donwest

Still Available

Still available. Price reduced

Interested? Make an offer

I don't have a MG34 top cover for this magazine to test it. I have many MG15 magazines and this came with a purchased lot of MG15 parts. The tansion on the left and right springs feels good, like a MG15 magazine. My experience with MG15 mags makes think this will function, but again, I have not tested it. If you are interested, make an offer

I have for sale a complete trigger group for the US Lewis Machine Gun. This trigger group is specific for the US gun and will not work with the British or Japanese guns. The trigger group has been refinished and is in very good condition. $600 + shipping

Mag still available. Interested? Make an offer I have for sale a MG34 Double Saddle Magazine also called doppeltrommel made spefically for the MG34. This is not one of the commonly encountered MG15 magazines. The MG34 magazine is quite rare and I have only come across one other and it was completley rusted throughout. This magazine has substantial surface pitting but it is entact with no damage or holes in the body. You can see this magazine has external covers where the spring tension can be manually adjusted. The release latch is different where it has a raise portion not seen on MG15 mags. Internally, this magazine is unique in thst the left and right spring motors are fitted with wire typ springs instead of the strap springs found in the MG15 mags. You will need the MG34 top cover designed for this application, but these top covers are way more commonly found than the magazine. For the complete MG34 collector $1800 + shipping

I recently sold out of all the .308 Type 99 barrels I made. I have others requesting a barrel even after they all sold, so I am trying to gauge if there is enough interest/demand to make another run. Let me know

I used a sonic cleaner on my 9mm suppressor. It cleaned the suppressor but it also stripped off part of the external black finish

Yes, I still have the sights. Send me a PM if you are interested in purchasing a set Don

I am down to my last 2 barrels that I have for sale. If you have a Type 99 or are thinking of getting one, then you need to act quickly to secure a barrel in .308. The original 7.7x58 Arisaka is an excellent cartridge but will have to hand load to shoot in this caliber as there is no supply of surplus military ammo. Conversion to .308 (7.62x51) is your best option for shooting, and fortunately the original bolt and magazine will work for this caliber conversion. I did a run of these barrels 15 years ago (without the front sight/gas block included) and they all sold quickly. This is my last run of these barrels. Good Luck. Don

Still available, I have 2 sets left of these MG15 sights. These are excellent repro's of the original sights. If you have a MG15, you should have these correct sights for ground and antiaircraft sightining. If you are fortunate enough to have an original German set of these sights, you should have a spare set of repro sights to use for shooting your gun. Originals are far too rare and relatively fragile to take out for shooting. Not going to make any more.

Trying to find a antiaircraft stock that either fits ZB37 or Schwarzlose, as pictured. Or similar other stock Let me know what you have for sale........... Don

I have new made MG15 ground sights available for sale. These are new made, exact copies of the originals. Very hard to find originals and if you do find them they are usually broken, missing parts, rusted, pitted. The only other sights found today are the aircraft sights and most of those found are cheap, poor quality knock-offs from India, made of aluminum. These new sights are all steel, just like the original German ones. I have a few sets for sale, not many, as these were difficult to make with all the small intricate parts involved. $600 + shipping ($15)

I still have a few barrels available.

Still have some barrels left for sale. If you have a DEWAT Type 99 machine gun, this can be used to make it live again, with your approved Form 1 from ATF