Brian Poling

Thanks for the kind words. We service them for free and take pleasure in backing our products. They are great all around SMGs.

Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia Current: $14,500 with suppressor ($15,000 starting May 1) Current: $13,850 without suppressor ($14,300 starting May 1) U45/U9 Package This package is a subgunner's dream. All in one box you've got a complete package to shoot 45ACP with Grease Gun mags or 9mm with Suomi drums and one suppressor to work with both calibers. Switching calibers simply requires changing the bolt, barrel, and magazine housing. It features a simple, smooth-running blow-back system. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. This gun is also ideal for use with a suppressor. The extra bolt weigh drastically slows the initial bolt blow-back thereby significantly reducing port noise common in open-bolt / blow-back SMGs. The package includes the following parts: • Stemple (STG) U45 Machine Gun with Heavy Bolt System: Variable weight bolt system with hydraulic buffer that allows shooters to customize performance with a variety of different ammo as well as the 45 to 9mm caliber conversion. • 2 x M3 Grease Gun Magazines • U9 Conversion (bolt, barrel, magazine housing) • 2 x Suomi Drums • 1 x Suomi Magazine • Custom Hard Case • 45 ACP suppressor for use with both 45 ACP and 9mm setups • Hogue grip • Magpul SLK stock (or Law Tactical Side Folding Setup) • foregrip, bipod, multi-tool, & barrel locknut/muzzle cap tool (sights not included) U45 Data Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering for slow M3 Grease-Gun-like shooting performance Magazine: M3 Grease Gun (unmodified) 30 rds Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 500-750 adjustable system with hydraulic buffer, Select Fire (safe-semi-full) Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28, to use common suppressor U9 (SF) Conversion Data: Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 550-800 adjustable Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28 to use common suppressor Transferable In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. They are ‘new’ Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers. Simple / Durable Design Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam. Customizable By using Picatinny rails (MIL-STD-1913) for sights and hand guards, shooters can add a variety of accessories and optics. The configurations with the Adjustable Bolt System use common AR pattern stocks and grips with hundreds of options currently available. Easy-to-Replace Parts There’s nothing on these guns that can’t be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back and forth. Available Service If you need service, we are here to support our products. Shoot Cheap Ammo We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Can't Get Too Hot These are ideal for machine-gun shoots. The low-pressure pistol ammo cannot create enough heat in the barrel to cause a malfunction or damage the gun. There's no gas system to clog, and the open-bolt system negates any cook-off risk. See videos of these guns in action at our Youtube Channel as well: https://www.youtube.com/user/brpcorp Spade Grip Setups Also Available: http://www.brpguns.com/stemple-stg-spade-grip-kit/ Linkup with our other customers via our Stemple STG Facebook Group: https://www.facebook.com/groups/110088872841613/ To our customers: I’m a firm believer in ‘try before you buy’. If you’d like to see and shoot some of our guns I’d encourage you to make a trip to our facility in GA. It would be our pleasure to host. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. We can also go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585 Here's a first look at the new parts we made for the Stemple 76/45 subguns for 2020. For 2020 we were doing most of the components in NiB grey like the gun pictured below. This high performance finish adds greater durability and ease of cleaning compared to the anodized finish. Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia $14,500 with suppressor $13,850 without suppressor U45/U9 Package This package is a subgunner's dream. All in one box you've got a complete package to shoot 45ACP with Grease Gun mags or 9mm with Suomi drums and one suppressor to work with both calibers. Switching calibers simply requires changing the bolt, barrel, and magazine housing. It features a simple, smooth-running blow-back system. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. This gun is also ideal for use with a suppressor. The extra bolt weigh drastically slows the initial bolt blow-back thereby significantly reducing port noise common in open-bolt / blow-back SMGs. The package includes the following parts: • Stemple (STG) U45 Machine Gun with Heavy Bolt System: Variable weight bolt system with hydraulic buffer that allows shooters to customize performance with a variety of different ammo as well as the 45 to 9mm caliber conversion. • 2 x M3 Grease Gun Magazines • U9 Conversion (bolt, barrel, magazine housing) • 2 x Suomi Drums • 1 x Suomi Magazine • Custom Hard Case • 45 ACP suppressor for use with both 45 ACP and 9mm setups • Hogue grip • Magpul SLK stock • foregrip, bipod, multi-tool, & barrel locknut/muzzle cap tool (sights not included) U45 Data Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering for slow M3 Grease-Gun-like shooting performance Magazine: M3 Grease Gun (unmodified) 30 rds Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 500-750 adjustable system with hydraulic buffer, Select Fire (safe-semi-full) Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28, to use common suppressor U9 (SF) Conversion Data: Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 550-800 adjustable Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28 to use common suppressor Transferable In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. They are ‘new’ Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers. Simple / Durable Design Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam. Customizable By using Picatinny rails (MIL-STD-1913) for sights and hand guards, shooters can add a variety of accessories and optics. The configurations with the Adjustable Bolt System use common AR pattern stocks and grips with hundreds of options currently available. Easy-to-Replace Parts There’s nothing on these guns that can’t be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back and forth. Available Service If you need service, we are here to support our products. Shoot Cheap Ammo We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Can't Get Too Hot These are ideal for machine-gun shoots. The low-pressure pistol ammo cannot create enough heat in the barrel to cause a malfunction or damage the gun. There's no gas system to clog, and the open-bolt system negates any cook-off risk. See videos of these guns in action at our Youtube Channel as well: https://www.youtube.com/user/brpcorp Spade Grip Setups Also Available: http://www.brpguns.com/stemple-stg-spade-grip-kit/ Linkup with our other customers via our Stemple STG Facebook Group: https://www.facebook.com/groups/110088872841613/ To our customers: I’m a firm believer in ‘try before you buy’. If you’d like to see and shoot some of our guns I’d encourage you to make a trip to our facility in GA. It would be our pleasure to host. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. We can also go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585

Price: 3,675 - ships free in lower 48 https://www.brpguns.com/green-jacket-finnish-russian-maxim-1910-parts-kit-and-display-setup-ships-free/ Original item: 1910 Russian / Finnish Maxim Parts kit with Left Side Plate. No right side plate. Actual Item Pictured. Condition as shown Very interesting brass support on top cover. Includes Finnish SA marked hose connector Desirable steel feed block Late pattern rear sight Repainted Barrel Jacket and setup as a display or ready for your semi or C2 build. Small dent in barrel jacket (see pic) Excellent condition internal parts. Barrel looks unused Order online or call BRP CORP Office/Fax: 678-425-9585 -------------------------------- Other Maxim Parts for sale: https://www.brpguns.com/maxim-guns/

Here's a first look at the new parts we made for the Stemple 76/45 subguns for 2020. For 2020 we were doing most of the components in NiB grey like the gun pictured below. This high performance finish adds greater durability and ease of cleaning compared to the anodized finish. Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia $14,500 with suppressor $13,850 without suppressor U45/U9 Package This package is a subgunner's dream. All in one box you've got a complete package to shoot 45ACP with Grease Gun mags or 9mm with Suomi drums and one suppressor to work with both calibers. Switching calibers simply requires changing the bolt, barrel, and magazine housing. It features a simple, smooth-running blow-back system. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. This gun is also ideal for use with a suppressor. The extra bolt weigh drastically slows the initial bolt blow-back thereby significantly reducing port noise common in open-bolt / blow-back SMGs. The package includes the following parts: • Stemple (STG) U45 Machine Gun with Heavy Bolt System: Variable weight bolt system with hydraulic buffer that allows shooters to customize performance with a variety of different ammo as well as the 45 to 9mm caliber conversion. • 2 x M3 Grease Gun Magazines • U9 Conversion (bolt, barrel, magazine housing) • 2 x Suomi Drums • 1 x Suomi Magazine • Custom Hard Case • 45 ACP suppressor for use with both 45 ACP and 9mm setups • Hogue grip • Magpul SLK stock • foregrip, bipod, multi-tool, & barrel locknut/muzzle cap tool (sights not included) U45 Data Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering for slow M3 Grease-Gun-like shooting performance Magazine: M3 Grease Gun (unmodified) 30 rds Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 500-750 adjustable system with hydraulic buffer, Select Fire (safe-semi-full) Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28, to use common suppressor U9 (SF) Conversion Data: Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 550-800 adjustable Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28 to use common suppressor Transferable In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. They are ‘new’ Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers. Simple / Durable Design Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam. Customizable By using Picatinny rails (MIL-STD-1913) for sights and hand guards, shooters can add a variety of accessories and optics. The configurations with the Adjustable Bolt System use common AR pattern stocks and grips with hundreds of options currently available. Easy-to-Replace Parts There’s nothing on these guns that can’t be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back and forth. Available Service If you need service, we are here to support our products. Shoot Cheap Ammo We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Can't Get Too Hot These are ideal for machine-gun shoots. The low-pressure pistol ammo cannot create enough heat in the barrel to cause a malfunction or damage the gun. There's no gas system to clog, and the open-bolt system negates any cook-off risk. See videos of these guns in action at our Youtube Channel as well: https://www.youtube.com/user/brpcorp Spade Grip Setups Also Available: http://www.brpguns.com/stemple-stg-spade-grip-kit/ Linkup with our other customers via our Stemple STG Facebook Group: https://www.facebook.com/groups/110088872841613/ To our customers: I’m a firm believer in ‘try before you buy’. If you’d like to see and shoot some of our guns I’d encourage you to make a trip to our facility in GA. It would be our pleasure to host. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. We can also go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585

Sorry about that. I forgot to post this with the ad - $14k: https://www.brpguns.com/custom-shop-stemple-takedown-gun-stg-34k/

Stemple Takedown Gun (STG) 34k On Form 3 in Georgia - Fast E-Form Transfer to your FFL 9mm - take all Suomi Drums and mags Select Fire with MG34 fire control system Custom setup with Duracoat tan magazine housing over anodized aluminum. $14k https://www.brpguns.com/custom-shop-stemple-takedown-gun-stg-34k/ The STG34k features a simple, smooth-running blow-back system similar to the Suomi M31 which yields a cyclic rate of 750 rounds per minute. This setup is assembled using a Stemple 76/45 receiver, newly manufactured Stemple-compatible parts, and an MG34 fire-control with the same select-fire trigger system. Selecting semi or fully-automatic fire is simply done by moving your trigger finger to the top or bottom of the 'W' shaped trigger. Pulling the upper 'E' position on the trigger enables semi-automatic fire; pulling the lower 'D' position enables fully-automatic fire. These are ‘takedown’ systems of interlocking subassemblies that can be easily attached to and removed from the 76/45 receiver. Parts and Accessories Included With This Gun: Custom Hard Case 2 drums 1 magazine Multi-tool Spare buffer Setup: Short/Fixed stock setup with rubber pad and 10.35” stainless barrel with aluminum rail pattern shroud Transferable In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. If you are going to buy a transferable machine gun for some serious shooting, you should consider the Stemple Takedown Guns for these reasons: They are ‘new’ Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers. Simple / Durable Design Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam. Customizable By using Picatinny rails (MIL-STD-1913) for sights and hand guards, shooters can add a variety of accessories and optics. Easy-to-Replace Parts There’s nothing on these guns that can’t be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back and forth. Available Service If you need service, we are here to support our products. Shoot Cheap Ammo We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Capacity and Control These guns use 70 round drums and are smooth cycling, heavy, accurate, and comfortable to hold. It's basically an assault rifle with a sub-caliber setup... a very controllable and accurate gun in full auto. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. The 'laser beam' performance of this gun makes it one of the most enjoyable full auto guns you'll ever shoot. Can't Get Too Hot These are ideal for machine-gun shoots. The low-pressure pistol ammo cannot create enough heat in the barrel to cause a malfunction or damage the gun. There's no gas system to clog, and the open-bolt system negates any cook-off risk. Select-Fire with Quick-Change Barrel Caliber: 9mm Weight: 8 lbs with 10.35" barrel setup Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums Each gun has a treaded barrel for a suppressor (1/2 - 28) (sights not included) Add Silencer: $425

Stemple 76/45 Takedown Gun (STG) Price Increase Announcement Effective March 1, 2019, STG machine gun prices will be increasing by $500 per gun. In 2003, the original inventor, John Stemple, collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. The STGs have earned an excellent reputation for reliability, durability, and versatility among class 3 collectors old and new. We are continually improving and expanding the options and accessories for these guns while providing excellent support and service to our longtime customers. We put a lot of thought into preserving the long-term value of the Stemple 76/45 machine guns in the STG parts design. The STG concept follows three basic design goals: 1) Protect the registered receiver from damage or wear so it doesn’t matter how much the gun is used. 2) Ensure any wear parts can be easily serviced and/or replaced when necessary. 3) Employ a flexible component design that is adaptive to alternative configurations, caliber conversions, and accessories. Since nothing is welded or hand-fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely-built and smooth-running submachine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. A special thank you to the class 3 collectors old and new who already own a Stemple Takedown Gun (STG). Without you, none of this would be possible. (Current Prices Listed Below) $14K $12.9K $12.9K STG U9 $13.5K STG 34k $12.9K JR Stemple Shoot 2018

$14,000 Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia U45/U9 Package This package is a subgunner's dream. All in one box you've got a complete package to shoot 45ACP with Grease Gun mags or 9mm with Suomi drums and one suppressor to work with both calibers. Switching calibers simply requires changing the bolt, barrel, and magazine housing. It features a simple, smooth-running blow-back system. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. This gun is also ideal for use with a suppressor. The extra bolt weigh drastically slows the initial bolt blow-back thereby significantly reducing port noise common in open-bolt / blow-back SMGs. The package includes the following parts: • Stemple (STG) U45 Machine Gun with Heavy Bolt System: Variable weight bolt system with hydraulic buffer that allows shooters to customize performance with a variety of different ammo as well as the 45 to 9mm caliber conversion. • 2 x M3 Grease Gun Magazines • U9 Converison (bolt, barrel, magazine housing) • 2 x Suomi Drums • 1 x Suomi Magazine • Custom Hard Case • 45 ACP suppressor for use with both 45 ACP and 9mm setups • foregrip, bipod, multi-tool, & barrel locknut/muzzle cap tool (sights not included) U45 Data Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering for slow M3 Grease-Gun-like shooting performance Magazine: M3 Grease Gun (unmodified) 30 rds Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 500-750 adjustable system with hydraulic buffer, Select Fire (safe-semi-full) Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28, to use common suppressor U9 (SF) Conversion Data: Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 550-800 adjustable Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28 to use common suppressor If you are going to buy a transferable machine gun for some serious shooting, you should consider the Stemple Takedown Guns for these reasons: 1) Best service and support in the industry. 2) Most reliable. 3) Most durable. 4) Most controllable. 5) Most versatile: We have alternate caliber and rate configurations. Picatinny rails on the top of the receiver and shroud provide a variety of accessory options. We also have several shroud and barrel options, grip options, and stock options. 6) No-compromise manufacturing: We always ask the question: "What is the best?" "What is the best material to use? What is the best process to make the part? What is the best metal finish?" etc. 7) Easy maintenance: Drop-on replacement parts in stock. 8) Less expensive than comparable machine guns. 9) Modern gun: No "old world craftsmanship" or hand-fitting. We adhere to strict quality control to ensure interchangeable parts. 10) Shoot cheap ammo: We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. 11) Free factory training for our users. 12) Great investment: Just ask someone who bought a transferable machine gun 15 years ago how they feel about their purchase. Most of them will say they wish they bought more. Our supply of these great transferable machine guns is dwindling, prices will be increasing, and there will not be any more due to the 1986 ban. Don’t miss out!

Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia - Fast E-Form Transfer to your FFL $12,900 In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. The Stemple STG M1A1/1928 is assembled from an original Stemple 76/45 machine gun receiver, newly made Stemple-compatible parts, and several original Thompson components. The Stemple 76/45 machine gun receiver inserts into a long receiver shroud. This holds the receiver in position with lower assembly and aligns the sear opening in the Stemple receiver with the new sear in the original Thompson fire control group. The bolt guide, bolt, barrel, mainspring, buffer, and guide rod assembly is a removable unit inserted through the front of the Stemple receiver. These main wear parts are easily repaired or replaced if necessary. The overall appearance of the STG M1A1/1928 is like that of an original M1A1, with the exception that the rectangular adapter housing for the Stemple 76/45 receiver tube is 3/16 in. taller and 3/4 in. longer than the original M1A1. Parts and Accessories Included With Each Gun:1 x 50 rd drum, 1 x 20rd mag, multi tool, wrench, vertical or horizontal foregrip, both picatinny rear sight & standard "L" sight, both barrels 10" M1A1 pattern barrel & 8" threaded barrel .578x28, and custom hard case with high density foam. Free Factory Training. 45 ACP Suppressor: add $425 STG M1A1/1928 Data Caliber: .45 acp Barrel Length: 10.5 in. M1 Pattern Barrel and 8 in. Threaded Barrel (.578-28) Magazine: Unmodified USGI M1A1/1928 Mags and Drums Rear Sight: Original M1A1 or "L" for 1928, and Picatinny Rail included Forend: vertical (reproduction) or horizontal (original) Cycle Rate: 750 rpm (Full-Auto/Safe only... no semi-auto function) Weight: 11 lbs (unloaded) Simple / DurableDesign: Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Easy-to-Replace Parts: There's nothing on these guns that cant be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back-and-forth. Available Service: If you need service, we are here to support our products. Shoot Cheap Ammo: We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Can't Get Too Hot: These are ideal for machine-gun shoots. The low-pressure 45ACP round cannot create enough heat in the barrel to damage the gun. There's no gas system to clog, and the open-bolt system negates any cook-off risk. Great Investment: Just ask someone who bought a transferable machine gun 10-20 years ago how they feel about their purchase. Most of them will say they wish they bought more. Also ask someone who sold a machine gun 10-20 year ago how they feel about the sale. Most of them will say they wish they never sold it. Since the ban on new registrations in 1986, the finite supply of transferable machine guns availble for individuals in the US has steadily appreciated in value. We put a lot of thought into preserving the Long-Term Value of these guns. They are designed for maximum durability and serviceability. The worst thing that can happen to a transferable machine gun is a damaged or broken receiver. The parts that can wear out in these STG configurations are not the registered parts. Further, the moving and impacted parts in the system are overbuilt for their function and easy to replace if necessary: minimal effort, zero fitting, and no need to send the gun to a specialist for repair. We stock plenty of spare parts and provide free service. These guns will outlast anything on the transferable market. To our customers: I’m a firm believer in ‘try before you buy’. If you’d like to see and shoot some of our guns I’d encourage you to make a trip to our facility in GA. It would be our pleasure to host. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. We can also go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585 http://www.brpguns.com/stemple-76-45-takedown-gun-stg-m1a1-1928-setup/

Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia - Fast E-Form Transfer to your FFL $12,900 In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. The Stemple STG M1A1/1928 is assembled from an original Stemple 76/45 machine gun receiver, newly made Stemple-compatible parts, and several original Thompson components. The Stemple 76/45 machine gun receiver inserts into a long receiver shroud. This holds the receiver in position with lower assembly and aligns the sear opening in the Stemple receiver with the new sear in the original Thompson fire control group. The bolt guide, bolt, barrel, mainspring, buffer, and guide rod assembly is a removable unit inserted through the front of the Stemple receiver. These main wear parts are easily repaired or replaced if necessary. The overall appearance of the STG M1A1/1928 is like that of an original M1A1, with the exception that the rectangular adapter housing for the Stemple 76/45 receiver tube is 3/16 in. taller and 3/4 in. longer than the original M1A1. Parts and Accessories Included With Each Gun: 1 x 50 rd drum, 1 x 20rd mag, multi tool, wrench, vertical or horizontal foregrip, both picatinny rear sight & standard "L" sight, both barrels 10" M1A1 pattern barrel & 8" threaded barrel .578x28, and custom hard case with high density foam. Free Factory Training. 45 ACP Suppressor: add $425 STG M1A1/1928 Data Caliber: .45 acp Barrel Length: 10.5 in. M1 Pattern Barrel and 8 in. Threaded Barrel (.578-28) Magazine: Unmodified USGI M1A1/1928 Mags and Drums Rear Sight: Original M1A1 or "L" for 1928, and Picatinny Rail included Forend: vertical (reproduction) or horizontal (original) Cycle Rate: 750 rpm (Full-Auto/Safe only... no semi-auto function) Weight: 11 lbs (unloaded) Simple / DurableDesign: Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Easy-to-Replace Parts: There's nothing on these guns that cant be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back-and-forth. Available Service: If you need service, we are here to support our products. Shoot Cheap Ammo: We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Can't Get Too Hot: These are ideal for machine-gun shoots. The low-pressure 45ACP round cannot create enough heat in the barrel to damage the gun. There's no gas system to clog, and the open-bolt system negates any cook-off risk. Great Investment: Just ask someone who bought a transferable machine gun 10-20 years ago how they feel about their purchase. Most of them will say they wish they bought more. Also ask someone who sold a machine gun 10-20 year ago how they feel about the sale. Most of them will say they wish they never sold it. Since the ban on new registrations in 1986, the finite supply of transferable machine guns availble for individuals in the US has steadily appreciated in value. We put a lot of thought into preserving the Long-Term Value of these guns. They are designed for maximum durability and serviceability. The worst thing that can happen to a transferable machine gun is a damaged or broken receiver. The parts that can wear out in these STG configurations are not the registered parts. Further, the moving and impacted parts in the system are overbuilt for their function and easy to replace if necessary: minimal effort, zero fitting, and no need to send the gun to a specialist for repair. We stock plenty of spare parts and provide free service. These guns will outlast anything on the transferable market. To our customers: I’m a firm believer in ‘try before you buy’. If you’d like to see and shoot some of our guns I’d encourage you to make a trip to our facility in GA. It would be our pleasure to host. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. We can also go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585 http://www.brpguns.com/stemple-76-45-takedown-gun-stg-m1a1-1928-setup/

BRP Stemple 76 - STG U7.62 Setup (special nickel boron edition) Transferable MG - Unused / new condition: on Form 3 in Georgia $13,000 Parts and Accessories Included With This Gun: foregrip, bipod, 5 PPS-43 magazines, multi-tool, barrel locknut/muzzle cap tool, 9mm barrel for the 9mm conversion The STG Universal 7.62 is our 7.62x25 setup for the Stemple 76/45 machine gun. It features a simple, smooth-running blow-back system. It makes use of an adjustable-weight bolt system to dissipate the energy in the recoiling mass. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. As such it can shoot high pressure 7.62X25 and relatively weak 9mm ammo at very low cyclic rates. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. It also easily converts to 9mm simply by changing the barrel and running the 9mm though the PPS43 magazines. This particular one is a special edition that has NiB One™ plating on the lower housing assembly, shield, buffer tube, and barrel jacket. The trigger pack on this gun is the Swedish M37 pattern with a large trigger guard opening compared to the KP31 trigger packs we normally use. If you are going to buy a transferable machine gun for some serious shooting, you should consider the Stemple Takedown Guns for these reasons: They are ‘new’: Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers. Simple / Durable Design: These guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam. Versatile: Takes standard AR grips, Ace pattern & AR pattern stocks, as well as a variety of shroud, barrel, & mounting options. Easy to Replace Parts: There’s nothing on these guns that can’t be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back and forth. Available Service: If you need service, we are here to support our products. Shoot Cheap Ammo: We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. (sights not included) Action: Open Bolt and Select-Fire Caliber: 9mm and 7.62x25 Barrel: Quick-Change. Weight: 8 lbs with Aluminum shroud setup Magazine: original PPS-43 (capacity 35) This Stemple 76/45 setup is part of "Universal" series and is fully compatible with the other setups and packages in the product line (e.g. U45, U9, U9SF, 34k, U7.62, & STG76 setups). To our customers: It is our pleasure to offer our customers free training at our facility near Athens, GA. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. If time allows, we can go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585 Here's how they cycle with Romanian 7.62x25 surplus SMG ammo:

$14,000 Transferable MG - NEW/Unused condition Several in stock On Form 3 in Georgia U45/U9 Package This package is a subgunner's dream. All in one box you've got a complete package to shoot 45ACP with Grease Gun mags or 9mm with Suomi drums and one suppressor to work with both calibers. Switching calibers simply requires changing the bolt, barrel, and magazine housing. It features a simple, smooth-running blow-back system. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. This gun is also ideal for use with a suppressor. The extra bolt weigh drastically slows the initial bolt blow-back thereby significantly reducing port noise common in open-bolt / blow-back SMGs. The package includes the following parts: • Stemple (STG) U45 Machine Gun with Heavy Bolt System: Variable weight bolt system with hydraulic buffer that allows shooters to customize performance with a variety of different ammo as well as the 45 to 9mm caliber conversion. • 2 x M3 Grease Gun Magazines • U9 Converison (bolt, barrel, magazine housing) • 2 x Suomi Drums • 1 x Suomi Magazine • Custom Hard Case • 45 ACP suppressor for use with both 45 ACP and 9mm setups • foregrip, bipod, multi-tool, & barrel locknut/muzzle cap tool (sights not included) U45 Data Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering for slow M3 Grease-Gun-like shooting performance Magazine: M3 Grease Gun (unmodified) 30 rds Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 500-750 adjustable system with hydraulic buffer, Select Fire (safe-semi-full) Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28, to use common suppressor U9 (SF) Conversion Data: Select-Fire with Quick-Change Barrel Ultra-smooth adjustable-weight bolt system with hydraulic buffering Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums Nickel Boron Plated Bolt and Mag Housing Weight: 9.3 lbs Cycle Rate: 550-800 adjustable Stainless Steel Barrel Barrel Length: 10.35" threaded .578-28 to use common suppressor Transferable In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. There is only a limited number of these pre-1986 registered/transferable machine guns remaining, so get one while they last. They are ‘new’ Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers. Simple / Durable Design Our guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam. Customizable By using Picatinny rails (MIL-STD-1913) for sights and hand guards, shooters can add a variety of accessories and optics. The configurations with the Adjustable Bolt System use common AR pattern stocks and grips with hundreds of options currently available. Easy-to-Replace Parts There’s nothing on these guns that can’t be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back and forth. Available Service If you need service, we are here to support our products. Shoot Cheap Ammo We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Can't Get Too Hot These are ideal for machine-gun shoots. The low-pressure pistol ammo cannot create enough heat in the barrel to cause a malfunction or damage the gun. There's no gas system to clog, and the open-bolt system negates any cook-off risk. Spade Grip Setups Also Available: http://www.brpguns.com/stemple-stg-spade-grip-kit/ Linkup with our other customers via our Stemple STG Facebook Group: https://www.facebook.com/groups/110088872841613/ Please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585

Bren Mk. 2 Short Cut Receiver Section w/ LOW GRADE parts $379.95 We've got approx 10 of these in stock at www.brpguns.com Link: http://www.brpguns.com/bren-mk-2-short-cut-receiver-section-w-low-grade-parts/ Original Items: THESE ARE CUT CLOSE TO THE LOCKING SHOULDER, AND A CHEAPER THAN THE OTHER RECEIVERS IN OUR INVENTORY FOR THAT REASON. These are kits. All the parts are the same but might be in slightly different condition than pictured. - 1 1943 INGLIS CUT RECEIVER SECTION - 2 Slide/Butt stock Pins - 1 Trigger - 1 Sling Swivels - 1 Slide (decent condition) - 1 Butt Stock - 1 Main Spring - 1 Butt Plate - 1 Cocking Handle Cover - 1 Muzzle - 1 Barrel Nut - 1 Spring Tube - 1 Stripped Tripping Lever - 1 Butt Stock Bracket - 1 Combo Tool - 1 Regulator w/retaining pin - 1 Cleaning Plug 2nd Pattern

Transferable MG - Unused / new condition: on Form 3 in Georgia $12,200 The STG Universal 7.62 is our 7.62x25 setup for the Stemple 76/45 machine gun. It features a simple, smooth-running blow-back system. It makes use of an adjustable-weight bolt system to dissipate the energy in the recoiling mass. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. As such it can shoot high pressure 7.62X25 and relatively weak 9mm ammo at very low cyclic rates. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. It also easily converts to 9mm simply by changing the barrel and running the 9mm though the PPS43 magazines. This particular one is a special edition that has NiB One™ plating on the lower housing assembly, shield, buffer tube, and barrel jacket. The trigger pack on this gun is the Swedish M37 pattern with a large trigger guard opening compared to the KP31 trigger packs we normally use. If you are going to buy a transferable machine gun for some serious shooting, you should consider the Stemple Takedown Guns for these reasons: They are ‘new’: Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers. Simple / Durable Design: These guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam. Versatile: Takes standard AR grips, Ace pattern & AR pattern stocks, as well as a variety of shroud, barrel, & mounting options. Easy to Replace Parts: There’s nothing on these guns that can’t be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back and forth. Available Service: If you need service, we are here to support our products. Shoot Cheap Ammo: We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Parts and Accessories Included With This Gun: foregrip, bipod, 5 PPS-43 magazines, multi-tool, barrel locknut/muzzle cap tool, 9mm barrel for the 9mm conversion (sights not included) Action: Open Bolt and Select-Fire Caliber: 9mm and 7.62x25 Barrel: Quick-Change. 10” for 7.62x25, available lengths for 9mm setup: 10”, 12.75”, and 16” Weight: 8 lbs with Aluminum shroud setup, Magazine: original PPS-43 (capacity 35) This Stemple 76/45 setup is part of "Universal" series and is fully compatible with the other setups and packages in the product line (e.g. U45, U9, U9SF, 34k, U7.62, & STG76 setups). To our customers: It is our pleasure to offer our customers free training at our facility near Athens, GA. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. If time allows, we can go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585

BRP Stemple 76: U9 Setup Transferable MG - Unused / new condition: on Form 3 in Georgia $11,800 The STG Universal 9 (U9) is our most popular setup for the Stemple 76/45 machine gun. It features a simple, smooth-running blow-back system similar to the Suomi M31 which yields a cyclic rate of 750 rounds per minute. These are the among most smooth, controllable, and versatile subguns on the transferable market. If you are going to buy a transferable machine gun for some serious shooting, you should consider the Stemple Takedown Guns for these reasons: They are ‘new’: Well, the receivers are nearly 30 years old but the Stemple Takedown Gun (STG) setups are complete new parts packages installed on unused pre-1986 transferable Stemple 76/45 machine gun receivers. Simple / Durable Design: These guns are very difficult to break and very easy to fix. They are simple blow-back guns and very smooth-running in long full-auto bursts. Some of our customers who own the 9mm guns liken the full-auto performance to a laser beam. Versatile: Takes standard AR grips, Ace pattern & AR pattern stocks, as well as a variety of shroud, barrel, & mounting options. Easy to Replace Parts: There’s nothing on these guns that can’t be easily replaced. We designed this system to protect the registered receiver from any wear during use. The only parts that can wear can be easily replaced without the need to ship the gun back and forth. Available Service: If you need service, we are here to support our products. Shoot Cheap Ammo: We typically just shoot steel-cased ammo. Our milled steel trunions easily deal with potential wear issues from any type of ammo. Capacity and Control: These guns use 70 round drums and are smooth cycling, heavy, accurate, and comfortable to hold. It's basically an assault rifle with a sub-caliber setup... a very controllable and accurate gun in full auto. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. The 'laser beam' performance of this gun makes is one of the most enjoyable full auto guns you'll ever shoot. Parts and Accessories Included With This Gun: foregrip, bipod, 2 drums, 1 magazine, multi-tool, spare buffer, barrel locknut/muzzle cap tool, choice of barrel and shroud setup (sights not included) Package Deal: Includes all of the parts listed above as well as the Suppressor and Custom Hard Case (add $600) Action: Open Bolt and Select-Fire Caliber: 9mm Barrel: Quick-Change. Available lengths: 10.35”, 12.75”, and 16” Weight: 8 lbs with Aluminum shroud setup, 9.7 lbs with Suomi M31 shroud/barrel Magazine: Suomi 70-rd & 36-rd mags; Swedish M37/M45 25-rd and 50-rd “coffin” mags This Stemple 76/45 setup is part of "Universal" series and is fully compatible with the other setups and packages in the product line (e.g. U45, U9, U9SF, 34k, U7.62, & STG76 setups). To our customers: It is our pleasure to offer our customers free training at our facility near Athens, GA. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. If time allows, we can go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585

$13,000 Transferable MG - NEW/Unused condition on Form 3 in Georgia This package is a subgunner's dream. All in one box you've got a complete package to shoot 45ACP with Grease Gun mags or 9mm with Suomi drums and one suppressor to work with both calibers. Switching calibers simply requires changing the bolt, barrel, and magazine housing. It features a simple, smooth-running blow-back system. With the addition of a hydraulic buffer, these are the most smooth, controllable, and versatile subguns on the transferable market. It's so smooth due to the weight, layout, and action; you can actually watch your target being hit through a 4x scope while shooting long bursts. This setup utilizes AR pattern stocks, AR pattern grips, and multiple picatinny mount options for maximum versatility. The package include the following parts: • Stemple (STG) U45 Machine Gun with Heavy Bolt System: Variable weight bolt system with hydraulic buffer that allows shooters to customize performance with a variety of different ammo as well as the 45 to 9mm caliber conversion. • 2 x M3 Grease Gun Magazines • U9 Converison (bolt, barrel, magazine housing) • 2 x Suomi Drums • 1 x Suomi Magazine • Custom Hard Case • 45 ACP suppressor for use with both 45 ACP and 9mm setups • foregrip, bipod, multi-tool, & barrel locknut/muzzle cap tool (sights not included) U45 Data Select-Fire with Quick-Change Barrel Heavy Bolt System for M3 Grease-Gun-like shooting performance Magazine: M3 Grease Gun (unmodified) 30 rds Weight: 9.3 lbs Cycle Rate: 500-650 adjustable Barrel Length: 10.35" threaded .578-28 to use common suppressor U9 (SF) Conversion Data: Magazine: Suomi KP31 25 rd, 36 rd, 50 rd magazines and 40 rd & 70 rd drums Cycle Rate: 550-800 adjustable Barrel Length: 10.35" threaded .578-28 to use common suppressor ADD SPADE GRIP SETUP FOR $420 To our customers: I’m a firm believer in ‘try before you buy’. If you’d like to see and shoot some of our guns I’d encourage you to make a trip to our facility in GA. It would be our pleasure to host. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. We can also go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585

Stemple-Suomi setup with compensated shroud. Transferable MG - Unused / new condition: on Form 3 in Georgia $11,800 Caliber: 9mm Capacity: Suomi 70-rd & 36-rd mags; Swedish M37/M45 25-rd and 50-rd “coffin” mags Sights: Finnish KP31 & Picatinny compatible Cycle Rate: 750-950 (full-auto-only) Barrel Length: 13” with KP31 shroud This Stemple 76/45 setup is part of "Universal" series and is fully compatible with the other setups and packages in the product line (e.g. U45, U9, U9SF, 34k, U7.62, & STG76 setups). In 2003, the original inventor, John Stemple collaborated with BRP Corp to make new and replacement parts for the Stemple 76/45 receivers he manufactured prior to the 1986 cutoff. From this came a series of compatible drop-on parts for the unmodified/transferable Stemple 76/45 receivers known as Stemple Takedown Gun (STG) setups. Since nothing is welded or hand fitted to these receivers, changing setups and replacing parts is fast and easy. These are the most finely built and smooth running sub-machine guns on the transferable market. We build them for performance and durability, stock plenty of high-quality spare parts, and provide excellent service. STG-76W (Stemple Suomi 9mm): The Stemple Suomi closely resembles the original Finnish KP31 by using the original Finnish KP31 wood stocks, sights, and shrouds. The KP31 had some of the nicest 'furniture' ever put on a a sub machine gun. It can be equipped with short M37 barrel/shroud, M31 barrel/shroud, or suppressed setup. Bipods are available for all patterns. To accommodate the sear location of the Stemple receiver, we designed as new trigger system based on the MP40. Similarly, this configuration is full-auto-only. Parts and Accessories Included With This Gun: 1 x 36 rd magazine, 2 x 70 rd drums, bipod, multi-tool, sling, spare buffer, wooden transit chest (pictured below), and 2 spare picatinny accessory rails for the shroud mount bipod and top optic mount. To our customers: It is our pleasure to offer our customers free training at our facility near Athens, GA. We cover assembly, disassembly, maintenance, troubleshooting, and alternate configurations. This one-on-one course takes approximately 4 hours. If time allows, we can go to the nearby range to shoot as well. Please don’t hesitate to call or write if we can be of further assistance. Also, please go to our web site for more information, pictures, and videos of our products. www.brpguns.com info@brpguns.com Office/Fax: 678-425-9585