Jump to content

Tim D.

Captain
  • Posts

    25
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Tim D.

  1. I bought this from Dolf at Knob Creek in 2004. It is autographed with his signature & Knob Creek October 2004. The 4 can be mistaken for a 9. I know that it was 2004 as this was my 1st time at The Creek. This is the 3rd edition 2002. It is in excellent condition, I've never read it, so no wear & tear. Please email me at seneca939@junoREMOVE_THIS.com for quickest reply. Please don't send PM here. I rarely check them.
  2. Suitable for open bolt semi or SMG. To the best of my memory I purchased it from SWD. Test fired in an open bolt semi years ago. Email address > blockhead13 AT juno.com
  3. I'm assuming the you have an open bolt semi. If that is the case, you can register a bolt as the MG. One of the old conversion booklets said that all you have to do is eliminate the area on the bolt that actuates the trip. Get a replacement bolt to chop, don't mess up the original.
  4. WTS: Thompson 16" bbl. $85 + USPS I'm told that its for a 1927 semi. I bought it at Knob Creek a some years ago from Gun Parts. Never used, shows some handling wear.(it was in my sock drawer) Picture isn't of actual barrel, just what it looks like. E-mail me seneca939 at juno dot com. Please do not PM as I don't check boards often Thanks Tim D.
  5. I have 5 good mags for sale. Four of them have are same,1 of them is a bit different in "color". Payment by USPS money order or personal check. Please know your state & local laws regarding magazine capacity. I will not ship to NJ, NY, or any others states with mag restrictions. Please email me directly. You can contact me at blockhead13XXX@juno.com Remove the XXX to email. Magazines ship from Pennsylvania, USPS flat rate with insurance included.
  6. I've been told that this is a semi carrier assembly. This is for 5.45 X 39 Purchased as new, manufacturer unknown. Comes with the top cover shown. Price includes shipping & insurance. USPS money order is preferred form of payment. No PayPal, etc. Thanks for looking. E-mail me at blockhead13 At juno dot com
  7. Marked SD. Dates are 11/74, 4/76, 4/79. Shipped USPS Priority Mail / Insured. Payment by USPS money order. No shipping to NY, NJ, CA, or areas with restrictions. You're responsible for knowing your state and local laws. PLEASE DO NOT MESSAGE ME HERE, AS I DON'T CHECK IN OFTEN. Please E-mail me at blockhead13@juno.com I'll include (2) used MP5 15 round mags if you buy these
  8. WTS:M10 .45 bolt missing parts. This is a.45acp bolt which is missing the extractor & roll pin. Cocking knob included. Picture of bolt is similar, but 9mm (sold.) Also missing is the cocking knob retainer, spring, roll pin & buffer.. I believe it was purchased from FTF Industries.it isn't a Cobray item This uses an early style extractor, not sure if they're still avaialble. $65.00 shipped E-mail me at blockhead13XXX@juno.com remove XXX. Please do not PM me.
  9. I have an M10 bolt in 9mm. New, never used. Can't remember where I got it, I think FTF Industries. Can be used in SMG or early open bolt semis. It is for the standard style M10 mag. Cocking knob is included. The toaster oven isn't. :-) Please e-mail me directly blockhead13XXX@juno.com Remove XXX from e-mail.
  10. Sten loop stock, to the best of my knowledge this is original, not a repro. It is from a parts kit I purchased a long time ago. USPS Flat Rate shipping & insurance is included. USPS money order only. Please e-mail me directly. blockhead13XXX@juno.com Remove XXX
  11. I have (2) new P7M8 mags for sale. $200 for them shipped USPS insured. Postal money order only. Please e-mail me. Thanks, Tim D. blockhead13XXX@juno.com Remove XXX
  12. I need to check, but I’m pretty sure it’s double feed. Please email me instead of using the reply feature.
  13. Complete 9mm bolt assembly, with cocking knob. Never used. I think that I bought it from FTF . Price includes shipping & insurance. USPS money order preferred, but I'll take a check. Ships USPS flat rate box. FYI, my items ship from Allentown,Pa because NJ is a gun owner"s hell. E-mail me at blockhead13XXX@juno.com REMOVE XXX to email me. I don’t check the boards for replies, so please e-mail me. PICTURE OF BOLT.
  14. These are in good condition . Picture is of the actual mags. These can be modified for the S&W 76 and some other guns. They CANNOT be used with the LAGE MAX-31 upper that uses Suomi drums & coffin mags. Mags ship from Allentown, PA. via USPS Flate Rate Box. Payment via USPS money order or personal check. Checks must clear first. No shipping to NY, NJ, CA, CT, CO, D.C., HI, MA, MD, VT. and anywhere magazine restrictions apply. YOU'RE RESPONSIBLE FOR KNOWING YOUR STATE AND LOCAL LAWS. E-mail me at blockhead13XXX@juno.com REMOVE XXX Picture of mags.
  15. Selling for a friend of mine. As new, may have minor scratches. Feed ramp shows no sign of wear. Picture is "borrowed" from Brownell's Payment by USPS money order. Email me blockhead13XXX@juno.com Remove XXX Price includes shipping and insurance. .
  16. Posting again, they were sold but buyer never sent payment. As shown in picture. (Actual photo of the mags) 2 in box, 3 no boxes. I believe ATI imported them from Turkey when they were selling the MKE AT94 rifles and pistols. I'm pretty sure that I tried the 3 out in MKE AT94 clone with good results. Then I bought two more. You are responsible for knowing your local and state laws regarding ownership of these items. Ships USPS from Allentown, Pa. Not interested in any trades, selling off many items aquired over the years. I live in NJ, so the mags are stored in Pennsylvania. blockhead13XXX@juno.com REMOVE XXX to e-mail me. .
  17. . Picture is of the mags that are for sale. All magazines are 15 round. (5) Original S&W Stainless mags L.E. Only marked. (1) Mec-Gar blued, not L.E. marked. I bought these for my Marlin 9mm carbine. NJ law will most likely drop us down to 10 rds. soon. so I'm selling them now. Not interested in any trades. I prefer payment by USPS money order. Personal checks must clear before I ship items.. No shipments to California, NY, Hawaii, or where prohibited. You are responsible for knowing your local and state laws regarding ownership of these items. Remove XXX to email me. Thanks, Tim D. blockhead13XXX@juno.com
  18. As shown in picture. (Actual photo of the mags) 2 in box, 3 no boxes. I believe ATI imported them from Turkey when they were selling the MKE AT94 rifles and pistols. I'm pretty sure that I tried the 3 out in MKE AT94 clone with good results. Then I bought two more. You are responsible for knowing your local and state laws regarding ownership of these items. Ships USPS from Allentown, Pa. Not interested in any trades, selling off many items aquired over the years. I live in NJ, so the mags are stored in Pennsylvania. Remove XXX to email me. blockheadXXX13@juno.com "THE ONLY CONSTANT IN LIFE, IS CHANGE."
  19. These are all in good to very good condition. Some of them in excellent condition. To the best of my recollection all have finger loop. The picture is what they look like. (photo borrowed from the web) You are responsible for knowing your local and state laws regarding ownership of these items. I live in NJ, so the mags are stored in Pennsylvania. Ships via USPS from Allentown, Pa. Not interested in any trades, selling off many items aquired over the years. Remove XXX to email me. blockheadXXX13@juno.com "THE ONLY CONSTANT IN LIFE, IS CHANGE."
  20. Selling for a friend who lost interest, he bought a "K" clone pistol. This is an early ATI import. It has the crowned muzzle, comes with (1) 10 round magazine. To the best of my knowledge it is New Jersey legal. (if you're stuck here.) Gun is unfired as shipped to a dealer friend in Allentown, Pa. Ships from my dealer in Allentown, Pa. Shipping and insurance is included in the price. It looks similar to pic, no 30 round mag though. Price is firm, not interested in any trades. Thanks, Tim D. blockhead13REMOVE@juno.com remove REMOVE from e-mail address.
  21. I'll be going on Saturday with a friend who lives in Pa. Meeting up with other lucky Pa. residents.
  22. To the best of my knowledge NJ requires that you have a Retail Firearms license.. If ATF approves your license they notify NJ State Police that you have an FFL One of the reasons that Sarco moved to Pa. was that NJ refused to renew their state retail license. Also be advised that short barrelled rifles, short barrelled shotguns, silencers, and slingshots (Yes, slingshots) are prohibited weapons in NJ. Magazines are limited to 15 rounds. FFL's are OK to have mags over 15 rounds from what I've been told. If you don't live here, DO NOT move here. My current employment situation keeps me here. But I'll escape again one day! Click on the link for some info. http://www.njsp.org/firearms/firearms-faqs.shtml
×
×
  • Create New...