Jump to content

Ottomatik

Seaman
  • Posts

    27
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Ottomatik

  1. Please close post. thanks Buddy really appreciate the boards!!
  2. Thanks Kurt, I have already found one I am commited to.
  3. Just had one kicked to back of line for mistake...EFORM 4, sucks bad after 9 month wait, only doing paper from now on.
  4. Worked, thanks much Gunnerboy.
  5. I dont believe it has a Bolt Hold open, there is space open beneath the butterfly. I am not sure I put it back together correctly, I have never removed the bolt assembly, just inserted the detent of the recoil spring and slid the backplate down and locked it in. And for whatever reason I wanted to test the action so I pulled back on the charging handle and here I am. Should I try and install barrel now, I am concerned that its possible the threads wont align properly if there is perhaps cant in the reaward action of the bolt assembly. I can still charge backwards 2 more inches and get the the bolt assembly to move forward from there with light tapping on the trunion where the barrel is supposed to screw in, but it then stops as if there is a bolt hold open, I realize the whole assembly barrel included may cant or rock up out of plane during action, and maybe with out the barrel to retain position the bolt assembly is hanging up somewhere it is a large assembly with all the components. Thank you for the replys.
  6. Pulled the charging handle on SEMI M2HB back without barrel attached and now bolt assembly is locked to the rear. Not all the way back, about 2" off the back, can get it to slide forward for about 2" off the back by gently tapping the trunnion with wooden dowel but after about 2" of movement it stops. I dont have a barrel and would like to get the bolt assembly moved forward and release the pressure on the springs. I am new to the M2 platform and any help would be much appreciated, thanks in advance.
  7. Well packed, fast ship, good comms, it was a pleasure doin business with you sir, thank you,
  8. Thanks for reply, nice mount but not tall enough for any of my applications, best, Chris.
  9. Also interested in other mounts ect. for M2HB
  10. How much for the MG3's? Any other .50 gear? Thanks.
  11. Up for sale is a PCS built 52k, it's 1 of 5 out there. Built with new SW receiver, new PTR barrel 5.5", new trunnion, new PTR bolt correct x39 bolt, 15 degree LP, new US cock tube, handle, parts, and the balance Malay. It has sat in my safe for the past 5 years, never fired after built by Jeff. Other opportunities present and it is up for sale, this one is title 1 and will come with the Magpul mag, which lock up tight, have shot its brother repeatedly for years, rock solid, here is vid https://www.youtube.com/watch?v=nr7juMUwI0s Cross posted. 4500.
  12. ill take this if still available
×
×
  • Create New...