably won't last long. Payment terms are 100% up front to secure the item. Then please have a law letter within 30 days so we can initiate the transfer. Thank you.
  4. Spreadfire Arms
    This email has reared its ugly head again. I just got it. Email sent was from “inversefirearm@gmail.com”
  5. Spreadfire Arms
    Are you only looking for NIB or a clean used one as well?
  6. Spreadfire Arms
    Looking to get an approximate value for a post-86 dealer sample (select fire) IWI Tavor X95? Factory, 98% condition, about 100-200 rounds fired for one demo. Assuming that a law letter would be required.....thx.
  7. Spreadfire Arms
    No reason to void anything. Thanks for your advice. They can just build as SBR.
  8. Spreadfire Arms
    I found a local guy but he just had surgery on his rotator cuff so he is out for at least a month. if you can do it quicker shoot me a price and I can run it by them.
  9. Spreadfire Arms
    ATF told them Form 10. That was their call. I’m not sure I would want a regular 01 doing conversion work, I would hope an 07/02 but i suppose legally that is what you’re referring to. Their brand of lower receivers was not specified. I’ll run that possible scenario by them if they can find a guy who will let them use the equipment. But I think since it is for duty they probably want someone who knows what their doing.
  10. Spreadfire Arms
    I have a small LE agency that has ATF-approved Form 10's in hand for two AR15 lower receivers. They have the AR15 stripped lower receivers. They need to be converted to M16 specifications (lower receivers milled/drilled for M16 FCG and sear pin holes). As NFA paperwork is approved the work will simply need to be completed and then the stripped lowers shipped directly to the agency. Only the conversion work needs to be done, not any additional assembly. If you are a licensed 07/02 who can handle this work please email me the price for the labor (total for two lower receivers). Thanks. Email is spreadfirearmsREMOVETHIS@aol.com
  11. Spreadfire Arms
    M14 sold UZI still available. Valid PD Demo Letter required! NFA is evidently calling on every single one now.....Thanks.
  12. Spreadfire Arms
    Both SPF
  13. Spreadfire Arms
    I have two used post-86 Dealer Samples I am putting up for sale. Both require FFL/SOT and valid PD Demo Letter. It is the buyer’s responsibility to ensure the demo letter will pass ATF scrutiny. As you know they are now calling the CLEO who signed off on the letter to make sure they know what they signed and are requesting the T&E demonstration. Absolutely no refunds, especially if the buyer fails to obtain the law letter. Israeli UZI. Produced by Israel Military Industries (IMI), imported into US by Century Arms. It is a factory machine gun. Appears to have been refinished. Has the safe/semi/full selector. Has the folding stock and one 25-round magazine. Open bolt. Caliber 9mm. Norinco M14. Produced in China, it is a clone of the US M14 military rifle and from my understanding accepts USGI and other M14 parts. It has a semi/full selector. I found that the safety lever sticks so may just need some CLP in the trigger mechanism. Wood stock (Chinese wood, typical type found on all Chicom guns) and comes with one 20-round magazine. Accepts standard M14 magazines. Comes with the sling as pictured. Caliber .308. Asking Price is $1000 each + $50 shipping each UPS/FedEx Ground with insurance to lower 48. Or buy both and I will pay the shipping to lower 48. AK/HI/PR etc would probably cost additional, and would most likely go out US Postal Service instead to save money. Not looking to chop up as parts kits. Payment terms are 100% funds up front and of course obligatory PD Demo Letter to initiate eForm 3 transfer. As you know this transfer will clear quickly so long as the demo letter is legit. All sales final.
  14. Spreadfire Arms
    SPF
  15. Spreadfire Arms
    I have two used post-86 Dealer Samples I am putting up for sale. Both require FFL/SOT and valid PD Demo Letter. It is the buyer’s responsibility to ensure the demo letter will pass ATF scrutiny. As you know they are now calling the CLEO who signed off on the letter to make sure they know what they signed and are requesting the T&E demonstration. Israeli UZI. Produced by Israel Military Industries (IMI), imported into US by Century Arms. It is a factory machine gun. Appears to have been refinished. Has the safe/semi/full selector. Has the folding stock and one 25-round magazine. Open bolt. Caliber 9mm. Norinco M14. Produced in China, it is a clone of the US M14 military rifle and from my understanding accepts USGI and other M14 parts. It has a semi/full selector. I found that the safety lever sticks so may just need some CLP in the trigger mechanism. Wood stock (Chinese wood, typical type found on all Chicom guns) and comes with one 20-round magazine. Accepts standard M14 magazines. Comes with the sling as pictured. Caliber .308. Asking Price is $1000 each + $50 shipping UPS/FedEx Ground with insurance to lower 48. Or buy both and I will pay the shipping to lower 48. AK/HI/PR etc would probably cost additional, and would most likely go out US Postal Service instead to save money. Not looking to chop up as parts kits. Payment terms are 100% funds up front and of course obligatory PD Demo Letter to initiate eForm 3 transfer. All sales final. Photos attached, were taken yesterday (2/13/19).
  16. Spreadfire Arms
    SPF thanks
  17. Spreadfire Arms
    I have a used Post-86 Dealer Sample HK UMP 45 with Gemtech UMP silencer. The HK is all factory with a 0-1-2 trigger pack. It is a registered machine gun but in its current state only has semi and 2RB settings. This is obviously solved with installation of a F/A trigger pack. When I got the silencer the quick detach mount did not correctly seat on the flange on the barrel. As such I contacted Gemtech. This is a known issue, as Gemtech said, due to the variations in the flange on the barrel. Gemtech had me send them the MG and silencer and they threaded the barrel .578 x 28 and modified their silencer to match the threads. They also added a thread protector. I have test fired the weapon and silencer and it works correctly without baffle strike. Comes with one factory magazine. I may have a few more but I have to make sure I have them before I say I do. Both are on a Form 3 in my inventory and will be e-Filed to you. PD Demo Letter is required for the MG. I am not looking to separate the items nor am I looking to cut them up into parts kits. Asking $2200 delivered UPS/FedEx Ground to lower 48. Can accept business check/certified funds via photo of check front/back, or via CC (Visa/MC/Amex) +3.5%. Buyer’s responsibility to obtain PD Letter. I will take pictures shortly and post. Any inquiries please contact me via email at spreadfirearmsREMOVETHIS@aol.com or post below. I will monitor this thread periodically so email is probably easiest way to get a hold of me. Spreadfire Arms FFL/SOT 03 Austin, TX
  18. Spreadfire Arms
    Both sold thanks!
  19. Spreadfire Arms
    PM sent with # Still available
  20. Spreadfire Arms
    Selling one silencer and one post-86 dealer sample machine gun: 1. Knight’s Armament Company (KAC) H&K KAC Navy 10mm/.40 MP5 silencer, used. Very hard to get. This is a threaded silencer. All 100% factory KAC. $750 + $30 shipping to lower 48. Will ship out after approval on e-Form 3, which usually takes 1-2 days to clear NFA. Photos below. Of course no PD Demo Letter needed. 2. Ruger AC556 (Factory, not a conversion) - Used, 5.56mm, Wood Stock, Blued, Safe/Semi/3-RB/Full selector. 16” barrel. Photos on bottom post. Comes with a 20-round magazine. I have shot this with no issues. $950 + $50 shipping to lower 48. Post-86 DS and will require a PD Demo Letter. Photos below. 100% payment up front to start the ATF forms. I will submit the ATF e-File upon receipt of FFL, SOT, Demo Letter (if applicable), and funds. We are not responsible for dealer transfer fees of ATF taxes, that is the responsibility of the buyer. Not looking for trades. Credit cards will incur +3.5% (V/MC/Discover). I do not accept checks. NO EXPORT SALES! Any questions please email. I maintain odd hours so calling me will most likely result in you talking to my voice mail Steve Ou Spreadfire Arms Austin, TX FFL/SOT 03 email: spreadfirearmsREMOVETHIS@aol.com
  21. Spreadfire Arms
    Reduced AC556 to $1k or best offer......law letter needed. Thanks all.
  22. Spreadfire Arms
    adding pics of Ruger AC556. Price reduced to $1250 + $50 shipping.
  23. Spreadfire Arms
    Both L1A1 SPF
  24. Spreadfire Arms
    Added photos of L1A1's. Will post photos of AC556 shortly. One with sling is the British, the one without the sling is the Ishapore (India). Price drop on the L1A1's to $1350 plus $50 shipping each, or take both for $1300 + $50 shipping each.
  25. Spreadfire Arms
    its yours......I know you're GTG! You know the drill!
×
×
  • Create New...