Jump to content

PGT

Lieutenant
  • Posts

    103
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by PGT

  1. Price low market/fair to move it quickly....going for about 10% higher on GB on average.

    $2K + actual ship.  Funds via Zelle, cashiers check, personal check or USPS money orders and will ship for $35-50 or so via ShipMyGun (your FFL must accept from an individual; I put all my info in with the rifle for their bound book.

     

    This has a buffered carrier so later kit was used.  I'll get more pics in daylight tomorrow...it's already dark here.  Note, this black painted mag will not come with it; there's a grayish one that came with the rifle that will be included (pics on that tomorrow)

    https://imgur.com/a/jXAdj9V

     

    [img]https://i.imgur.com/Ndwwo1Ih.jpg[/img]


    Will be cross-posted on FALfiles, AKFiles and Arfcom

  2. Very clean M76 in .223/5.56. Getting harder to find and this is the nicest one to shoot (the tube folder looks cool but isn't much fun...I had both).

    $3750 $3450/shipped to lower 48 with one 15rd magazine (sling in pic not include as it was already sold...will need to check for a spare). Original manual included. Includes replacement repro plastic buttpad cover (the old ones ALL broke), new/old stock Valmet extractor, original extractor and installed WBP 5.56 extractor and new Wolff recoil spring (these 223 rifles were known to be over-gassed and original extractors could not always function optimally). Extra mags available.

    Zelle, check, USPS money orders. Will be shipped through ShipMyGun

    x-posted on AKFiles

    UrSERbSh.jpg

    zCiDKBbh.jpg

    Aib0nqsh.jpg

    AncNOFDh.jpg

    qp2wsk9h.jpg

    9sONGomh.jpg

    enxhg3Fh.jpg

    tu2IZhEh.jpg

    lyVYEh3l.jpg

    5eej5ILh.jpg

     

    rLAyevx.jpg

  3. Payment via Zelle, check or USPS money order(s). USPS Priority shipping at prevailing rate (I'll cover if you buy more than one item).

    A) Four 30rd Valmet 5.56 OEM magazines.  Three M76 (three rivet) and one M71 magazine (single rivet).   $475 on the M71, $500/ea on M76.  Yes, these are expensive but they're the average price on GB but with no tax/fees.  Last M76 sold on GB for 50% more than my asking price but most go at this rate not $700+. 

    Nlvxto2.jpg

    ------

    B) Fiskars bayonet and reindeer leather sheath.  $350

    hCBKb1H.jpg

     

    XBDcahQ.jpg

     

    FlimZEU.jpg

    ------

    C) MCP modified G33 mags for Valmet - 40rds.  $300/ea - two available 

    zuB4Uez.jpg

     

    x-posted on AKFiles/FALFiles 

  4. On 1/13/2023 at 6:27 AM, Kophjager said:

    Correct me if I am wrong. The pistol grip does not look like a factory original. It apparat’s to be an after market. 
     

    correct and the gas block is from a normal mini-14 not a side-folder with the side-sling loop.  That said, it's cool AF.  I've seen a lot of police mini-14's set up like this including the AR15 grip.  any form of GB sidefolder is sweet and the grip can be swapped back to original style easily.

  5. This is a complete rifle, built by Interfor using a Serbu barrel and Ess Brothers 80% receiver that they finished and built out.  Function is excellent...a very smooth shooter.  The finish and crafstmanship by Interfor is..ehh.  Remember that it's a kit build but it shoots great.  Also include a B&T picatinny rail adapter that fits in place of the carry handle and the original Italian magazine.

     

    $3675/shipped to lower 48 FFL to FFL

     

    nLgaUMQh.jpg

     

    rYvbVbzh.jpg

     

    wBJ0speh.jpg

     

    kDAyw0Ih.jpg

     

    xIT0kFeh.jpg

     

    inNsWS8h.jpg

     

    x-posted so time stamp prevails

  6. Withdrawn. $3375/shipped to lower 48 (CA or MA will be more as well due to compliance requirements).  Nice condition pre-ban Daewoo AR-100 (later rollmarked version of the K2).  Zelle, personal check or USPS money order.  FFL to FFL.

    The original flash-hider was removed for an A2 birdcage at some point so a very similar extended length style was sourced and put on the rifle. Also, a Stormwerkz pic rail is included.

    Will come with a USGI mag in a hard case to make sure it arrives safely.

     

    x-posted so time-stamp on "I'll take it" matters

     

  7. $3275/shipped.  Nice condition pre-ban Daewoo K2.  Zelle, personal check or USPS money order.  FFL to FFL.

    The original flash-hider was removed for an A2 birdcage at some point so a very similar extended length style was sourced and put on the rifle.  Second pic shows it compared to the original Daewoo factory style on another rifle.  Also, a Stormwerkz pic rail is included.

    Will come with a USGI mag in a hard case to make sure it arrives safely.

    dkYZvlGh.jpg

    JnY0PSQl.png

    x-posted so time-stamp on "I'll take it" matters

  8. On 2/2/2022 at 9:05 PM, HFTech said:

     

    I have already Submitted x3 transfers and I am currently waiting for their Approvals. The Scanner is Awesome to say the least. It allows you to watch the print as it is being rolled and you can accept or retake it as you wish. The Lady is named Michelle. Tell her Hall's Firearms Referred you.

    The Sight is Print-Scan. You can call them @ Office: 631.782.1700.

     

    What's the price for the scanner and software?

  9. This was built by Joe at Dakota Tactical using a BRN4 lower and 416 parts kit.  The parts were from 416 kits Brownells sold and are apparently all German HK save the missing parts; the barrel (a turned down 16" US-spec MR223 barrel), bolt head and of course the Brownells lower which was apparently sourced from the original forgings so matches the 416 perfectly.  Joe laser-engraved the markings the the original Brownells rollmarks are on the front of the magwell still.

    This is brand new...only 5rds test-fired by DT to ensure function as per normal for any builder/manufacturer. $4250/shipped (venmo, zelle, check or usps money orders) via FFL to your FFL.

     

    D5D7jh4h.jpg

     

    x-posted on akfiles and arfcom....time-stamps apply to "I'll take it"

    • Like 1
  10. I have several demilled kits from police surplus guns perfect for an SOT postie build or for spares on semi-auto guns.  I can remove any F/A parts from lowers if you want to use them as semi-only and aren't comfortable with doing so.   "features a 10” button rifled barrel, chambered in 5.56mm NATO, with a twist rate of 1 in 7"

    These are parts kits and therefore not considered FFL items and also be sure and understand NFA rules.  Note: while the bolt carriers and lowers are F/A capable, using them on a semi-auto doesn't change the status as semi uppers have blocking features in place to prevent auto and burst features.  Every 556 SigSauer has made in the US already comes with a F/A capable bolt for example.

    I also have two SigSauer rear diopter sights available for $250/ea with a kit.  I'll make those available separately if not sold when all kits are gone.

    $2400 for M4 style and $2600 for Swiss folders (use real alemann-agch Swiss-made stocks...worth $4-500 on their own) + actual shipping (should be $25 or so plus any insurance with a USPS Large Flat Rate Box).  USPS money orders, personal/business/cashiers check or discrete electronic methods for tenured members of sturm (venmo or zelle)

    ---

    Kit #1 - M4 style lower (moved to GB)

    Kit #2 - M4 Style lower (SPF to Bruce Harms):

    rc25nT3.jpg

     

    Kit #3 - Swiss style lower (SPF to gunner11):

    heKBFe8h.jpg

     

    Kit # 4 - Swiss style lower (SPF to bobster_rulez):

    ND2QzfIh.jpg


    Kit #5 Swiss style lower (SPF to Ehunt)

    9WhAzirh.jpg

     

    more pics here: https://imgur.com/a/IEUgAUp

  11. I have several demilled kits from police surplus guns perfect for an SOT postie build or for spares on semi-auto guns.  I can remove any F/A parts from lowers if you want to use them as semi-only and aren't comfortable with doing so.   "features a 10” button rifled barrel, chambered in 5.56mm NATO, with a twist rate of 1 in 7"

    These are parts kits and therefore not considered FFL items and also be sure and understand NFA rules.  Note: while the bolt carriers and lowers are F/A capable, using them on a semi-auto doesn't change the status as semi uppers have blocking features in place to prevent auto and burst features.  Every 556 SigSauer has made in the US already comes with a F/A capable bolt for example.

    I also have two SigSauer rear diopter sights available for $250/ea with a kit.  I'll make those available separately if not sold when all kits are gone.

    $2400 for M4 style and $2600 for Swiss folders (use real alemann-agch Swiss-made stocks...worth $4-500 on their own) + actual shipping (should be $25 or so plus any insurance with a USPS Large Flat Rate Box).  USPS money orders, personal/business/cashiers check or discrete electronic methods for tenured members of sturm (venmo or zelle)

    ---

    Kit #1 - M4 style lower:

    e4uEABPh.jpg

     

    Kit #2 - M4 Style lower:

    rc25nT3.jpg

     

    Kit #3 - Swiss style lower:

    heKBFe8h.jpg

     

    Kit # 4 - Swiss style lower:

    ND2QzfIh.jpg


    Kit #5 Swiss style lower (SPF to Ehunt)

    9WhAzirh.jpg

     

    more pics here: https://imgur.com/a/IEUgAUp

×
×
  • Create New...